So that's how the window broke. I saw you guys camping in the Phoenix area and saw you two walking the campground too. I told my wife I spotted a couple of celebrities. Chad waved at me when he was on his one-wheel. Safe travels guys!

@ChangingLanes

21 күн бұрын

Next time, say hi! 👋🏼 😊

@Hal9000-ro1zj

20 күн бұрын

Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaqaa 0:41 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

@RedneckVR1

19 күн бұрын

@@ChangingLanes Wife told me today she would love to meet yall. I told her someday if we lucky lol

Thank you so much for the video! We had the same window break in our Fuzion 430. We were able to order it and replace it ourselves within 3 weeks! The parts department at the Camping World in Thornburg, Virginia was amazing! But watching your video helped us make the decision to do the work ourselves. 8 Thumbs Up!!!

Dave here and glad that lag screws were installed in all the holes on your rig. IMHO, that supports my previous comment about a special rig getting special attention on the assembly line. I understand that GD says that lag screws are not required in each and every hole, but, if I owned a GD rig, I would want to see the design drawings for my rig stating that as fact. Only then would I consider pushing the "I believe button". I agree with most others that say you are nice people, but I still think that as brand ambassadors, you got better assembly of a showcase rig. Full disclosure, we do not own any RV but we were almost ready to purchase something, before changes in the economy changed our plans, and GD products were high on the list. That was based on many KZread channels, including yours. Safe travels.

IMO the way Grand Design handled the whole frame flex issue was pretty poor, until they were finally forced to do something. They were pointing the finger at Lippert, who designed the frame per GD's specs and requirements, and at their customers, claiming they overloaded their rigs. I'm sure in some cases that is correct, but not in all. We just noticed a crack in the sidewall (near our bedroom closet slideout in the front) of our Dutchmen Voltage Triton 4271. We baby our rig, no off roading, and no overloading, but we do have ~30k mi. on it in the first 3 years, and America's roads aren't exactly perfect. I reached out to our dealer, who said there could be frame and/or sidewall failure, so they had us test the frame flex, per Lippert's document, and we only measured 1/4" movement, which is considered normal. Likely we just have a broken weld in the sidewall near the slideout due to the flex from driving down the road in the nose. I also mentioned to them in passing that we had water damage on our 3 lower slideout floors where the water had wicked through the Darco wrap and into the OSB slide floors, but that I had dried them out, added hardener, slide skis, and rollers. Within a matter of hours, our dealer said they received approval from Keystone not only for the sidewall repair / replacement where the crack is, but also for all 3 slideout floors (which I didn't even ask to be replaced)! I was blown away, given that we only have a few days left on our 3 year warranty, but Keystone and our dealer definitely deserve kudos for standing behind their product and going above and beyond. We are taking our rig to them this weekend to start the repairs (within only a few days of notifying them of this issue). For what it's worth I checked our lag bolts in our sidewalls as well, all were in place, though some had loosened so I tightened those. I'm still not convinced that it's 'normal' to leave lag bolts out, GD is the only mfg I've heard of that does that. If there is a place for them, why would they not be installed, to have better attachment to the sidewalls? How many lag bolts are installed is 100% on the manufacturer, not Lippert.

I’m surprised you don’t have a tankless water heater. That window looks bad. Great job putting the window in.

Come down from the GD Mountain and hear what GD is telling us common folk. I called GD CS with issues. They flat out said no we won’t make an appointment for you. Must be nice to always get to the front of the line.

Heavy duty Mr. Fix it, nice job on both items. Thank again for the invite, happy trails to you and yours.

Another awesome video!! Thanks Chad & Tara!!!

Good thing you had help from members of the Holy Grail

As always, great video :)

You guys are something. I need you as a RV neighbor

Good job

Nice projects. All successful.

Love how you break things down Chad on the water heater. I was always taught to start out by testing power then work your way from their. Thank for confirmation. The window was easier than I thought. Thanks for sharing.

Looks like petty easy fixes. Keep the good stuff coming guys.

You the man

Very good and informative video. Great job!

