I just changed my USB charging port without a hitch! Your video is so clear, concise and useful. Can't thank you enough!!!

Thank you so much, your video enabled me to switch my motherboard from my smashed i9250 to a doner phone with relative ease, so I kept all my data/photos. Your calm step by step instructions where 1st class. Thanks again

Thanks for letting this stay up, you helped me fix my old phone from 2013! What a time capsule :)

Just replaced my screen in my Galaxy Nexus and with much help from this guide it went pretty easily. Only difference from the guide was the screen and the lcd came apart separately (because the lcd was cracked underneath) - the lcd requiring heat/persuasion to come off. MANY thanks

LIFESAVER!!! Absolutely saved my butt. Spent $15 on The USB part and a complete success!!!

Excellent and easy to follow instructions. I had no difficulties in replacing the USB charger port. THANK YOU!!!

Thanks so much for this! Just replaced the USB component with zero experience in electronics. Accidentally ripped off the volume switch, but that was kinda broken before anyway. My phone wasn't charging, but with the new part is fine. Saved me buying a new phone, so you have my gratitude.

One small point: there are, in fact, 7 screws. There is one holding the housing with the microphone gasket. I used this video to replace my charging port. It now works great!!

Awesome man you solved me most of the problem...I was trying to repair my galaxy nexus i9250 but i don't to pay much high price ...your video will help to to solve it.Thankyou so much.

thanks a lot! I fixed my phone's usb port with a replacement port, using this video as a guide

Thanks for the help. I would just like to add that there is an additional screw that needs to be removed before that housing (over the usb) can be removed.

excellent video extremely helpful, thank you for taking the time to do this. To note there is that seventh screw on the piece that sits on top of the USB board. Also, I didn't loosen my volume controller proper and it actually ripped off the 3 solder point. People just ensure its completely dislodged and careful with that.

Excellent Video. I was able to replace the USB port and the phone is now charging again and working well.

best tutorials for phone repair, hands down!

Very very detailed tutorial (lesson) i am trully thankfull it helped me not to screw up but in general i think you are a very precise person which for shure is a quallity not everyone has best regards from serbia

Awesome vid dude... replaced the micro USB and saved my phone

Sir, A great tutorial. I changed my power charger. and its working perfectly. 1000 thanks.

Nice guide, helped me to solve my rear camera problem in an easy a quick way :)

Thank You very much for this video. I've just repared my broken screen.

Excellent tutorial! Clear and direct to the point!

Nice man i like the way you do it you not leaving any details behind like others do

Very useful video, used it as a step by step guideline to replace my screen with digitizer. The screen was cracked and I did not use heat gun, so it was a lot more difficult as you noted, but piece by piece it came down. Thank you very much!

@valentintomov5797

10 жыл бұрын

Да не би да ти предстои тази процедура...?

@KamenKoutsarov

10 жыл бұрын

Минахме я вече :)

Thank you so very much, so much detail and great comment ion. The net is such a wonderful place, thanks again.

Thanks this was a great tutorial and helped me replace my USB connector board successfully!

Thanks alot LE55ONS. Ive saved alotof money thanks to you. Just replaced my USB Connector. THAAAANKS !!!!!

I hope I will live to see the day you will tackle an HTC One. If anyone can disassemble one of those, I'd imagine it'd be you. You have this stuff down to a science.

Thank you so much!! Used this to replace the board with the Notification LED

Great video. I just wanted to note that my i9250 had a tiny difference, the volume rocker button had a small loop on the bottom that fit into a peg on the housing. It would dangle inward a little hanging off of that peg.

Thanks a lot for the video...i just replaced the connector cable...hopefully it will work without any problem

Great Tutorial! Helped me much to change screen by myself! Thanks a lot!

Great video and thanks a lot for it. Friend of mine is trying to fix and clean my Nexus using your tutorial. Tnx a lot m8. Cheers :-)

Thank you very much for this useful video which is made with great quality!

Thank you for the video. I used it to replace the USB board. (FYI: it wasn't charging properly, also docking didn't work the way it should.)

