2006 F250 with 2007 Cummins 5.9 here. I used DCS also. I did my conversion in 2012. DCS has come a long way since. They know what there are doing now! Mike Dahlke is extremely knowledgeable! I recommend them!

@TexasBeardAdventures

6 жыл бұрын

Bocephus Yes Mike is awesome, so are several of the other guys over there. I’m glad I didn’t go with Destroked. I’ve never delt with them....I just heard some bad things, who knows maybe it’s changed now!

@jfubele

6 жыл бұрын

I'm sure a lot of those guys are good. I dealt with them a while back when David Bradley owned the joint. They have come a long way since. I had the TCM-2000 controlling the 5R110. That was a disaster! Now I am using the Ford PCM to control the 5R110 which is tops! Mike is the guy there! My truck now is flawless with a million mile motor without emissions. I'm a happy camper.

@TexasBeardAdventures

6 жыл бұрын

Bocephus Yes agreed, I’m a happy camper TOO!! With the new trucks when something goes wrong it’s $1k minimum!

@georgecostanza9387

6 жыл бұрын

do you have any videos of the truck? if i were to ever do a swap it would be with the 5.9 common rail like you did. would love to see it

@kaseymccleary946

5 жыл бұрын

Bocephus can I have your email, I have a few questions about your swap

You guys did a great job. That truck sounds awesome.

@TexasBeardAdventures

6 жыл бұрын

Thanks! It was a lot of work, but worth it in the end.

I plan on doing the same. Just bought a '98 K3500 crew cab dually that will ultimately end up with a Cummins.

@heavychevy4691

5 жыл бұрын

Did my 99 crew cab gets a lot of looks

My goodness what's a difference 3 years makes. Interesting rebuild. And probably the start of your you tube channel. You have certainly grown a lot! God bless ❣️🙏❣️

@TexasBeardAdventures

2 жыл бұрын

Thank you Denise ❤️❤️🤠🤠

Great overview. It's obvious some of the people that reply don't do much work on there trucks themselves. I've done a few conversions and in my humble opinion the Cummins 12 valve is the best way to go hands down.

@TexasBeardAdventures

5 жыл бұрын

Gary Shaffer I totally agree, I love my truck and thoroughly enjoy driving it! Thanks for watching sir!

@timpickens498

5 жыл бұрын

No electronics to worry about on the 12 valve. So nice

@TexasBeardAdventures

5 жыл бұрын

Tim Pickens yes sir! I drove Frankenstein into bass pro shop yesterday to buy a rifle for my son.......I still get excited to drive the truck. It’s not my daily driver so sometimes I have to find a reason to drive it. Thanks for watching!

@timpickens498

5 жыл бұрын

Texas Beard Adventures thanks for the reply friend! Have a merry Christmas

@TexasBeardAdventures

5 жыл бұрын

Tim Pickens your welcome! Merry Christmas and happy New Year

Great job and nice truck! My 17 year old son did the 5.9 swap in his 2006 6.0 in 2 months all by himself, probably could of done a lot quicker but a few parts were on backorder.

@TexasBeardAdventures

3 жыл бұрын

Dang get that boy a diesel shop! That’s awesome that he was able to crank it out like that. Thanks for watching

@chevylife5490

3 жыл бұрын

@@TexasBeardAdventures hey I have a excursion I am swapping to a 12v. Could you please text me and try to give me some advice, im stuck.

@chevylife5490

3 жыл бұрын

@@TexasBeardAdventures 864 680 3946

@dennisreynolds6915

2 жыл бұрын

@@chevylife5490 did you get it

@czrg473

Жыл бұрын

That’s all I needed to know ! I have an 06 f-350 4x4 gunna eventually do the same

I am convinced the F-Series with a 12 valve is the truck God intended.

@TexasBeardAdventures

10 ай бұрын

Agreed

Thank you for that detailed video I appreciate it

@TexasBeardAdventures

5 жыл бұрын

Dingle Berry your welcome I’m glad I can help. I am gonna try and do some other videos on the truck soon.

@kingbenjamins

5 жыл бұрын

@@TexasBeardAdventures 9gov

Sweet ride! Stephen Cox sent me over here. I'm subscribed now!

Bad ass build man. Screw the money, you got a truck with your name all over it now.

@TexasBeardAdventures

5 жыл бұрын

+Edgar Aguilar thanks brother!! I need to put my IG and YT logos on the truck somewhere. Thanks for watch. Hopefully do a FUMMINS vidja next week.

