Garage Door Opener Arm Ripped Out? Install This!
Тәжірибелік нұсқаулар және стиль
If your garage door opener arm ripped out of the top section this video is for you! This part is also great if the bolts keep stripping out of the stile, or if your garage door stile has come off your garage door.
You can buy the parts here:
21" ORB from Amazon - amzn.to/3frIhil
Adjustable ORB from Amazon - amzn.to/3Ghg6hK
Reprogramming limits on newer Liftmaster, Craftsman, and Chamberlain openers - • How To Set The Limits ...
Hope this was helpful, and if so you know what to do with the like and subscribe buttons! (:
This channel contains affiliate links to products. We may receive a commission for purchases made through these links (at no additional cost to you of course). Thank you for supporting us this way (:
Feel like supporting us with a tip? Venmo link below (:
account.venmo.com/u/garagedoo...
Пікірлер: 15
I was about to call a company to fix it until I saw this! Thanks for saving me a few hundred bucks!!!
@GarageDoorGuidance
Жыл бұрын
Hehe that’s why we’re here
Very helpful! Thank you!
I fixed my garage door! Thank you!
Great video! One of the screw holes attaching my operator bracket is stripped. If I attach the reinforcer with two of the three screws on the operator bracket (plus the lower ones by the hinges), will the reinforcer be enough to help the door safely open and close?
@GarageDoorGuidance
Жыл бұрын
It should be enough yes, you can always use self tapping screws to add more as well 👍🏻
What type of screws did you use to attach the bracket to the garage door?
@GarageDoorGuidance
Жыл бұрын
amzn.to/3U1rOVv These self tappers would work well 👍🏻 ( affiliate link )
The screw and bolts came out of the black arm you attached the bracket to. I put them back in but when I close the door it opens back up and the light flashes. What am I supposed to do
@GarageDoorGuidance
Жыл бұрын
Were they put back into the same exact spots as before? Are your safety sensors aligned?
@brandonsims3890
Жыл бұрын
@@GarageDoorGuidance I figured it out once I got off of work. They were in the wrong spot though. Once I aligned them with the wear marks it's works again. Thanks
@GarageDoorGuidance
Жыл бұрын
Sorry for slow replies Brandon. KZread’s notification system needs work lol
Where can I get one of these brackets?
@GarageDoorGuidance
2 жыл бұрын
Link should be in the description?
@waynehwaszcz4959
7 ай бұрын
@@GarageDoorGuidance 4:09