Excellent video! Thanks for making it available!

really helpful, thanks for these excellent explanations and super quality macro camera shot (no shaking like hell ;-) really n1ce, thanks =)

Thank you so much... with your video as a guide i fixed the new digitizer for my Galaxy Nexus mobile :)

@user-fr9jo2nb9w

3 жыл бұрын

Thank you

As always, a great phone tutorial!

Thank you very much for the video. Just what i needed. Phone now works Great as we has a corroded charge port fry things up a little bit.

Thanks a lot, your video save me 70 €! Thank you so much!!! for this great video!!!

Excellent video, thanks for posting!

Thank you man, your video is so completely!!!

Thank you man, you saved my gnex.

Thanks Man!!! Thanks a lot!!! It was really helpfull for me...

Awesome video! Very nice voice! thank you

Great Video and camera View...awesom Can u help in advising how to unlock the keypattern.. nothing seems to be working Also my volume keys have got disconnected from the main board..any advice on that

Before you can remove the speaker assembly there is a 7th screw holding it in, that is not shown in the video, you can see the screw is missing on this particular phone @ 2:25 Also in my i9250 all the screws are same length

Well this is surprisingly modular than what I have seen on an ifixit page for a teardown where it was soldered together where it had to be pulled apart like a musical instrument but what docking station is the three point connector meant to interact to?

Nice video. Very detailed. My phone started to work only with external power, but now does not work at all. The battery is fine. Any idea about what it could be? I noted that the upper left part was hot (viewed from the back of the phone). In the video I could see that there is an internal battery. May it cause this type of problem?

Hi, thanks for the video.... you mention in the video if the proximity sensor rubber gasket is missing the screen will go blank, that is exactly my situation. any advice on how can I get this rubber gasket. This is the second time I manage to repair my phone just by looking at you video...... great job

is it possible to install LCD on i9250 from sph-l700 or SCH-I515?

Is there any way to replace the SIM card reader? I broke one of the pins when I removed my SIM card and it won't recognize any card anymore... Many thanks!

Hi. I have a problem replacing the mainboard I cut something (min 4:10). How it call? How it work? And May I replace it? Thank you very much.

WHAT are the unsolded connectors above the sim-card reader?

You really helped me to change my USB port but another problem occurred... There's no sound coming from the back speaker, just some tap once instead of a sound. I have a vibration I can talk there's a sound with my headphones and everything works just there's no sound... Can you please help me? I've done everything I was supposed to do and everything seems to be connected just like in the video. Is it from the new USB port?

Hi LE55ONS, i need your help, a have this cell phone, but my Wireless dosen't work any more, when it works seconds after stop. If you can help me to buy or what to buy for replacement. i saw your film, and you said wi fi, gps and bluethoo exist in the devise back.

Hi. I managed to change the LCD and glass with a replacement I bought. But the screen does turn on, although the phone vibrates to let me know it's on. And now it just cycles between on and off, with the screen not working. A few things I think might be wrong: 1. Power button is deffective now 2. The proximity sensor is broken and keep the phone screen off. Is this possible? Or just for calls? 3. the screen I got is defective. Any help?

My phone fell while connected and charging and ever since then it stopped charging while connected to a charger. However, I can still access the media through the USB but it simply wont charge. the USB port was replaced but that didnt help. To charge the battery I have to take out the battery and charge externally but thats a hassle! Any Idea what else could be wrong?

Just replaced my usb, thanks a bunch!

Great video, I have a strange problem on mine. Once i was wet under rain, the phone got some water too...but worked fine since i turned off, then started to not switch on or even charge, i used an hair dryer to dry it and charged and worked again, (if it charges when it's off will turn on too..if not doesn't turn on) now since then...if i never turn it off is ok, when i turn it off it won't start or charge until i heat it! what you suggest me to do? it could be some bad contact? thank you very much if you can suggest me something i will appreciate and sorry for my english

Great video!! Thanks.

Does the color of the waterdamage indicator in the video indicate it's waterdamaged (as said in the video) or is the indicator not waterdamaged in the video.

hi first of all i really enjoy your videos, and i have a problem with the nexus i9250 you see in my country spare parts are quite hard to get by and i could only find the digitizer the lcd screen is ok but the digitizer is all smashed, it still works fine but as a precaution i would like to change it, is there any way to just change the digitizer and preserve the lcd screen? thanks

Excellent Video! Tkx.

great vid, mate. cheers.

