Yes, very helpful. I especially like that he explains why certain placement decisions are made.
@volocty4 жыл бұрын
Thanks for the slow methodical step-by-step process. "Thumbs up"
@lizzapaolia9597 ай бұрын
Excellent product, highly recommend. 🙏
@desmindw3 жыл бұрын
Thank you for a very detailed and clear demonstration
@davidinsolana32886 жыл бұрын
nice job young man....very helpful
@thelifeofadrywallfinisher39772 жыл бұрын
Great job thank you for taking your time to help others .
@Youngandsuccessful33 Жыл бұрын
BEST VIDEO OUT HERE!! Thank you!
@roeltovar86012 жыл бұрын
Awesome product 👍
@Purpleking473 жыл бұрын
Good stuff buddy. I'll be using this information to make a double gate.
@ricardobenitez71563 жыл бұрын
Good job 👏 my amigo,,muy bonito trabajo,,
@gojoe472 жыл бұрын
Kool I couldn't do it better, now I have knowledge very easy to understand. Bravos 👏 due
@florencehandyman92924 жыл бұрын
You are one of the few that mention outward swinging gates.. Thank you... I usually have to build a little trim frame on those.. What do you do for no gap?
@skovskycharles895811 ай бұрын
Amazing video. Thank you so much boss!!!
@richardbennett62372 жыл бұрын
Good Video, thanks for sharing ! Looks simple enough to work ... wondering now if you have a Gatemate for fences with metal posts ... ?
@JaymoJoints Жыл бұрын
This was a great video, and I'll tell you why a little later.
@sonnyheadii46585 жыл бұрын
very helpful, ty
@wmbrice9 ай бұрын
Very helpful, thank you!
@dierenfilmpjes51362 жыл бұрын
Fantastic for the money!
@DdDten3 жыл бұрын
So when you measure 1 1/4” for the hinge bolt do you drill the center of your hole on 1 1/4 or is the hole inside or outside of the 1 1/4. ?
@wwjoestarr3 жыл бұрын
Very helpful.
@3588only2 жыл бұрын
Hi Norman, this is awesome and gives tips for tomorrow installing similar gate (fortress gate) from Bunnings tomorrow. Thanks.
@snort455 Жыл бұрын
Well done!
@illarion62 жыл бұрын
Thank you so much!
@arper20002 жыл бұрын
Thank you my good Sir…….
@2pacnasgame3 жыл бұрын
I was trying to make a gate with galvanized post and wood picket boards but Home Depot and Lowe’s don’t have everything I need so I’m just going to to have to do all wood again
@raczyk5 жыл бұрын
Would mixing a cedar gate with a pressure treated fence look good? Or should you stick to one sort of wood for the fence and gate?
@fencefirst2722
4 жыл бұрын
One sort
@Legolad
4 жыл бұрын
I have mixed them and they look fine. It depends on your taste. There is no functional or technical reason not to mix them. They just have different texture and color. If that doesn't bother you, go right ahead. :-)
@rubenrios5555 Жыл бұрын
perfect thank you
@TommyVT28 Жыл бұрын
this is great just what i was looking for but have 2 gates any vidio on that 1 is 72" can be smaller if need be the small gate would make up whats left for the main in and out gate
@DdDten4 жыл бұрын
Could you add pickets to both sides so one side isn’t ugly frame without obstruction to the swing or door?
@SWINGJOMAMA
4 жыл бұрын
There is no reason why you cannot add fence boards to the inside. You will have to trim the two boards on outer edges of the gate to fit depending on how much clearance you have between the frame and post. You don't want the boards to interfere with the gate closing or opening. Also trim around the latch arm unless you want to purchase longer bolts to hold it to the frame. I would install the pickets on the outside of the gate, close the gate, install the inside pickets except for the ones on the outer edges and use a couple of scrap pieces to see how close to the edge you can install the boards on the inside and trim accordingly. Good Luck
@raczyk5 жыл бұрын
will this sort of metal frame rust over time? Would it be better to just use wood instead without the steel frame?