All good fixes. Proving all anyone has to do is have some aptitude and knowledge and you can fix most anything. You going over the Watts and Ohms laws brought back terrible memories of my taking my A&P test in early 70's. Retired 45 year aircraft mechanic. And as you know most mechanics dont like electrical and most electricians / avionics techs don't like mechanical. Fortunately for me I had to learn both. The most important thing in all of this, you got Tara her hot water and all was Miss Daisy approved. Assuming she approved or you would be limping from the bicious ankle bites. LOL. Always a plus to keep the bosses happy. God bless y'all and stay safe out there on the road.

Great job, Thank You for the content. Hope to see you guys on the road someday.

Sorry you had to go through that , nicely done ,and thanks for step by step process. Safe travels, my friends

Nice video on the window change, you're a handy dude, and a great teacher, I think I could handle a window change following your steps. Thanks for posting this, it's a great help.

Ugh! Even a rig as new as yours still needs repairs. Thanks for sharing the good and bad. Good fixes! Safe travels- Mike and Shelley

You sound like a brand ambassador!

@davidbottles3035

18 күн бұрын

They are.

@timclosson7166

18 күн бұрын

@@davidbottles3035 I know, that's why I said that!

Ohm MG!

In my opinion Grand Design did too little too late, in coming out with their extended warranty. The only reason they did that was the tremendous heat they were getting on social media that they were not able to squash. I have owned three Grand Design campers over the years and the worst one was our 2020 Solitude 310 GK. It was literally falling apart from the center of the bedroom forward. We have since moved on to a different way of traveling the country and camping. My heart goes out to those who have serious issues with their campers from this company that will probably never get rectified correctly by putting a Band-Aid on a major wound.

Glad they did your lags correctly, probably as a result of you working with them on the design of your rig, it being unit 1, etc. The rest of us however have a really big problem and as the miles add up, they get even worse. My 382 was missing lags, they were too small, some were bent from the strain. I also had to replace my suspension similar to what you guys do with the system you put on. Sort of sad that a vehicle made for traveling needs to have aftermarket suspension put on, isn't it? Should I be expected to do this on my car too? Of course not. GD has big problems, I hope they solve them vs. profit and run from all of us owners.

I’m glad all you lag bolts where there because you guys are great people and great ambassadors for Grand Design.

@darrells1806

20 күн бұрын

Not many ambassadors for GD left. Most have defected as of late.

Watching the video while sitting in a tractor plowing a field

Check those lag bolt sizes. Your unit being older now probably has the little 3/8" and can be upgraded to 1/2" dia. Also, when reinstalling the lagbolts, inject an epoxy into the side wall hole then torque the bolts. That should stop them fro. Backing out. You can buy an epoxy that comes with a long mixing nozzle to reach the back of the hole.

No frame issues and attachment with the Riverstone’s. No problems with our Truma on demand water heater. But we are going to have two of our Schwintek slides replaced after two years and 80 or so campgrounds they are wore out. Oh well nothing is perfect.

A project is not complete until there is a flesh wound. 😅 great video!

Yeah! I just had a rock go all the way up into our frameless window on our Solitude $$$ 😪

1:24 - Crimping is a “roadside repair”, like a doughnut spare tire. never rely on that as a permanent solution. When you get home, re-soldered the connection properly. I’m an old-school Harley rider and trust me, that’s what’ll get you by! Been a while since I’ve been able to follow your channel, but good to see you guys are doing great!

@harleyrdr1

20 күн бұрын

9:51 - Let me add to to my comment. “Power” electrical connections are not things like RJ-45 or coax connections. Crimping is pretty much all you got for “signal/data transmission” connections. For power electrical connections soldering is the way to go. So for viewers that don’t know this, don’t be lazy! Crimp your data connections, but learn how to solder your electrical power connections!

@davelauraphillips8814

17 күн бұрын

​@harleyrdr1 Dave here and I am retired nuclear plant worker who was a technician qualified at soldering and crimping. Crimped connections done correctly do not need solder, and in some cases, solder can be detrimental, especially if solder wicks up the wire beneath the insulation and reduces flexibility of the wire strands.

