I have updated how I run my Livescope in my boat. Here is the video! kzread.info/dash/bejne/aWWf0NRwo63fg5M.html

I installed this optic on a crossman 760 air rifle.I have now shot the riffle around 500 times during target/plinking practice, and the kzread.infoUgkxc4K63Fd5LglDMObu7-Bgapxp_ef0W8hE scope has done well.With this optic, I have neutralized around 30 pigeons that were invading one of my buildings.For my short range air rifle, I will continue to use this scope, but will be upgrading to a more powerful scope, when I buy a more powerful air rifle, in order to shoot at longer distance.For the money I have spent, this scope has truly been a great buy.

Easy to use and effective

Great info!

@tjsguideservice

2 жыл бұрын

Thank you! Glad you enjoyed!

Great video. It causes me to rethink my livescope set up plan.

@tjsguideservice

8 ай бұрын

Thank you! I’ve actually changed my set up since this video and I have liked it a lot better! Here’s the link. kzread.info/dash/bejne/aWWf0NRwo63fg5M.htmlsi=RS_V3SZXAzSvcp6F

@TeamJesusOutdoors

8 ай бұрын

I had watched the second video, prior to seeing the first video, and while I do love that set-up, it is way to pricey for me.

@tjsguideservice

8 ай бұрын

@@TeamJesusOutdoors it definitely a more expensive option! This one definitely is a little cheaper, but the pole may move a bit when you stay moving! Still works though!

very nice bro...I like the set up...Just googled summit pole with the livescope. Getting excited for ice, and was looking for ice ideas, but saw your video and it looks nice. maps on right, side/down imagine in middle, and livescope on the right..what else you need...I like it man

@tjsguideservice

Жыл бұрын

I love this set up for my boat! I should note that I have since switched to an arclab pole and boat set up as well as their ice shuttle and I love it! Better quality parts and I can troll faster in the boat without my pole slipping. I would check them out! arclab-motorsport-fabrication.myshopify.com

Great video

@tjsguideservice

2 жыл бұрын

Appreciate it, Goose! 👊

Thanks TJ

@tjsguideservice

2 жыл бұрын

Thanks, Mat! 👊

I have a Ranger boat which I have stored in Walker. I’ll be heading that way for a couple of weeks of late fall walleye. I have a Helix 10 on the dash and after watching your video I’m planning on a D ram ball on the gunnel. I know the Ranger has narrowed the gunnel so I’m hoping it fits. Never drilled through gel coat but have watched video on how to. Do I screw this in or bolt it in? Not sure if there are wires running that high in the gunnel. Not sure if there is access to get a nut on the bolts. I’ll have to look at the cup removal option to run wires. I have a rail which comes close enough to me while sitting at the helm to run the Livescope which I’ll mount on the rail. With an Ultera I’ll be able to run and gun without leaving my seat. In the spring I fish crappie so I’ll have it mounted on the rail on the bow. Thanks for your suggestions.

@tjsguideservice

Жыл бұрын

That’s a great idea! I do want to add that I just actually upgraded my pole system. I switched over to an Arclab pole system and have been loving it! It adds a lot more stability while still being able to run and gun quickly. They make a ton of different options for a bunch of different boats. If you haven’t already bought your parts - might be worth checking out! Here’s the website - arclab-motorsport-fabrication.myshopify.com

Great vid, but have a couple questions about setup, I have an ice bundle but haven’t seen any settings for the boat with the ice bundle, do u have a video on that?

@tjsguideservice

Жыл бұрын

Hi Todd. Thank you. This video may be helpful. Let me know if you have other questions. kzread.info/dash/bejne/aWWf0NRwo63fg5M.html

Do you have a link for the piece that connects the ram mount to the pole itself?

Good video TJ. Mounted like that could you track downrigger action?

@tjsguideservice

2 жыл бұрын

Thank you! I’ve never tried it but I’m assuming you could at least see your ball. Also, this pole I have a tough time getting to stay sturdy when I get 3-5mph +

@andrewduncan2070

2 жыл бұрын

@@tjsguideservice thanks TJ. Hope you do an update of how system worked after you use it this summer. I think that is super helpful for all of us.

Nice video! I just added mega live to my fishing arsenal and I decided to go with the summit pole as well. Have you looked at their stabilizer plate? It’s out of stock right now, but I will be ordering it to help keep the pole from moving.

@tjsguideservice

5 ай бұрын

Congrats man! I haven’t used there stabilizer plate, but I’ve actually upgraded my whole system to the arclab system! I believe arclab has a plate compatible with the summit pole as well

@positivelyfishing1810

5 ай бұрын

@@tjsguideservice Yeah, I actually watched your update video after I made that comment. That arclab plate looks a lot like the summit one. Did you notice a big difference after you added the stabilzer plate? It seems like it would make a big difference.