@kenbrake2828
4 жыл бұрын
Wood rots and steel rusts. Either one is gonna need to be maintained... Steel won't sag...
@masoudsartipi8163 Жыл бұрын
Thank you .
@elwelkin6 жыл бұрын
can i use this for my trailer ramp?
@greenthumb24892 жыл бұрын
My gate mate came with eye bolts. What are they for and how to use them?
@plumflower222 жыл бұрын
I wish I watched the video first I would have purchased this product for sure. Very good step by step video.
@erikramos31883 жыл бұрын
Yep thanks bud I have a friend that has dogs in their gate broken thank you
@3588only2 жыл бұрын
Hi Norman, Can you do the same process for a gate with brick block posts. Appreciate advise, thanks.
@normanwhitney8713
2 жыл бұрын
If you drill out the brick with a 5/8” concrete drill bit and recess the j-bolt into the brick and maybe use epoxy to hold the recessed j-bolts secure that can work.
@robsullivan853 жыл бұрын
Are the bolts long enough to go through a 6x6 post?
@normanwhitney8713
3 жыл бұрын
So they are only long enough for a 4x4 post. Sometimes I see people who just recess the bolt in the back of a 6x6 and it actually gives it a cleaner look because the bolt is mostly hidden on the backside. However you can purchase longer ones from most hardware stores.
@robsullivan85
3 жыл бұрын
@@normanwhitney8713 perfect thanks. I actually like the idea of drilling out a larger hole on the back side and recess the bolt to hid it.
@amarinayat88793 жыл бұрын
How would you install it on metal posts?
@abbeyhardware
3 жыл бұрын
This is designed for wood applications, but could possibly accomodate if the metal was a heavy enough guage, but if overtightened could bend the metal.
@Hotled19442 жыл бұрын
What about steel posts?
@qamardhanani17663 жыл бұрын
f the framing is on the inside of the fence, then how do we open this gate from the outside? I am asking because I don't see any latch on the outside. Please let me know asap! Thank you.
@abbeyhardware
3 жыл бұрын
Hello, we recommend the EZ Gate Latch, or simply attach a string to the latch and feed it through a small hole in the post
@2pacnasgame3 жыл бұрын
What color are those board
@syafudin83623 жыл бұрын
good
@trvlswitrv3 жыл бұрын
How does the gate open from the outside? You didn’t show the complete hardware needed for an entrance gate
@qamardhanani1766
3 жыл бұрын
home depot has the gate that has latch that opens from outside model#AG36-3
@Helpfulsuggestions3 жыл бұрын
So the metal never gets bolted together??
@abbeyhardware
3 жыл бұрын
Correct, the 2 2x4s hold the metal frame to the desired width.
@2pacnasgame4 жыл бұрын
I think the reason the gate sags is the post starts to get old they rott and move
@mrreams711
4 жыл бұрын
They sag well before rot forms. Corners are not held at 90 degrees therefore they sag, turning into a parallelogram.
@Markymark12342 жыл бұрын
How much for a 54 inch set?
@robsullivan853 жыл бұрын
What if I have 6x6 posts?
@bozzcrezo11603 жыл бұрын
What size are the J-bolts?
@abbeyhardware
3 жыл бұрын
They are 5/8" x 6", but you can purchase a long length of needed.
@tedwisneski12863 жыл бұрын
What is part number where you buy it
@abbeyhardware
3 жыл бұрын
Hi, the standard one is 7010003, and wide is 7020003. They can be purchased through www.gatehardwarestore.com
@TommyVT28 Жыл бұрын
i cant find gatemate any where
@prophetseven7282 жыл бұрын
You should of shown the whole job after your done. It was zoomed in the whole time!?!
@soledadaguirre41063 жыл бұрын
Where to buy
@abbeyhardware
3 жыл бұрын
Hello, you can order those online at gatehardwarestore.com, our retail online division. Thank you!
@warlionx.6632 Жыл бұрын
website has no prices in the pictures of products, so you can not buy online, bad start.....
