U just gave me the motivation and confidence to go ahead and tackle this job...great vid bro, very informative 👌🏾🦾

Good job! You explained the job step by step better than all the videos on KZread

I appreciate you sharing this! I just picked mine up today! I got everything except the anti seize.

Good content bro thanks 😊

Great job I didn’t notice you load that coil over over before installing it What spring rate did you go with? That engine sounds nasty, that a big block? Your car is a 10/10 hands down classy and badass I’m considering doing umi tubular with Viking coil overs on my 86 Grand National Your video is very helpful! Thanks!!

Nice video, Bruh ! I don't know if you know, but I would definitely add some anti seize on the adjustment nuts for the coil overs so they don't bind up later when you're trying to make adjustments.

I'm doing next weekend thanks for tips ..💪🏾good content

Great work my guy I like the step by step video

Hell ya brotha I’m gonna thro these on the ss thanks for the vid👍🏽👍🏽👍🏽

Good look my boy just my setup today and gonna tackle it soon got a Abody regal but I’m sure it’s the same!!! Great step by step

Much needed info for my future upgrade

Hey bro, I just referred Louie, aka Box Chevy King to you. He's on the outskirts of Memphis, but needs what you do on the regular. So just a heads up, that's his KZread name, but hope it's a benefit to you financially and also KZread, because he's tied in with some 100k + channels, think he's around 10k, but great exposure for you and your craft. God bless from BAMA

@cwhall5430

Жыл бұрын

He was thankful for the referral and said he'd definitely gonna check you out.. for whatever that's worth.

@jankyfabrications

Жыл бұрын

Mane I appreciate you so much 🤝💪🏽

@cwhall5430

Жыл бұрын

@Jankyfabrications you're very welcome, he mentioned having to try new shop, and you popped to mind... hopefully Louie does hit you up and it's a win win for you both, not yo mention the content and exposure.

Good work & Man your MCSS looks clean clean 💯... I got a lil ways to go to get mine on this level

Nice informative video!! You be doing ya thang

🚀🚀🚀This was very helpful..Most people won’t show this Becuz they rather rip people off

Do you have a instructional video for the rear coil overs?

I like what you are doing bro 🔥💯

Could you send the Link for these coilovers? please!

Great work! 💪 I got 24’s forg on my gbody Mc and the front tires rub when I do a full turn. Any suggestions for fixture without frame notch? Thank you

What are the qa1 part numbers?

Damn I need to let you do my car

From what vehicle did you get the spindle from. Mine it still og

@punch_bowl_turd3005

6 ай бұрын

might be from a s10 of some kind w/ 2 pc spindles.

Just bought a 86 cutlass on 22's and it's rubbing pretty bad. Does this solve the problem? And were you rubbing before coilovers? or what did you do no to rub?

@punch_bowl_turd3005

6 ай бұрын

i'm sure you have that fixed by now, i doubt they will cuz just replaces factory stuff. i got a 86 ss with 17x8 rims wit 3.5" bs and 245/50 tires OD supposed to be 26.6" and had some rubbing on plastic wells. had my mechanic shove the wells back some and fixed it, looks like he had frame notched out.

Got a quick question i got the qa1 front double adjustable coilovers and i got lock ring the sets up towards the top part of the shaft you put the rubber bushings at do that stay on or is it supposed to come off because i got the qa1 upper and lower arms and with that setup i had to take the snap rings off the bottom and press that t bar out

@jankyfabrications

Жыл бұрын

Do you have fb or instagram? If so masg me on my jankyfabrications page on either platform and I can better assist you

Do these coilovers lift the car also? And how high?

Kind of brakes upgrades u running

What’s your take on the Brembo swap? For a G Body

How much you charge for this

What was the Spring Rate?

What’s the part numbers?

Just subscribe 💪🏿💯