with the 2 top bolts of the fan shroud loose, you can push the top of it back towards the engine (after first getting the fan released from the sindle) and it'll slide out with so much room (at least on the 1hz version, but this looks like it has the same amount of room)

I used a template that some guy made. It is for Adobe After Effects...he let you have and use the template as long as you like his FB page.. I just added the link to the template in the video description.

A couple things others might find useful. If the nuts are a bit stuck, use a long screwdriver or pry bar between 2 of the other studs to old the fan in place. And on mine, I could not get the fan out between the shroud and the engine. It was much easier to push the fan shroud away from the radiator and get the fan out between the shroud and the radiator.

@jeepingneatus

6 жыл бұрын

recon455 nice tips!

Thanks for doing the video. Doing this mod tonight! A/C works great if I'm going 65 down the road. Sitting in the drive through I'm sweating my balls off. Getting the fan moving a little faster should help. Gotta have good A/C in AZ!

@jeepingneatus

8 жыл бұрын

Try this if the fan doesn't help kzread.info/dash/bejne/ZpmY16eecaSqf5M.html

@jeepingneatus

3 жыл бұрын

Right on!

LOL. The video editing geek in me is far more interested in what you used to create the titles at the the beginning of the video...

Usualy the nylon peg near the to return holes that scrapes and forces the oil bk into the front plate if your is same as mine and I cleaned mine with maff cleaner and to be honest best to replace there not expensive 60 dollors and there not supose to be tight you should be able to grab it in tick over wen first started there only tight for 10 seconds then there barely supose to move till rad reaches your specified temp 180 to 195 f try all so cleaning radiator and ac rad cooling fins

Please allow the article name and how much it needs to be packaged

En español sería también por favor

Hey, I used a lot of 7500 cst silicone oil in my viscous clutch and I think it´s now running all the time but is safe because I don't know if the sensor is working at correct temperatures. I think I lost some cv dispending engine energy with this fan. What do you think? Thanks

@jeepingneatus

8 жыл бұрын

+Raoni Bradacz Borges Hmmmm, I am not sure. I live in a very hot climate so I used a much heavier weight silicone.

Whats the mod? Its just a basic oil change. Resistance without heat is no good. Youre engine will sound like a semi and youll burn more gas.

lets

i need som advice on breaking loose the nuts as stated at 1;50.

@jeepingneatus

7 жыл бұрын

put the wrench on the nut and hit the end with a hammer to break the nut free. If you are just pushing/pulling it will turn the fan hub.

@MrSaber152

7 жыл бұрын

thank you it felt like a simple solution

buenas noches amigo donde puedo comprar el silicon termico para fan clotch

@jeepingneatus

9 жыл бұрын

VICTOR NUNES I went to hobby shop where they sell the silicon for radio control car gear boxes.

@dinaxanibo5643

7 жыл бұрын

VICTOR NUNES n

@dinaxanibo5643

7 жыл бұрын

Neatus Garage Studios

Doesn't heat make that liquid thicker?

@jeepingneatus

5 жыл бұрын

No, thinner. You can see when it is cold it is thick like molasses.

Jeep needs to go in garbage and Landcruiser in garage 👍 Jk I don't have Jeep and never will. But I do have 1993 Landcruiser.

@jeepingneatus

6 жыл бұрын

Edgar Bravo I have had both and like both. Have owned 5 Jeeps and 3 Toyota's. Toyota, so much better quality. Jeeps, so much fun and much lighter. Land Cruiser is the TOP of the heap!

Никто похоже не знает сколько надо заливать! То что на видео не будет работать правильно. В данном случае муфта будет заблокирована всегда (

Still happy with this mod? I'm going to do this in my 1997 FZJ80, reading on MUD I'm seeing guys use 38-60ml of 15k-30k act fluid. Any recommendations?

@jeepingneatus

3 жыл бұрын

I sold my FZJ but yeah, it was still good when I sold it last year.

No no no

@jeepingneatus

4 жыл бұрын

?

@shamrock4life04

3 жыл бұрын

Yesyesyes

@jeepingneatus

3 жыл бұрын

This worked great.