Galileo Shuttle with Interior AND Parts Pack - Double Unboxing - Comparisons - Mock Up Build.
Тәжірибелік нұсқаулар және стиль
This is an unboxing video for the 2022 release of the Galileo Shuttlecraft with Interior and the Galileo Parts Pack. If you have the old version, you can buy just the interior, which is being sold as the "Interior Parts Pack"
In 2020 Round2 / Polar Lights released the Galileo Shuttle. After decades model builders finally had an accurate well detailed shuttlecraft model kit.
But it did not have an interior. Now in 2022 we have a new release with a full interior, complete with 7 figures.
PLEASE NOTE THAT YOU HAVE 3 OPTIONS FOR THE GALILEO SHUTTLE
2020 Edition - POL909 - Galileo Shuttle (no interior) - AVAILABLE NOW
www.autoworldstore.com/produc...
2022 Edition - MKA053 - Galileo Shuttle Interior Parts Pack
(For use with POL909) - PREORDER (due out Winter 2022)
www.autoworldstore.com/collec...
2022 Edition - POL995 - Galileo Shuttle with Interior
N.B. comes with 1 roof with cut out transparent plastic section and additional solid roof) - (due out Winter 2022)
www.autoworldstore.com/collec...
Пікірлер: 61
I might suggest sanding the buttons down without sanding them flat. They are too tall and close together for Microsol to cover the distance, but knocking them down should fix that without removing the contour completely. Thanks for the look. I have the shuttle kit waiting for a build and will definitely pick up the interior so I can do a lit build. That's awesome. I think the lack of interior was the main reason I haven't been excited to do this. Love TOS design.
At least they have put paint colours that are not the old Testors that are not easily available anymore. Makes sense to use Tamiya instead.
Great review. I can't believed you missed trying the improved shuttle figures in the bridge kit...
looks great
A++++ to round2 for the clear ceiling!!!
The icing on the cake would have been to have the original Galileo 7 crew inside. A very nice model nonetheless! 🖖🏼
Amazing !😀
Great review , Thank you for sharing. I wasn't going to get this kit but you changed my mind . I might have to block your channel, every time you review something, most of the time I end up getting it! 😁😁 Hope you and your loved ones have a great/safe week! Until the next time, take care !
I’m running out to my hobby shop and ordering this soon. Been waiting for this since they made the shuttle. Thanks for the look inside
Awesome looking Model
Glad this was done, have been waiting for the obvious addition to the new-ish Galileo Shuttlecraft kit.
Can't wait !
Great video and now I want one. The scanner screen in the front center should be clear as it was on the real set/prop. Also if you leave it clear, light the dash make a place for the light to shine through bottom of the screen the plastic around the perimeter of the scanner will light in a ring like the actual set did.
Interior kit should include extra figures so it can be manned by crew from " The Galileo Seven " episode.
Sweet ! I can’t wait to get this now! Thanks for the great video! Love the door! About twenty years ago I built a Rio Grand runabout with my own full scratch built interiors for the cockpit and rear compartment taken off of the STNG episode Timescape with little sleeping compartments and full lighting it came out awesome although after they came out with the circuit board and leds I might open it just to add the new lights or buy another to do it.
Finally, yes! I'll get it but I'd rather have the figures/characters from the episode "Galileo 7", than the regular bridge crew!
@JoeKrol
Жыл бұрын
Agreed. I can’t remember a TOS when Uhura was on a shuttle. There was a Yeoman in red skirt. It would be great if they made a crew from that episode. They could have Scottie crouched over draining a phaser into the open deck plate. Lt Boma carrying one of the tanks out etc. It would be a diorama looking to be built.
Outstanding video and presentation. I'll need to find the interior kit for the shuttle I bought last year. This is why I waited to build mine.
I can see a diorama with a TV camera and flim crew. Nice model!
Must have
Awesome! Where from?
I checked some of the episodes and you are correct, that the black upper center panel should be gray.
Paint guide uses Tamiya Paints. Nice.
You just know they will release a prepainted assembled version now.
@JGG1701
Жыл бұрын
More than likely. I wonder if their pre painted Enterprise was a big seller. 🤔
All the guys are doing some serious man spreading. HAHA Everything really looks great though. You did a great job. I thought it was a nice touch they even added the little access panel on the floor.
I think your console looked awesome. The decals look great all around. Great review!
I wish they'd put these figures in the latest release of the bridge set.
it's too bad that the figures are bigger as the bridge set ones. i have the old bridge and round2 does not sell me the figures without buying an new bridge 😅
@Pygar2
Жыл бұрын
Bridge, 1/35 and shuttle 1/32, I guess?
@Mister-Tentakel
Жыл бұрын
@@Pygar2 No, both models are 1/32
I've read that the separate interior kit is a limited thing and after a certain time you'll only be able to get it with the shuttle.
I know Boyd and TrekWorks and probably a number of other guys did Galileo kits with interiors. I think Boyd built up a resin garage kit with interiors but no figures of the crew. What makes me chuckle about the "interior parts" of this new release is the fact it features ALL the senior bridge crew! LOL Talk about a disaster waiting to happen! You'd lose the commanding officer, first officer/lead science officer, chief engineer, chief medical officer, senior comms, senior navigator, AND senior helmsman in one blow! LOL
@danharris5999
Жыл бұрын
Which would leave Lt. O'Reilly in command of the Enterprise?
@AvengerII
Жыл бұрын
@@danharris5999 I wouldn't leave booze-boy in charge of the botanical garden of the Enterprise! Well, at least he isn't Wesley Crusher!
I think they should have shown Scotty on the box corner instead of Kirk. Kirk already is on the corner of the enterprise box.
How much space is there between the interior wall and the hull please? I was thinking of running fibres to the panels. I have an unmade "empty" shuttle on the interior on pre order with CTVM
Did you use the Voodoo FX lighting kit, and how does it marry to the interior parts kit?
Why are the figures bigger than the ones from the bridge kit ? they are both in the same scale.
where can i buy this kit?
what about putting the decals on the back, just cutting them off of sheet and white glue?
Does it have transparent front and door windows?
can you get rid of Kirk? if you want to a the Galileo 7 version?
A disturbing Titanic parallel with the shuttle craft- Constitution Class Starship 4 shuttles. Capacity 7. Constitution crew- 28 officers, 402 enlisted. Hmmm, who do you think is leaving in a emergency?
I'm just wondering if anyone has a heads up on where to purchase this kit?
Could you post the instructions somewhere?
Where can I get one.
The interior should have been in the first release if anything made good sense.
I thought you're going to bill your Galileo with the interior when are you going to start this
link pz your not working
The TARDIS could take lessons from the economy of space on this ship.
Hey where is the toilet 🚽 🚽 ?😄😄😄
@Pygar2
Жыл бұрын
Through the door, hang a right, can't miss it.
The camera lens needs cleaning. Video is foggy.
ᴘʀᴏᴍᴏsᴍ
Shapeways will undoubtedly advertise Galileo 7 and Space Hippy figures no one can afford; that guy who made a printable top half of the Taurus II creature will undoubtedly NOT do the bottom half...
We say Dee-Cals, Canadians say Deckles.
@tonygreenfield7820
Жыл бұрын
Many - certainly most that I know - in Britain says Deckles as well.
Why would anyone have bought the original without an interior? That would be like a car kit without an interior.
@Pygar2
Жыл бұрын
Simple- they didn't mention there'd ever be one!
Sulu and Chekov...