Words that are almost never spoken---This was easier than I thought. Glad it worked out so well.

@ChangingLanes

21 күн бұрын

Very true!

How long did it take to get the window? We enjoy your videos. Thank you!

Re: water heater We recently upgraded to a Truma, worth every penny……. We never run out of hot water, it comes fast and its had minimal impact on our propane usage.

Good video 😊 just saying winnebago owns grand design yes they say there going to fix frame damage it's out of control it's going to take years to fix reputation safe travels 😊

The frame issue I would assume would be fine on your new rig…. But what about your previous rig?

You have the upgraded suspension,you also have an upgraded pin box and fifth wheel? You shouldn't be seeing frame flex beyond spec or welding defects that can lead to damage .If the hot water repair was on your latest RV ,wouldn't you challenge the longevity of accessories that are installed ? It seems to be a case of buying a new RV but be prepared to be a handy repair person , because they are and often rubbish and require constant attention. You put gloss on a problem that has now been exposed and it took them to long to set in place the actions to address it ,and it's proven with other brands that frames can be built by the main manufacturer but do not have the same issues,because the RV specs are greater than other brands .

I'm wondering if it would make sense to loctite every lag bolt since they tend to back out. The engineers must have a reason for not recommending it to the production crew. Maybe?

@ChangingLanes

20 күн бұрын

what @carterstrail said... 👍🏼

I disagree with the lag bolt issue. "Missing" bolts regardless of specification is them cutting corners and being cheap. If it was me and the holes are there and they didn't use them "I WOULD". Bare minimum is not a way to build anything, you should ALWAYS overbuild. RV's should not be susceptible to tofu dreg construction.

Where did you order the window from? We just got done replacing a frameless window after an attempted break-in and just finding someone to sell us the window was quite the task. Of course some of the camping stores were happy to sell it to us but at ridiculously high prices (>$1200), we ended up finding it for $340. (it was just the door window, so no opening or closing. Good job on the video, we always enjoy watching.

Chad those are not lag bolts, they are screws that go into some thin wood inside the steel tubing. There is no way that is going to last. That should be bolted into something threaded like rivet nuts on clip nuts but not some firring strips stuffed in the frame tubing.

Don't understand why Grande Desisugned would drill a hole for a lag screw to hold RV box to frame, and not install a lag screw. Also how would a lag screw back out on it's own?

@ChangingLanes

20 күн бұрын

I think that one chassis might fit more than one floorplan and each floorplan has it's own specs on which holes are appropriate for that plan... This is just a guess. On the backing out, i would guess it's our wonderful highway system beating the crap out of the RV. The roads just keep getting worse.

I am curious We have a problem with the IRV control panel and water heater. WATER AND tRV panel would malfunction when turning on propane. It turns out a harness is needed between IRV panel and water heater.

Great video. Looked like you have the 3/8" Lag Bolts instead of the 1/2" that Grand Design specifies in recent TSB. So when you talked with GD were they good with the 3/8"? Thank you.

@ChangingLanes

20 күн бұрын

I didn't check the size.. just that they were there.

@barrycrosby8483

18 күн бұрын

They mistakenly used 3/8ths lag bolts instead of 1/2 inch. Check out TSB 24-001. Also if your 410 is a single tube main rail TSB says use 3 1/2" Lags. Most had 3/8ths x 3". Too small in diameter and too short to get good grip in wood.

Hey Chad, did the shipping cost more than the window itself. I have a framelees window smaller than that and shipping was 250.00 bucks.

What do you do to keep your peplink router from overheating? I have to keep a fan on mine at all times in the summer as my last one overheated and crapped out on me and right now I just have it hanging from the cable bundle as if I attach it to the wall it overheats as well (don't know why there are no internal fans in this device)

@ChangingLanes

20 күн бұрын

We've not had any heating problems. But, we do have an open tech cabinet and I have the adjacent AC vent pointing that way...

