Black internals is such a clean look, I'm glad GAN is considering bringing it back, hopefully that one does come to market.

@Geniuscuber397

6 ай бұрын

I prefer The Primary ones

@LRGnightmare

5 ай бұрын

​@@Geniuscuber397me too

@ThatOneHarry

4 ай бұрын

@@Geniuscuber397same and it just doesnt look like a maglev flagship without them

@skellq4385

3 ай бұрын

@@ThatOneHarryWith black internals, it honestly just feels less quality and just looks like the gan 356 series

0:26 The most satisfying sounds a speedcube has ever made

@emmanuelmarinliera4738

5 ай бұрын

Totally

the 14 is probably one of the most underrated cube

I recently got the 14 and I have gotten really good times on it! My current settings are 5 for the maglev, 3 for the tension, 3 for the edge magnets, and 2 for the corner magnets. It has the feeling of the 12 but the inside feels a lot more crunchy which I'm honestly a huge fan of. It also has less catching than the 12 and people are complaining about popping when I have never gotten a pop on it in my life. Overall whatever you are more comfortable with.

@Nico127.

5 ай бұрын

Do you recommend gan 14 and better than 12,

Great video and Love how you put your main settings and how you set them up in the description I HOENSTLY WATCHED THIS LIKE 10 times over!❤😂🎉

This man deserves an official sub 5 avg so bad

Glad you could make it home safely Matty! I think you should use the 14, showing everyone that the 14 is worth using, and It could be the difference of you getting a sub 5 average in comp, and not getting it. Hope you achieve results with it :)

Hi Matty! I have a question about the tension settings of GAN cubes since I still find it a bit confusing. Say "tension 4" of your GAN12, does this mean the fourth click away from reset or is it the fourth tension (three clicks)? Thanks!

The f2ls on those 3s were insane.

Nice job🎉

Big reason I personally never upgraded my gan past the 11mp was because of lack of black internals, I really hope that is brought back

hope to see you at san ramon!

Hey there Matty ! Do you think the Gan 12 is still worth buying or it’s better to go for the 14 ?

I see you use the halo timer, but are you also still using cstimer? do you ever just connect the halo timer to cstimer? i do it with the original gan timer and its pretty awesome

I didn't realise it had black internals, did you chose that or does it come like that. Btw wth were those wierd sounds it's making did u like cubeheads home lol

best solutions in the US🔥🔥🔥

hmm i like how you said the black internals are similar to the gan xs (being probably my favorite gan 3x3 i own)

For gan 12 setting for tension 4, do you mean after the loud click do you do 3 more clicks or 4 more clicks?

Fantastic extra ordinary mind-blowing

Great video!! 🤩🤩 Also, does the black interior of the Gan 14 have a UV coating?

@SliceMoveOLL

6 ай бұрын

My question exactly

@7oclock

6 ай бұрын

No

i think gan should release the black internalversion becquse they do make a difference

For the gan 14s lube do you use a lot of gravitas or just a small dab?

Any ETA for the black internals? Can’t find any information on it. Planning to buy one

What comps are you going to in the next couple of weeks

wait does the gan 14 have a option for black internals?

Wait you using smart Bluetooth timer then typing the times in?

i absoutely agree with you I think people eho use the Gan 14 has light turning style

What about your magnet settings?

1:08 what is this 1.2 F2L bro

@GoofyCuber-dj4tg

6 ай бұрын

bruh f2l is only 13 moves wtf

@thecubingjedi808

6 ай бұрын

Lol yes

Do you have the Gan 5x5?

you should do it !

Those solves in the beginning were so incredible..Also what was that f2l on the 3.58? Without the lockups on the jperm that couldve been like a fullstep 3.2/3.3, looked insane.

@MonneTheMoon

6 ай бұрын

Yeah, the F2L was 13 moves in like 1.1s I think. Edit: It was 14 moves in 1.3s

@thecalculatedcreativecoder1428

6 ай бұрын

@@MonneTheMoon Wth. Thats nuts!

@godzillafirefox923

6 ай бұрын

@@thecalculatedcreativecoder1428 imagine ll or even pll skip on that solve!