@tjsguideservice

5 ай бұрын

@@positivelyfishing1810 absolutely! It made a world of difference! Can get 4-5 mph now

Hi TJ, do you have issues with the ram mount for your livescope when moving at trolling speeds where the pole pivots? Hard to stay vertical

@tjsguideservice

3 ай бұрын

Absolutely! That’s why I switched to the arclab set up (I have a new video with that set upon my channel too)

I’ve been waiting for a video like this. Thanks so much! Question about the summit pole mount. I have the their ducer pole for ice fishing and I’m looking to buy their boat mount. Would you recommend their 9" (or 6”) double ball arm and 2.5" round ball mount, or would it be better to buy those parts separate and go with bigger ball mounts to reduce pole wobble when moving faster than 2mph? Sorry for the loaded question. 🤓

@tjsguideservice

2 жыл бұрын

Glad you enjoyed it! Honestly, I would love to see that same mount in the bigger size ball. I feel like it would solve a lot of stability issues! If you can just by the boat mount part without the ram, I would do that separately. Not sure if the bigger size ram would be too big to mount on the pole or not. I do know that Arclab makes a mount that is much sturdier, but since you already have the pole, it makes sense to just add the ram mount and boat mount. I would go with the 6” if you don’t need the length to get over the side of the boat. The longer it is, the less stable it will be. Hopefully that all makes sense!

@jmrobertson100

2 жыл бұрын

@@tjsguideservice That is super helpful. Yep, I follow you on all of that. Thanks again man. Again, this video answered sooo many questions, specially the pros/cons of each method. Solid bro.

@tjsguideservice

2 жыл бұрын

@@jmrobertson100 awesome! Glad it was helpful! Good luck my friend!

@davidgoodberry4679

Жыл бұрын

@@tjsguideservice Would the Arclab PG-5000 work with the Summit Pole and be sturdier?

@tjsguideservice

Жыл бұрын

@@davidgoodberry4679 I don’t think they would work together because the pg-500 requires the rotational part of the arclab pole. And you are still dealing with the instability of the ram mount under pressure from water

Do i need a garman screen for my live scope or can hook up to my lowrance hds7 and 9?

@tjsguideservice

Жыл бұрын

You need a Garmin screen unless you have the lowrance active target

Could you add a separate mount and move it to the bow?

@tjsguideservice

Жыл бұрын

Yes absolutely!

I want to set my live scope up like your. I have a minn kota i pilot 112 , lowrance hds 7 and a hds 9 . Where does the trolling motor hook up to? I have to buy a new garman display for my live scope. Thanks trying to hook all this up.

@tjsguideservice

Жыл бұрын

The trolling motor should hook up to your 36v system. Do you have the livescope trandsducer already?

@robertrichardson343

Жыл бұрын

Yes. I have the black box and part that attaches to trolling motor garmen live scope with out display screen. I am looking to buy one but want make sure everything will work together.

@robertrichardson343

Жыл бұрын

@@tjsguideservice i still have to buy my 3 batters mounting plate, brackets to hold my lowrance HDS7 and HDS9. A screen for garmen live scoop, I do have the black box and part the mounts to trolling motor.

TJ where to buy the transducer pole for the live scope

@tjsguideservice

Жыл бұрын

Hi Gene, that one was from summit. Since I made this video I have actually found a pole that I like better and that is sturdier and those can be found here: arclab-motorsport-fabrication.myshopify.com/collections/transducer-pole-boat-mounts

@roberthalstead4772

Жыл бұрын

@@tjsguideservice I like the ArcLab pole setup also. Thanks !

I mounted my unit sideways like that but my screen was reading backwards in forward mode. What am I doing wrong?

@tjsguideservice

Жыл бұрын

That is how it is always set up. Not sure if you can change that. Might take a bit to get used to, but just knowing which way the handle is going and making sense of it from there

What length of pole did you go with?

@tjsguideservice

2 жыл бұрын

I intended to go with the longer one, but accidentally ordered the shorter one and I haven’t had an issue! With that being said, if I were to do it again, I would probably order the longer one just to be safe!

@davidgoodberry4679

Жыл бұрын

@@tjsguideservice There's 3 sizes on the summit pole 36", 60" and 80" so you had the 60" and it was fine in the water column? What size it the arclab one you have now?

@tjsguideservice

Жыл бұрын

@@davidgoodberry4679 I believe I had the 24-60” and it was fine. The arclab on I have right now is 28-50” with another pole that give an extra 12” or so? It’s the 5200 series pole.