GAN 14 Pro - Is it Actually an Improvement?
Ойындар
Purchase the GAN 14 Pro: www.thecubicle.com/products/g...
The GAN 14 Pro aims to fix the original 14's most infamous problem: popping. The pro has a much larger edge torpedo, and also features a new center cap design. Let's see how these changes affect the cube!
------------------------------------------------------------------------------------------------------
Want to learn from some of the best competitive speedcubers? Check out Cubing.gg!
www.cubing.gg/
Twitch: / thecubiclestream
TikTok: / thecubicle.official
Instagram: / thecubicleofficial
Facebook: / thecubicleofficial
Join our Discord community: / discord
Пікірлер: 169
I appreciate that you were completely honest with your review, that you shared your negative feedback even though you sell these cubes. And that you tried everything to improve the cube. Also the intro was super for adding more transparency.
I appreciate that you guys just tell it like it is. Really not a fan of GAN or any other company trying to control the narrative in that way, that's kind of concerning. Unless there is something I'm missing from their side of things.
I have the GAN 14 MagLev Pro and it's really good for my weak fingers. I perform finger tricks much better on this cube. (SUB8 Solver here) My setup: 2- top ring 5- gear at the bottom Max magnets for both corners and edges. I just noticed that the Cubicle team don't really like light-turning cubes. They always put control lubes on their GAN cubes. I don't put any control lube. I prefer fast cubes that don't give you finger fatigue.
@kyh148
2 ай бұрын
W light turner
@vtcubing
2 ай бұрын
nice to see sub 8 solvers using this cube(sub 9 solver with tornado v3 amd ys3m as maina nd backup respectively)
@inseminggd9435
2 ай бұрын
you might be the specific type of cuber that they said in the video then
@joemurray1993
2 ай бұрын
I do left index finger push for U moves (clockwise) and left ring finger push for D' like what u do with E-Perm. It's easier to do on Cubes like the GAN 14 pro, because it auto-aligns well, and turning is very light and effortless.
@WTF-WithTheFlow
Ай бұрын
I have strong, working man hands and fast, light turning cubes are a no go for me. I need a little extra resistance. I treat it like a finger exercise! 😅
I like the idea of the center remover as someone with basically no nails from nervous biting but it becoming necessary to have with you to pop the cap off is quite a tradeoff..
@chunmanwan4611
5 күн бұрын
Every time I change the cube settings in Gan cubes my finger nails break😂
the main issue is that GAN tries to increase customisation features instead of improving on their previous flagship,the 14 could have been a lot popular if they just improved on the 12.if you look at MOYU,they try to improve on their previous cubes,thats why they are so popular -same with X-MAN,they simply improved on the tornado v2 and thats why the Tornado v3 became so popular(they just improved on the corner cutting and simplified adjustment for compression and center travel) -last point:if GAN really wants to increase customisation,make sure that atleast 70% of the settings are good,no one wants 1296 options,also this cube proves that maglev tech is not better,and the tornado flagship just proves it,and i think springs are better than maglev(subjective opinion)
@kyh148
2 ай бұрын
You can't make a majority of the combinations "good". The settings are independent of eachother. People like their cubes differently, and it makes no sense to just add the "good" combinations, because then you're heavily restricting people from fine tuning their own cubes. I think the 14's system is actually a pretty good idea. And also, not everyone likes the Tornado. Personally I think the flagship is way too slow.
@vtcubing
2 ай бұрын
@@kyh148 the adjustment of the 14 is amazing and you are right about your concept of fine tuning and yeah its true that not everyone likes the tornado but my point was that they just could have improved upon the 12
@vtcubing
2 ай бұрын
I also wanted to add that the gan flagships(13and the 14)are not popular among the general cubing community as compared to their previous cubes like the sm,x,xs,11 and the 12
@inseminggd9435
2 ай бұрын
@@kyh148 i guess, but from what ive seen you cant even find a roughly good combination for people who like slower cubes, and i think that as a company it would be better for them to make a cube that somewhat suits both people who like slower and faster cubes, instead of giving more options to the people that like overly fast ones
@kyh148
2 ай бұрын
@@inseminggd9435 Gan cubes are fast... That's like a key feature...
