Welcome to our Precise Temperature Control Hot Air Gun, this video will explain in detail how to set up the operator interface of the Soldering Iron.
In this video, you will be shown step-by-step how to properly set up the product air gun to ensure proper operation and optimal performance.
Hands-on demonstrations are used to ensure that you can easily understand and operate the FW-BE01-Blue Engineer correctly.
-Temperature Settings
Press the TEMP "▲" button on the
left side of the adjustment panel to
increase the temperature
Press the TEMP "▼" button to decrease the
temperature to reach the appropriate
working temperature.
-Wind Speed Setting
Press the AIR "▲" button on the
right side of the adjustment panel
to increase the wind speed
Press the AIR "▼" button to decrease the
wind speed to reach the appropriate
working wind speed.
-Memory Working Channel
To set the temperature of "CH1, CH2,
CH3, CH4"
1.Press the "▲" and "▼"
buttons on the adjustment panel.
The key reaches the desired temperature
2.Press and hold the
corresponding "CH1, CH2, CH3,
CH4" channel buttons, you can set the temperature of the corresponding channel
-Conversion from
Fahrenheit to Celsius
Press and hold the "CH1, CH2"
channel buttons at the same time.
After 3 seconds, you can convert
between degrees Celsius and degrees
Celsius.
-Countdown Setting
1.Press and hold the "SET" button,
the value will start to flash after 3
seconds
2.Then press "▲" and "▼"
on the panel to set the required
working time and then press "SET"
to confirm the setting.
-When the work starts, press "SET"
to start the countdown
-When the countdown ends, a beep
will sound.
-Replace the air nozzle
When different air outlet sizes are
required, snap the air nozzle on
the air gun into the bayonet of the
base.
Pull it up and insert the required
size
Stay tuned for the release of this video and you can be the first to receive the latest product tutorials and tips by subscribing to our KZread channel. Thank you for watching and supporting us!
FW-BF01 Blue Fire - Precise Temperature Control Hot Air Gun features
🔹Direct airflow with a rotary nozzle.
🔸Countdown reminder.
🔹Toroidal transformer.
🔸Plug-and-play handle.
🔹Plug-and-play ceramic heating core.
🔸Automatically enters sleep mode when placed on the rear support stand.
#HotAirGun #MotherboardRepair #heatgun