@abbeyhardware
Жыл бұрын
Hello, Sorry for the inconvenience. We are primarily a wholesaler, but you can order the product on our online store at www.gatehardwarestore.com, or give us a call and we can see if there is a distributor in your area. 510-568-8885
@jayanonymous63104 жыл бұрын
Yes. If you want your gate to open inward. Follow this video step by step. It you want it to open outward like I did and messed up my posts following these directions - do NOT follow these directions lol. I feel like this guy owes me a post. Smh
@DdDten
4 жыл бұрын
He’s says in beginning outward swing go to other post.
@jayanonymous6310
4 жыл бұрын
@DdDten negative the cedar hits. Wood. Tried it. It’s an inward opening gate. Try it lol. Doesn’t matter. Switched it to open inward.
@jayanonymous6310
4 жыл бұрын
What I mean is when u want it to open outward because it’s a bolt u and not a hinge gate the cedar will hit ur post and not open all the way. I was 1.25 inches on the other side (like he said). Can’t get any closer than that. Regardless it’s sturdy just not for outward opening gates unless u want some odd looking space so the cedar can clear when u open outward. Or if u want ur cedar on the inside LoL! Look silly as hell from the street.
Пікірлер: 80
Yes, very helpful. I especially like that he explains why certain placement decisions are made.
Thanks for the slow methodical step-by-step process. "Thumbs up"
Excellent product, highly recommend. 🙏
Thank you for a very detailed and clear demonstration
nice job young man....very helpful
Great job thank you for taking your time to help others .
BEST VIDEO OUT HERE!! Thank you!
Awesome product 👍
Good stuff buddy. I'll be using this information to make a double gate.
Good job 👏 my amigo,,muy bonito trabajo,,
Kool I couldn't do it better, now I have knowledge very easy to understand. Bravos 👏 due
You are one of the few that mention outward swinging gates.. Thank you... I usually have to build a little trim frame on those.. What do you do for no gap?
Amazing video. Thank you so much boss!!!
Good Video, thanks for sharing ! Looks simple enough to work ... wondering now if you have a Gatemate for fences with metal posts ... ?
This was a great video, and I'll tell you why a little later.
very helpful, ty
Very helpful, thank you!
Fantastic for the money!
So when you measure 1 1/4” for the hinge bolt do you drill the center of your hole on 1 1/4 or is the hole inside or outside of the 1 1/4. ?
Very helpful.
Hi Norman, this is awesome and gives tips for tomorrow installing similar gate (fortress gate) from Bunnings tomorrow. Thanks.
Well done!
Thank you so much!
Thank you my good Sir…….
I was trying to make a gate with galvanized post and wood picket boards but Home Depot and Lowe’s don’t have everything I need so I’m just going to to have to do all wood again
Would mixing a cedar gate with a pressure treated fence look good? Or should you stick to one sort of wood for the fence and gate?
@fencefirst2722
4 жыл бұрын
One sort
@Legolad
4 жыл бұрын
I have mixed them and they look fine. It depends on your taste. There is no functional or technical reason not to mix them. They just have different texture and color. If that doesn't bother you, go right ahead. :-)
perfect thank you
this is great just what i was looking for but have 2 gates any vidio on that 1 is 72" can be smaller if need be the small gate would make up whats left for the main in and out gate
Could you add pickets to both sides so one side isn’t ugly frame without obstruction to the swing or door?
@SWINGJOMAMA
4 жыл бұрын
There is no reason why you cannot add fence boards to the inside. You will have to trim the two boards on outer edges of the gate to fit depending on how much clearance you have between the frame and post. You don't want the boards to interfere with the gate closing or opening. Also trim around the latch arm unless you want to purchase longer bolts to hold it to the frame. I would install the pickets on the outside of the gate, close the gate, install the inside pickets except for the ones on the outer edges and use a couple of scrap pieces to see how close to the edge you can install the boards on the inside and trim accordingly. Good Luck
will this sort of metal frame rust over time? Would it be better to just use wood instead without the steel frame?
@kenbrake2828
4 жыл бұрын
Wood rots and steel rusts. Either one is gonna need to be maintained... Steel won't sag...