@JonasPilhoefer

6 ай бұрын

B' R D R' F R U R U' R' D R U2 R' r U r' R U R' U' r U' r' L' U' L F L' U' L U L F' L2 U L That's the solution he did. There's even a really obvious 10 move F2L solution lol: D F D' B' R D2 U R U R'

@MonneTheMoon

6 ай бұрын

@@JonasPilhoefer Yeah, that's just insane!

Could the differing feels of the black and primary 14's be because of different levels of use? I'm guessing the primary internal cube has more solves on it than the black so it could have a softer feeling because its more worn out?

@ClockSolver

5 ай бұрын

no, theres a huge difference between my friends gan 11(primary internals) and his brother's gan 11(black internals), they feel different, i think primary feels better but thats just preferance

@Usuario01997

5 ай бұрын

@@ClockSolver Primary internals feels a bit drier but faster, but black internals feels soft but less faster for some reason

That 3.58 had like 1.1s F2L. How!?

i feel like the gan 12 is still reliable since it has been out for so long and the setup is easy. the only thing is the small lockups but i don’t know if that is fixed in the 14 since i haven’t tested it.

@tbbzeus007

6 ай бұрын

Bruh who asked you?

@jcuber8907

6 ай бұрын

fair @@tbbzeus007

@garnerthecube

6 ай бұрын

@@tbbzeus007 who asked if anyone asked?

DUDE WHAT KIND OF LUBES DO YOU NEED TO GET THAT SOUND AT 0:58 like my guy thats actually insane 😭

Wait howcome the internals are black?

Does gan 14 black internal have uv coating?

@mikispazz6597

6 ай бұрын

From the video it looks like it is uv coated

Just my opinion (I've never used a gan cube) I feel like since the 14 has so many combinations, your optimal combination is just hidden within the cube.

Keep practicing and one day you may be nearly as fast as Timon or Max. Keep it up, slugger.

can someone help me, I don't know which one should I buy, gan12 or 13

@escubingchannel

6 ай бұрын

13

@NotThatCuber

6 ай бұрын

No buy 12

@NotThatCuber

6 ай бұрын

Many people have said gan 12 is better than 13.Me personally I have no idea but I kinda have a sense of how the 12 feels because I have 14.

@namesless69

6 ай бұрын

@@NotThatCuber tried my friend's gan 12, for me it feels like it just wanna pop out and corner cutting isn't that great, but I love the overalls feelings especially the crunchiness. I'm expecting gan 13 has a better performance than 12 hopefully but many speedcubers said the opposite

I still main the gane 11 mpro

you keep getting sub 5's, if you would just join a competition you would be like one of the best cubers ever

Still can’t figure out why your tensions pop for me

I think you should stick with the gan 12, I feel like you can trust your turning more with it compared to the 14.

What is it mean TPS ?

@brentsmith3376

6 ай бұрын

Turns per second

Black internals instantly make a cube faster (trust)

Hello Je... W?

white internal 🤍

his tps is god,equal to kyle and yiheng

bruh whys ur cube so fast that u can do U4s with a typical U2 strength

Gan 12 looks very locky

1:08 (3.58) is 1.33 F2L lul

@Stewy-

6 ай бұрын

fun f2l-1 solution - y B' R D R' F2 R F' D

@Stewy-

6 ай бұрын

y B' D F D' R D2 U R U R' heh 10 move f2l

@Stewy-

6 ай бұрын

and y2 D L D' R' F D2 y' U R U R' is another 10 move f2l?? woaji

@yinyangsepticruski

6 ай бұрын

Hey stewy! Thanks for all of your reconstructions.

@thecubingjedi808

6 ай бұрын

Haha damn

Gan 14 just gets a lot of unnecessary hate, like people even say it is the worst cube of all time. Sure, it may be overpriced, but that doesn’t change the fact that it is good. People are just salty

If yours isnt popping on those settings then we dont have the same cube lmao theres actually no way

stay with 12

Hopefully you can get those times in competition because I want you to be the new world record holder ❤🤍💙 USA number one