Something is alway broken on tjese things. Just replaced my AC cover today. Unfortunately with the cover off it leaked badly. Lots of water damage to my cieling. 😢 I resealed the AC while I was up there and now 2 of the 4 lags that hold the AC in wont grab anything 🤦🏻‍♂️ lol

@ChangingLanes

20 күн бұрын

That sounds like you might need a new roof.

Did you go back and add lap sealant to the new window?

@ChangingLanes

20 күн бұрын

None needed.

@Itsa_Mea

19 күн бұрын

No lap sealant is used. But what they did on my new '24 was silicone just along the top of every window.

Not showing you peeling the protective film off the new window is nothing short of criminal

@ChangingLanes

21 күн бұрын

😂🤣 OMG, you're right!

Was that a 2-pane insulated glass window?

@ChangingLanes

20 күн бұрын

yes.

What happened at FireFly RV Resort? You said you all would say. in the next video what happened???

@ChangingLanes

21 күн бұрын

That was delayed, so this took the slot.. But, that's coming next week. 👍🏼

❤❤😮😮 C4YT

Did your shower come with the wall panel? Did you install it yourself?

@ChangingLanes

20 күн бұрын

Yes.. came like that... 👍🏼 See: kzread.info/dash/bejne/Zn2jxalyds2Xm7w.html

Do 5th wheels usually come with a map of their lag bolts? How did you know where to locate them?

@chrisneal386

20 күн бұрын

No there is not. They will run along the inside base board of the 5th wheel over hang. Maybe behind trim, carpet (under bed, behind dresser drawers, etc. all depends on the floor plan). I found my GD had 5 holes on each side, but only two lags on each side. So I measured an existing lags, the added a total of six lags to fill the empty holes. I hope that helps.

@stevenjefferys10

20 күн бұрын

@@chrisneal386 did you upgrade the bolts to the 1/2 inch ones vice what I assume were 3/8 inch ones? Plus, it's a good idea to also use a chemical bond, i.e. an epoxy like JB Weld, so as to decrease the odds of the lag bolts working their way out again.

@ChangingLanes

20 күн бұрын

No. You'd need to call support and ask about your model.

@chrisneal386

20 күн бұрын

@@stevenjefferys10 yes, OEM 3/8 lags with sealant. Sealant instead of an adhesive because you may need to remove and reuse hole without ripping the wood apart to remove lag.

@raoulroberts

20 күн бұрын

@@ChangingLanes Thank you!

That blows….Maybe time for some sandbags to hold the starlink down.

@ChangingLanes

21 күн бұрын

We did this instead.. 😊 kzread.info/dash/bejne/gaKEwdyHnpe-gZc.html

For a $9,000,000 Rv that window was pretty easy lol

@ChangingLanes

20 күн бұрын

For $9M, we could buy 60,000 of these RVs and have lots of spares!

@chadkoller7809

20 күн бұрын

@@ChangingLanes 😂😂

Could you have rolled your eyes any further back in your head when talking about frame damage-not flex but breakage. You are OWNED by GD. Sure you and your issues with little things, and bring that out, whoopee! Of course they let you talk about how they came out or how you fixed it. But for the rest of who have broken frames that were "fixed" by GD-like us, GD has done little to help us. No reimbursement for hotel, meals, or fuel. So, roll those eyes Mr. and Mrs. GD. Obviously, you tell the GD line well.

Come on man it's 85% grand design issue just because you collaborated with them you talk like they are the best,Secondly if you do your research they are suppose to have lag bolts in every hole starting this yr which they lie about from what other youtubers say so if you can't be straight with your viewers then nobody can trust your reviews on anything

Seriously? Hubbub? I can send you some families who are dealing with major hubbub. Denial much Chad, wake up to reality about what is really happening. No, GD has not stepped up as their warranty has so many holes in it. I can prove it but if you want to keep burying your head in the sand, I am not going to waste my time. Now your brand is attached to Grand Designs frame failure and you are letting a lot of GD owners down.

@RoadRider95

5 күн бұрын

So true.