Thank you .
can i use this for my trailer ramp?
My gate mate came with eye bolts. What are they for and how to use them?
I wish I watched the video first I would have purchased this product for sure. Very good step by step video.
Yep thanks bud I have a friend that has dogs in their gate broken thank you
Hi Norman, Can you do the same process for a gate with brick block posts. Appreciate advise, thanks.
@normanwhitney8713
2 жыл бұрын
If you drill out the brick with a 5/8” concrete drill bit and recess the j-bolt into the brick and maybe use epoxy to hold the recessed j-bolts secure that can work.
Are the bolts long enough to go through a 6x6 post?
@normanwhitney8713
3 жыл бұрын
So they are only long enough for a 4x4 post. Sometimes I see people who just recess the bolt in the back of a 6x6 and it actually gives it a cleaner look because the bolt is mostly hidden on the backside. However you can purchase longer ones from most hardware stores.
@robsullivan85
3 жыл бұрын
@@normanwhitney8713 perfect thanks. I actually like the idea of drilling out a larger hole on the back side and recess the bolt to hid it.
How would you install it on metal posts?
@abbeyhardware
3 жыл бұрын
This is designed for wood applications, but could possibly accomodate if the metal was a heavy enough guage, but if overtightened could bend the metal.
What about steel posts?
f the framing is on the inside of the fence, then how do we open this gate from the outside? I am asking because I don't see any latch on the outside. Please let me know asap! Thank you.
@abbeyhardware
3 жыл бұрын
Hello, we recommend the EZ Gate Latch, or simply attach a string to the latch and feed it through a small hole in the post
What color are those board
good
How does the gate open from the outside? You didn’t show the complete hardware needed for an entrance gate
@qamardhanani1766
3 жыл бұрын
home depot has the gate that has latch that opens from outside model#AG36-3
So the metal never gets bolted together??
@abbeyhardware
3 жыл бұрын
Correct, the 2 2x4s hold the metal frame to the desired width.
I think the reason the gate sags is the post starts to get old they rott and move
@mrreams711
4 жыл бұрын
They sag well before rot forms. Corners are not held at 90 degrees therefore they sag, turning into a parallelogram.
How much for a 54 inch set?
What if I have 6x6 posts?
What size are the J-bolts?
@abbeyhardware
3 жыл бұрын
They are 5/8" x 6", but you can purchase a long length of needed.
What is part number where you buy it
@abbeyhardware
3 жыл бұрын
Hi, the standard one is 7010003, and wide is 7020003. They can be purchased through www.gatehardwarestore.com
i cant find gatemate any where
You should of shown the whole job after your done. It was zoomed in the whole time!?!
Where to buy
@abbeyhardware
3 жыл бұрын
Hello, you can order those online at gatehardwarestore.com, our retail online division. Thank you!
website has no prices in the pictures of products, so you can not buy online, bad start.....
@abbeyhardware
Жыл бұрын
Hello, Sorry for the inconvenience. We are primarily a wholesaler, but you can order the product on our online store at www.gatehardwarestore.com, or give us a call and we can see if there is a distributor in your area. 510-568-8885
Yes. If you want your gate to open inward. Follow this video step by step. It you want it to open outward like I did and messed up my posts following these directions - do NOT follow these directions lol. I feel like this guy owes me a post. Smh
@DdDten
4 жыл бұрын
He’s says in beginning outward swing go to other post.
@jayanonymous6310
4 жыл бұрын
@DdDten negative the cedar hits. Wood. Tried it. It’s an inward opening gate. Try it lol. Doesn’t matter. Switched it to open inward.
@jayanonymous6310
4 жыл бұрын
What I mean is when u want it to open outward because it’s a bolt u and not a hinge gate the cedar will hit ur post and not open all the way. I was 1.25 inches on the other side (like he said). Can’t get any closer than that. Regardless it’s sturdy just not for outward opening gates unless u want some odd looking space so the cedar can clear when u open outward. Or if u want ur cedar on the inside LoL! Look silly as hell from the street.
Not, I don’t like it,
Try to do it with Woodglut plans :)