Thank you, very informative as like others I have to get over the price issue. Keep the learning coming. Cheers.

Thank you, I have learned a lot from your Gap Tool videos. Keep em coming!

@notthatkindofachannel

2 жыл бұрын

Hey marck! Thank you 😊

Hi Peter, thanks for the great video. One should be careful NOT to engage the "recondition" mode of a charger while the battery is connected to the electric system of the car because in this mode the charger uses higher voltage peaks than in the normal charging mode. This can (and has in the past) destroy electronic components in the car! In the video you are using the MXS 5.0 model of ctek. This has no "supply" mode, which you need for operations with the IID Tool, which take a longer time, to prevent the battery from discharging. The charger you have linked is the right one, because the model MXS 10 has this supply mode. Thanks for this useful link! Keep on "DISCOVERING" and reporting. Thanks.

@notthatkindofachannel

2 жыл бұрын

Hi @EGE-hoj! Thank you very much for your input! Then I will exchange my MXS 5 right away. (I have added it to the video in the description.) because I thought it would be possible to maintain both battery power without supply mode. Especially as the IID tool also shows a higher voltage during the charging process, or this also remains constant over a longer period of time. All the best, Peter

Very informative thank you 👍

@notthatkindofachannel

2 жыл бұрын

Thanks 🙏🏻

Another very informative video my friend, this is one my list of things to buy for the disco, but like you say, it's expensive, and the price is delaying the purchase, it will come in handy tho, and the wife has just got herself a discovery sport, so I'm sure it'll get used on that too. Have a good one.. 👍

@notthatkindofachannel

2 жыл бұрын

Hello @beenzer! Yes I know it's not cheap, but it has already saved me a lot of money because of the things mentioned in the video. And I think if you still have a Land Rover, it will certainly pay for itself. By the way, I had a Discovery Sport myself before! It cost almost 100€ to read out the error! Have a nice Sunday, Peter

Thank you Peter for your videos!!! Can I have more info in regards the plug you have had installed on your Disco in order to connect the battery charger. Many Thanks 👍

@notthatkindofachannel

Жыл бұрын

Hey, for sure! I am using this plug from CTEK to connect my charger to the battery => amzn.to/3A5MwdQ Best, Peter

Your meant to run the vehicle while using the iid. No need to connect to a charger.

Hi, can it lift the car more than the normal HI mode? Will it override the EAS in case of a failure? Thank you. Great video 👍

@notthatkindofachannel

Жыл бұрын

No, unfortunately, it cannot be calibrated beyond the working range of the sensors. However, the driving height etc. can be adjusted. All the best, Peter

Hi Peter, could you make a video on how to level the Discovery for Camping with the GAP IID tool? I often read about it but never found a good explanation on how to do it.

@notthatkindofachannel

Жыл бұрын

Hey @OhTenenbaum, thanks for the input! I think this is a good idea and I’ll figure out how to show this is done in an easy way! All the best for you, Peter

Hi Peter, I just received the iid Tool from another disco 4 owner that doesn‘t know how to use it. Did I unterstand you correctly that I need to pay about 70 bucks to use it on my lr4? Any suggestions on how I can get started w/ this Bluetooth device? Best, Reto

@notthatkindofachannel

8 ай бұрын

Hello, yes, that is correct! You need to buy another license for each car you add. If you have the Pro version, this is not necessary. Best to you, Peter

Are you using IIDTOOL G3 or with the PRO G3 in this film?

@notthatkindofachannel

11 ай бұрын

Hey, I’m using the IID Tool G3. The pro version would be too much for me as a private person. Greetings, Peter

The price is a killer. Question where do you get the physical key cut? Is the key cut at specialist locksmith and you program the key?

@notthatkindofachannel

5 ай бұрын

The price is quickly put into perspective if you have a few problems with the vehicle, as Land Rover in this country wants €120 for a one-off deletion of faults. Yes, just take the key to a locksmith and have it replaced for a few €, $... etc.

I would have liked the tool, but it’s hard to justify the price for an old vehicle that isn’t valued that much more.

Nothing personal, but today in this world if I can control "hate" (height) level, I would buy it in a hart beat. LOL. Seriously. Can I use this tool to program a new or used TCM module?

@notthatkindofachannel

2 жыл бұрын

It should already be possible as long as the TCM corresponds to the same series. Because you can also flash them for improvements or updates. I can't say for sure, but I could ask GAP if you want. All the best

@t2rx7crx1

2 жыл бұрын

@@notthatkindofachannel thank you.

ii means 2 not eye eye. It is a GAP 2D tool

@notthatkindofachannel

Жыл бұрын

Hey Sean! IIDTool stands for Integrated Interface Diagnostic Tool 😉 So there is no 2D in IID. Best, Peter

if it's $500 and not good for current vehicles then it's shit

@notthatkindofachannel

Жыл бұрын

Hey, hey! Well, the new models are already supported if you look at the GAP website. It just takes a little while until all functions are finally available. But in my opinion this is not due to GAP Diagnostic but rather to Land Rover, which does not like to provide information about their vehicles for independent workshops etc..

@Mac_F87

6 ай бұрын

It’s the same for most newer cars. VAG changed protocols so now VCDS has limited functionality on newer models. Manufactures are doing it to make it harder for independent garages unless they buy access to the main server and use their software which costs ££££ not to mention make it even harder for us DIY guys.