Fixed my phone, thx!

Thank you! Very helpfull.

I want to thank u for this video...... I have problems in my nexus i9250.le his works not as the microphone and when I plug my headphones I hear nothing. can u help me :)

please tell me the jumper for power button. i loss the power button Socket :(

thats awesome!! u are really great bro. if you can please make this on Lumia 1520

@LE55ONS

10 жыл бұрын

I hope to cover that one day..

Sir I need that touch screen..where I can find

thanks alot! Very helpful

good afternoon friend I have a problem with my Samsung Nexus i9250, when I pressed the power button, the screen turns on but immediately turns off, does not give an illumination as such, turns and presses and has the same thing there does not happen. As I prepend the telefo launches me google and then it turns off, but the phone is still on, the service is rendered so that it can be seen in a dark place, only at the time of selecting the button, what can I do?

Thank you so much!

How could the vibrating motor be replaced.

Good job., thank u

Thanks a lot Sir...

The screws on mine appear to all be the same size.

Hi, great video, is it possible to access the storage memory alone if the Galaxy Nexus i9250 phone is not turning on, my Galaxy Nexus i9250 phone stopped working a few days ago, it seems like the power from my charger or the battery is not getting to the phone, when i plug in the charger the phone gets hot. Not sure what to do all i care about is the storage data in the phone. Any suggestions are appreciated!

@LE55ONS

10 жыл бұрын

The only way to retrieve the data is repair the phone or use a data recovery service which would cost several hundred dollars. First I would try fitting a new usb board (5:53) but as you say its getting hot it might need a new power ic. Google around until you find someone who can fit it www.parts4repair.com/samsung-galaxy-nexus-i9250-power-ic-twl6040a2/

I'm trying to replace the USB plug on a Galaxy Nexus i9250. I can't get the board off of the back case. It's pinned down just below the power switch. It won't give way. What am I doing wrong?

@LE55ONS

10 жыл бұрын

keep trying it will pop open

Is there any site where i can buy the replacements? i only need the charge port. Mine wont work unless its an external battery charger.

@LE55ONS

10 жыл бұрын

yes they are about $8, I've put a link and discount code in the description(About)

Hello I recently dropped my samsung galaxy nexus i9250 in water. It works well, but only the lower part of my screen does not work, I see everything on my screen except that the quality of the image is dark green and I have to increase the brightness to see and rotate the screen in order to access the bottom of my screen and since I can not take pictures because the application does not want to open .... so my question is: are what I need to change my touch screen in full or no?. Thank you for the information natacha

@LE55ONS

10 жыл бұрын

its a tricky one to answer as the water can do many things to a phone. It might be worth trying a new camera and screen but there's no guarantee it will cure the problems

Thank you

Did anyone else replace the usb board and then have problems with the loudspeaker not working? A bad connector on the usb board perhaps?

do you have a good link where i can get a cheap replacement for the screen and tactile pad? like cheap but original china stuff

@LE55ONS

10 жыл бұрын

There's a link in the description (About) not cheap but good quality

@BL00DSETTAKINOVA

10 жыл бұрын

***** how can the quality not be good? I'm looking for an original screen but from a cheap chineese price...

hello LE55ONS congratulations for your work, you're very good. I have a question, I have broken lcd and glass galaxy nexus. I have to turn it on to make a backup of data. I tried to connect lcd galaxy s2, but the flat is bigger. could you help me? Is there any model that has the same flat? galaxy or galaxy s3 s4. thanks for your help, and sorry for my english

@LE55ONS

10 жыл бұрын

I don't think any other screens are compatable, you'll need to borrow another 9250 or buy a new screen, copy your data and sell it on ..

Could you do a ZTE Blade 3 teardown, my sister broke her LCD screen, not the touch digitizer. I can replace it, just don't want to make any mistakes. If you can't/don't want to get one I might send it to you.

@LE55ONS

10 жыл бұрын

I've added it to my 'to do' list but I have so many other projects to finish first it might be a long wait...

The 4 the info really helpful.. Also I checked that website but they did not have the Sim card piece do u know where I can get one?