I like how the cubicle makes all their videos extra entertaining, going beyond the title purpose of the video I really enjoy and appreciate it
I have the Gan 14 Maglev Pro and I think it is great. I have got a few great solves with it. I love how good the cube's cornercutting is.
I have the GAN14 PRO. I agree that it's really fast. But I like that feel and it's so satisfying to turn. It also has the best Auto-alignment I've seen on a cube, maybe Super Weilong would be 2nd. I also think TheCubicle don't adjust their turning style. You have to turn differently when using GAN vs Moyu or other brands. It's just so much satistying to turn fast cubes. You won't feel sore after long periods of practice.
@joemurray1993
2 ай бұрын
I have it too. The magnetic pull is incredible. It self aligns on literally any angle (if set to max magnet strength) it just refuses to mis-align. I perform well on it.
@Vihaan912
2 ай бұрын
i agree
@WilkesFamilyPB
2 ай бұрын
I agree with the auto alignment
@dont_rage_dude
Ай бұрын
does it worth to upgrade from the 14?
@alisyed294
Ай бұрын
I’m thinking of getting the 14 or 14 pro, but haven’t decided which one to go for. Any advice would be greatly appreciated. In terms of auto-alignment, I found the wrm v9 to have the best (on factory settings, out of the box). Or maybe the GAN 12 maglev. I haven’t tried the GAN 13 or 14 yet. The super weilong has weaker magnets than the wrm v9, so didn’t auto align quite as well, but definitely still up there as one of the best. And overall I usually perform slightly better on the super weilong compared to the v9. Gonna pick up a v10 too and see how that is. Have heard it’s a completely different cube.
I really love the honesty of these guys. Some "improvements" end up being a disfavor, gan has been doing fails releases like gan 14 capsule, megaminx maglev which is really not as good as Dayan pro and is way more expensive.. looks like now they are only concerned in profits.
How _DARE_ you remind me of MMAP's existence. I haven't thought about him in more than a decade. I used to love his videos.
I don’t know how to feel about this. Usually when I see all these fancy new cubes I really get excited, but this feels different. I’ve got a RS3M 2022 or something and think i’d actually prefer that than these ones with the funky center caps, complex designs etc
@hektikvids8663
2 ай бұрын
See I know I won’t feel much difference from the 14 but my eyes are begging for me to buy it but my brain says no
Thanks for the honesty.
Actually yes the center caps were a tad bit necessary. The old ones were very fragile and my friend broke one in the first day of him having it. Did they need to make the cap pieces longer? No, but they could have made them wider and a bit thicker.
I wouldn't be surprised if what's happening is that the tolerance has increased. If you take out a corner, edge, corner, stack them together and use calipers to measure, what's the width of those pieces?
@JRCuber
2 ай бұрын
a rare cyoubx spotted in the wild?! 😮 I think you might be right though, I’m gonna check on monday
@ButteryCubes
2 ай бұрын
woah it's cyoubx
@asmallkitten
2 ай бұрын
Oh hey bro
@cyoubx
2 ай бұрын
@@asmallkitten ohai :3
@ImNotPeso
2 ай бұрын
@@JRCuberwhat were the findings?
The issue with my GAN 14 is that the center caps keeps popping even when I’m not doing any fast movements, just normal scrambling pops the center caps off so the longer center cap prongs really help
Damn that last layer skip meme of MeMyselfandPi took me way back. I'm old
I used the 11 pro for ages as my main, loved it, my second was the tornado v2, liked the smoothness of it but didnt like the feel as much. Just recently bought the 14 and the tornado v3. Tornado v3, pioneer, and the v3 is my new main. Better ans much cheaper.
Max Park needs a cube like this so he can finally do efficient U2's with a single flick!
i think if phil learns some zblls,he can easily bbecome sub 10 regularly(currently he is slightly inconsisetent),btw the review is amazing as always
Phil: "All right, Gan 12" *gets Last layer skip*
@FinJohn
23 күн бұрын
6:19
Commenting on the Gan 14 Pro ❌ Commenting on Phil's casual LL skip ✔️
CUBICLE THERE IS A NEW MOYU CUBE! The wrm v10 with a new adjustment system
I really don't give a crap about Gan anything. . . . . . I only opened this video to support TC with a LIKE and a view here bwcause they are great😎
@asmallkitten
2 ай бұрын
Thanks my friend
phil trying to do nomal plls when he uses the wrong coll is so funny
I definitely prefer moyu cubes. It's more stable than anything else.
