I think some plywood inside your RV wall would remove some of the wall flex you see when plugging in.

@liketheresnotomorrow

5 ай бұрын

Indeed. A project for another day😆

I like the fact that you didn't post this right after you did it and added the one month review at the end. Thats different and it provides more confidence in the product. Great job

@liketheresnotomorrow

4 ай бұрын

Thanks for that feedback. We will keep this in mind as we go forward.

You made that look so easy, my dad was a underground electrician in the mines, he always told me when working with anything electrical make sure your juice(thats what he called the power) is off and you're good to go. Well done my guy.

Thank you for posting this. It is something that I have been wanting to do myself, and you made it look easy!!

@liketheresnotomorrow

5 ай бұрын

I’m telling you, if I can do it… so can you. 😜Feel free to message me if you have any questions.

Love that plug. Makes it so much easier…and safer! New subscriber here.

@liketheresnotomorrow

4 ай бұрын

Welcome and thanks for the sub. Appreciate that.

Good job. Not everyone will have a crap load of tools to do the job. I have a ton of tools I could never take on the road. Wire ez will be one as it's hard to do any wiring without it. Live rubb tape is another but it's not UV stable. If I have room and the weight then a hydraulic wire compression tool is a must as it makes the best connection. I doubt I will ever take the Lazer wire stripper as it cost way to much money. But you did a great job. Thank you. Let us know on a year how it has stood up to time.

@liketheresnotomorrow

4 ай бұрын

Will do. So far so good,

Great product review. I have seen some other YT videos on this situation and resolution. E-Trailer is a super vendor as well. Thanks for sharing some awesome info and take care.

@liketheresnotomorrow

5 ай бұрын

Awesome thank you!

@somedayistodayrv

5 ай бұрын

You are welcome.

Another great video! Thanks for sharing!

@liketheresnotomorrow

5 ай бұрын

Thanks for watching!

You’re the third person who has did an install of the component. Yeah it’s a bit pricey but for the safety feature and simplicity it’s worth the price. I checked it out.

On the standard plug you are supposed to twist it to lock and not rely on the ring to hold it

@liketheresnotomorrow

5 ай бұрын

We didn’t have a twist lock before with the older one. You just had to stick it in and the use the ring to tighten it. It was not a great design. This one is way more solid.

@waltfriedrich7631

5 ай бұрын

That was a twist lock plug

@leeshearer9725

5 ай бұрын

Correct. The 50amp plugs are twist locks

Great video. Thank you.

@liketheresnotomorrow

4 ай бұрын

Glad you liked it! Appreciate you watching.

I would put an aluminum stiffner behind the sheet metal. Also wondering if they have 30amp adapter plug. I often use 30 amp plug in my 50 amp plug in.

Stick the cable through the strain relief before you strip the outer jacket. Makes it way easier. Also when you are stripping the insulation off with a knife like that, be super careful not to cut into the copper strands. that will start a crack in the strands that will break off over time. for lubricating the cable to get it through the strain relief, soap works but is pretty messy. splash a little rubbing alcohol on the jacket. It's just as slippery, and will evaporate without leaving a sticky residue. There are much higher quality receptacles that are the standard connector, but they run sixty bucks or more, and you probably have to special order them from an electrical supplier.

A 90 degree plug would also help a lot.

Nice job and a super clean install. I would put something behind the plug receptacle to stiffen the trailer wall or you will be repairing this again.

@liketheresnotomorrow

5 ай бұрын

Great idea

We have a 36v11 and plan on doing this install. I put one in our last rig and super easy. The hardest part for us is we had aluminum sides so had to figure a way around the ridged sides. I just subscribed so I can see more stuff from you all

@liketheresnotomorrow

4 ай бұрын

You can do it! Let us know how it goes. Thanks for the sub👍

@seanprivitt2700

4 ай бұрын

@@liketheresnotomorrow will do. It'll be easier than the last one I installed and gonna find a way to reinforce the wall since it is so flimsy

You might want to beef up the anchor. The sheet metal isn't stiff enough. The whole assembly should not flex that much. Maybe add a thicker metal backing plate, behind the sheet metal, to stiffen things up.

@ZonaJim

5 ай бұрын

I was going to add the same comment. That is a bad place to mount that connector, no matter the type.

@liketheresnotomorrow

5 ай бұрын

Good idea, thanks!

A 90 degree angle connector would be ideal for the cord, less stress on the cord and connectors

@liketheresnotomorrow

4 ай бұрын

agreed!

I would solder the ends of the wires making them solid and use silicone spray instead of soap and I agree plywood behind to stiffen the panel

@OVCArchion

2 ай бұрын

Never tin wires that are going into a clamped connection. As the solder heats it softens and deforms. It will become loose and generate more heat.

@waltfriedrich7631

2 ай бұрын

@@OVCArchion been doing it that way over 50 years and never had an issue. The only way for the solder to soften is if it was not tightend correctly in the first place

I would go with a product from the eu or the uk the standards are very high and are tested Vigourously

Now if you forget to unplug before you move it will rip the whole metal siding off 🎉

@liketheresnotomorrow

4 ай бұрын

Who forgets to unplug? lol I feel like there's a story in there somewhere. Good reminder though

@robertpenland2429

4 ай бұрын

@@liketheresnotomorrow same people that drop there 5th wheels on there trucks or forget to latch the hitch to the ball . Usually distracted .

@frankgrendys

4 ай бұрын

Cut the music

Is there not plywood sheeting on the backside of that aluminum panel? In all my years of owning campers w the modular screw in power plug I’ve never had an issue or defect w the plug assembly. Oh, I’ve personally owned 27 RV’S and counting. I did see a neighboring rv’er trip over his power plug and crack it as well.

@liketheresnotomorrow

4 ай бұрын

They sure don’t make them like they used to.

I just noticed you have your Starlink cable going through your garage window. Does that work well for you? I’ve got the same mounting bracket you do in this video for the pole but I run my cable under the rv to the right front storage door and keep my router out there. I would prefer having it in my garage where my mobile remote office is set up but haven’t found an easy way to get the cable inside the garage. Any tips would be greatly appreciated.

@liketheresnotomorrow

2 ай бұрын

Yea, it works, although in high heat or extreme cold it’s not ideal because the window is cracked. In a perfect world we would creat a perm cord outlet of some sort, but, well… time. lol For us, it’s just fine this way.

@liketheresnotomorrow

2 ай бұрын

And we have been using the T-Mobile more than the Starlink lately.

Now what a neat idea. My only question is with using soap when put this back together makes me worry. Soap has water in it and that soap is now inside that connector end and wouldn’t that moisture cause corrosion?

@liketheresnotomorrow

5 ай бұрын

We haven’t experienced any issue with it, and it was recommended, but apparently you can use silicone as well.

I say billshit....I've never had that issue. If I did I would replace it with the stock unit and get a 90 degree adapter....problem solved.