@LE55ONS

10 жыл бұрын

Here's one, but it will need a 'hot air' soldering iron to remove and replace it, a local tv repair shop should have the tools and skills to do it www.aliexpress.com/item/Free-Shipping-SIM-Card-Holder-Tray-for-Samsung-Galaxy-Nexus-i9250-Sim-Card-Reader/1307756672.html

@chrislenander4072

10 жыл бұрын

Thx

Sir this is great. Is giving a hope to my soaked little friend. One thing. I is it possible to replace just the broken glass and no digitizer? I just bought one off ebay for few $$

@LE55ONS

10 жыл бұрын

yes it is possible, here's parts 1,2 and 3 showing how it can be done Samsung nexus glass repair i9250 part 1 Samsung nexus glass repair i9250 part 2 Samsung Nexus glass replacement follow up

@jeTROGIBBS

10 жыл бұрын

Thanks to you I have restarted my salt water soaked phone! now ill replace the glass!

Can anyone advise what the possible issue is for an unresponsive Galaxy Nexus. My phone was on charge, working fine in the morning when I checked my email, then later that day with no other use in between I went to check my email again and found the phone was dead. It won't re-boot and it does nothing when putting back on charge (no charge graphic) and is not recognised by my computer when connected via USB. Have swapped batteries with my wife's (same phone) but no luck.

@keemez

9 жыл бұрын

I have exactly the same issue. I have no idea what to do with it. If you find anything out, lemme know!

@dvorapat

9 жыл бұрын

I've the same problem.. thats why I want to buy an used one with broken display, use my GNex display and replace the display of the one I'll buy... I can't afford to buy a new smartphone.. and GNex withstand just about 2,3 years which is sad, because it cost about $377 that time I bought it...

You forgot to say remove the small screw at the side of the micro usb socket. I was pulling and tugging at the housing that has the headphone socket in it before realising there was a screw holding it. Otherwise a great tutorial

Thanks

Hello. I have to replace the screen on my HTC Sensation. There are several 'how to' videos on KZread covering this, but frankly the quality of your videos is so far superior to anything 'out there' I am loath to attempt the job without seeing you demonstrate it. It may be that it just isn't going to happen - the Sensation is pretty old hat by now - but I thought I'd ask to see if you might one day show this? Thanks anyway!

@LE55ONS

10 жыл бұрын

I do have a sensation with a cracked screen and did a few practice runs but never got round to shooting the video. I have a few unfinished projects, once they are done I might do the sensation and more..

I replaced the USB board because the old port was corroded, but the phone still doesn't charge from any source. help? :(

@JavierArellano

8 жыл бұрын

+VectorAero verify the voltage that you carger delivers. If not voltage at all, the charger is broken. You can also measure the voltage in the battery to see if changes after charging for a while.

can you make a video about how to replace also the glass?

@LE55ONS

10 жыл бұрын

I've tried making a 'glass only' video but it didn't go well for me..

@zeldaboch

10 жыл бұрын

ok, thanks anyway

@MaXyMiZer

10 жыл бұрын

***** for me too :)

Hey, I replaced my phone's LCD, but now the phone will not turn on. Do you know why?

@LE55ONS

10 жыл бұрын

it might be a faulty new screen, can you try the old one..

DEAR FRIEND, u forgot to mention the SCREW at 2:20 which has to be removed before lifting the plastic tile from the display. no offense - if u wanna help people fucking up their phones, i think u did a really GREAT JOB! u have to ADD THAT IN THE VIDEO at least as a NOTE!!!!!!!!!!!!!!!! i can already hear the plastic breaking....

Hey there. Will the memory be lost if i ONLY change the screen glass? Like how you want to remove using the heat gun? By the way, how much will it cost by then? Please reply ASAP. Im in deep shit.

@LE55ONS

10 жыл бұрын

It won't lose the memory content, but its best to backup your data just in case there's any problems. The cost depends on where you live, Google for 'nexus 9250 digitizer' and click the shopping link..

I guess if the volume switches go its a new main board?

@LE55ONS

10 жыл бұрын

no they can be replaced, find a new one and ask your local tv repair shop as they should have the tools and skills to replace it

The headphone socket has 1 screw that need to be removed for the socket to pull out.

@LE55ONS

10 жыл бұрын

well spotted! :-)

Make more videos