Why don't they just add more features to the Gan 12. Everybody already loves that cube, so if they made more features on it people are more likely to buy it. Like my Gan 12 UI feels better than the thirteen, and its a smart cube. I just feel like that would make sense.
That MMAP clip tho... Jesse is definitely a cubing boomer
So the designer told me few days ago that the tool is to let the center cap to take away more easily so you don’t have to break your nails, btw gan15will keep on using it
@JRCuber
2 ай бұрын
I have no problem with wanting to make it easier to remove the caps, I just find it baffling that they’ve made it impossible to NOT use the tool. They’ve removed a core function that has been on basically every cube in existence. They could have just added a little flat pry tool or something. This seems entirely unnecessary.
@kangcarr
20 күн бұрын
any predictions on when the Gan 15 will release to the public?
@I292B
19 күн бұрын
@@kangcarr they didn’t really mentioned it, put probably the end of this year I guess
@I292B
19 күн бұрын
@@kangcarr and gan 15 is a really good cube in my opinion, but I still didn’t see ball cores on the test version
Yiheng,Tymon,Matty, and most of the gan sponsors use it
i love your honestly
whats the app they use for tracking times? or is it just cstimer?
I'd be curious to turn the release version but this isn't my cube, I'm sure-I just don't have the skill for it.
phil having an emotional support plush sitting on his lap gives me life
the gan 14 pro that i bought is drowned in slow lube but it is still pretty fast
seeing phil rage shows how fast it is lol
@tamojamoh8550
2 ай бұрын
@MelanieSiazon
2 ай бұрын
.
@tamojamoh8550
2 ай бұрын
@@MelanieSiazon I can see u
@ujaanneer-speedcuber9750
2 ай бұрын
i swear to god pause the video at any random moment and you can make a meme out of phils face 😂
@inseminggd9435
2 ай бұрын
ㅤ
Why is no one talking about the new limited edition 356 M E and iCarry? The sail version.
I think you should invite guys who likes to solve fast cubes and see if it suits them.
GAN 12 is still the legend :))
Why gan is not doing black internals??
GAN fell off so hard its actually insane
that knife
Gan be spending more budget on packaging than on their cubes💀
the mmap clip lmaooo
Que feo saber que en mi país es demasiado difícil comprar los lubricante Armstrong.
why do they need a centercap remover
6:17 bro how old is this clip i need source
I love the 14pro… it basically auto aligned for me
So many different settings and all of them are unusable. Do they test settings before releasing cubes?
Are there going to be reviews on the Gan 5x5 and the Gan Megaminx v2?
GAN making a better 3x3 than the GAN 12 challenge (impossible)
Gan should manufacture other kinds of rubik cube such as 6×6,7×7 or upgrade their old shape shifted cubes because there are too many Gan 3×3 cubes and most of them are so good (not the price😂)
So Gan 12 Maglev still the best Gan on the market. I've got mine for 3 years and can't complain. Much easier to set up, stable, fast but not too fast. Perfect ❤
4:36 that's what she said-
New top level meta: do U2 with a single flick
Wonder when Phil will do a head reveal…
3x3 is on a plateau at innovation, give some more love on other events😢
i swear to god pause the video at any moment and you can make a meme out of phils face 😂
Just so you're aware, it's starting to become a standard (at least from what I've seen) that when Chinese companies send a product early, they review the video. Generally it's just to make sure you aren't saying anything bad about the company, and they may ask you to remove certain parts if they feel it may hurt their brand image.
@asmallkitten
2 ай бұрын
I know. Still unfortunate.
@xdfdf_
2 ай бұрын
@@asmallkittenprolly makin sure nothing said against ccp
@davidtsiang-vv4wh
2 ай бұрын
@@xdfdf_ If everything Chinese, including Gan, is owned by the CCP, then The Cubicle is also owned by the CCP. Brainwashed much?
@davidtsiang-vv4wh
2 ай бұрын
@@xdfdf_ If everything Chinese, including Gan, is owned by the CCP, then TheCubicle is also owned by the CCP.
Apple 14 MagSafe pro😂😂😂
The fact that the cubicle already has to knock this down 30% right after it released kind of tells the story. And I buy from The Cubicle because they're as honest as they come. Completely trustworthy. So the case holds the tools in a wonderful package... but you can't get to the adjustments under the caps without a big tool that won't fit in the case...or the caps break. This is so, so stupid. I haven't liked GAN's flagships since the 12 (I like the 12 fine, but the 11 was peak GAN). 13 was garbage. 14 was garbage. They somehow made the 14 WORSE with this new release. Their new Mega has great internals, but the color options are garbage. Forced to use their way-too-light cream color side that's too close to their white, doesn't come with replacement sides or even have the option to buy for customization like Dayan or Yuhu. Their new 5x5 is not bad, but the AoChang M and X-Man Hong perform better for less $. Though it's funny to see GAN have to go back to normal Philips head bolts instead of some proprietary thing that needs a one-time-use tool that'll be lost and then you can't adjust you puzzle ever again. Everyone is excited for their SQ-1 to premier, but I'm not liking the current trend. Their 2x2's are all that's left that make me want to main them in an event. I used to be a GAN fanboy and now I can't stand them.
I just got this cube, and because I use a lighter turning style, I love this cube
gan 14 pro maglev uv ultra v2
Timer app name?
@olliecubez
5 күн бұрын
CubeTime
I feel like jules would hate that cube the most
i dont get whats the issue with them wanting to review the video before publishing, they obviously still let you publish it when you were talking shit about the cube the whole time.
Benjamin plushie when?!!!
Yessss
😮
yoooo nice
@AnaisNeculaSpeedcuber
2 ай бұрын
oh hello
@gericubing
2 ай бұрын
@@AnaisNeculaSpeedcuber wow hello
@AnaisNeculaSpeedcuber
2 ай бұрын
yep that's me
gan reviewing their review to look at what they say is a huge red flag imo
Team cubicle for life
6:15 ll skip
Should´ve given it to Jules and seen his Reaktion !😂
Did it break
Nice
Wo.
as someone who doesn't have a gan 14, but has used a xman v3. I would say the v3 is better mainly because of the price. And tbh the 14 is probably expensive because of the 1000+ combinations that people would just get confused by
So "Pro" means uncontrollably fast, less stable and you need a tool to remove the center caps. Guess I'm not the specific type of person to use this.
Heeeeey Venezuela!!!!👺😡
Phil be like "the gan 14 pro is sooo fast but I'm not" Also you could try putting the gan 14 pro edges in the gan 14
I just bought my gan 14. What am i supposed to do :(
@joemoe1560
Ай бұрын
You will just have to change ur turning style and use heavy lube to slow it. It's incredibly fast, that just makes it hard to control. It depends what times you are getting rn. Maybe you can send it back if you want?
@o77vh87
25 күн бұрын
turn lighter. If you struggle u should practice turning light with pll and incrementally increasing the speed without putting much more force with your fingers. A trick u could use is to use both hands to do a R or L move, so if u are doing a R', u move your left hand up like ur going to do a L' while doing the R' , this is to spread the force from one hand, more evenly into two hands.
@AbdulrahmanSakran-yl6pp
5 күн бұрын
Thx
@AbdulrahmanSakran-yl6pp
5 күн бұрын
Update,I got used to the cube, and thank you for the tips they really helped me to cope with the cube
I'd rather buy a gan 11 m pro and a tornado v3
Hi
4th
🗿🍷 70 dollars
Gan
Wee
Ak
I need free GAN
First
@Rubixcube80
2 ай бұрын
No😅
Cool! 69 dollars 😂
13 seconds means 3 views lol
Jesus loves us alll
Pin me
Ill know if it a improvement when it says pro just remember apple
you have to get a permission from gan to publish the video ? WOW dictatorship
3 views in 45 seconds? bro really fell off 💀
@TurkishKS
2 ай бұрын
This new comment is a plague, and you're a filthy carrier.
@Jeremie356
2 ай бұрын
That's my views for 3 days😅
@Pseudoslotter
2 ай бұрын
Bot
@JohnDaCuber
2 ай бұрын
Skull
@APersonOnYootoob
2 ай бұрын
Npc ahh comment
Um what the sigma
Who thinks gan is falling off 👇