I like your overview of the truck. I put another 05 comments and my other 03. I bet I got 10 grand in my swap. The main problem that I have is with the transmission. I’ve got a built ATS trans so I didn’t want to swap it for an Alison but may in the future. I’m using a PCS controller and it’s a pain to figure out. No one really wants to tell you how to read the shift patterns to fix it.

@TexasBeardAdventures

5 жыл бұрын

brad barnes that’s awesome, thanks for watching! I wish I could shed some light on how to read the shift points but I just have Mike @ DCS change them up for me when needed. I’m gonna make some more vids on my swap soon.....so be on the lookout.

That 12v Cummins is alot greater engine than the junk 6.0 that came out of it

@TexasBeardAdventures

4 жыл бұрын

I totally agree! Thanks for watching

@chevrolet355

4 жыл бұрын

@@TexasBeardAdventures I recently just sold my 01 24v. I'm looking at a first gen 12v.

@chevrolet355

4 жыл бұрын

@@TexasBeardAdventures but there will always be a special place in my heart for Cummins. I am also from Indiana where it was founded lol

@TexasBeardAdventures

4 жыл бұрын

Heck yeah.....me too I will always love Cummins! I’ve never been to Indiana. Maybe one day. If it was up to me I’d buy a bunch of old trucks and stuff Cummins in all of them!😝😂🍺

@chevrolet355

4 жыл бұрын

@@TexasBeardAdventures this is a long story but I was selling stuff off fb to a guy and all of a sudden a older man came up to me at where we met at and told me how he worked at the Cummins plant. He said he tested a Cummins on an engine stand and had it run WOT for 6 hours straight until the pipes were glowing red and they poured like 100 gallons of water on top of it with it running to get it to hydro lock and it just kept on running. They are mint

Awesome truck!!! Awesome motor!!!!

@TexasBeardAdventures

5 жыл бұрын

+Kevin Leese yes sir m...thanks!

I've got a 2006 Fordf250 that I want to do the same thing but I'm putting in a 24v can you give the number to ecs diesel specialist

@imSkimz

4 жыл бұрын

Did you ever figure this out ?

@TexasBeardAdventures

4 жыл бұрын

The telephone number?

Tractor power!!! Hell yeah brother

I think you should consider letting Wheeler Walker JR. run blocker for the snowman in the Fummins.

God bless you, that’s a lot of work

@TexasBeardAdventures

5 жыл бұрын

Frank Morreale ❤️ Thank you very much...... it was a lot of work but it was worth it!!

Did you alter your throttle assembly on the motor? I'm a 5.9 swap in my 2000 excursion as i type and yours looks different than what i have...

@TexasBeardAdventures

5 жыл бұрын

+jeff v no sir I didn’t alter the throttle assembly. That portion of the motor is stock.

do you have any idea the cost of this conversion ?

When you say if you would do it again you’d use ford AC compressor instead of the dodge... will the ford mount on dodge bracket or is that a custom thing you think you’d have to do and will and Allison bolt right up without the adapter plate in the kit

@TexasBeardAdventures

4 жыл бұрын

You would either build or buy a bracket for the Ford AC compressor, they make an adapter and let to fit the Allison as well! I hope that helps. Thanks for watching

So cool My old 6.0 stroke has 260k on it and still chuggin. I have a savings going for this same swap. I just been saving so long my swap is going to be awesome! For whatever reason my old 6.0 wont die...yet.

@TexasBeardAdventures

4 жыл бұрын

Thank you very much! CUMMINS SWAP THE WORLD. I’m probably gonna make some videos on another swap very soon. Let me know if you have questions when you start I’ll try to answer them as best I can. Thanks for watching 🤠

@TexasBeardAdventures

4 жыл бұрын

I’ve also got other videos on the swap that you can watch! ENJOY

I caught this from Steve's channel the two of you talking and this is right up my ally as the last job that was serious work was for my brother a few years ago... I lost him this April R.I.P. little brother. He was a plumber by trade from N. Mexico in the fifties. He lost the engine in his dozer on his homestead in Alaska where I reside as of ten years now. I got hurt bad enough to put me on the permanent list and he accepted that. His Case dozer used the twelve valve cummins and it took a **** on one morning with the power out and about thirty below zero so it wasn't done the next day. I wondered how come he didn't swap motors in his little dozer cause eighty acres of land with only ten.. fifteen cleared wasn't him. I worked on this swap with him doing what I told him and me doing what ever a guy does when he walks on his arms spot to spot. I cleaned parts! He is a lot smaller than me but wicked strong. We pulled the engine out in a day on the dozer and saved the parts we needed for the swap like the pan, the pump (oil) and etc., and we got this done cause we had every know tool from my shop and his bobcat plus etc., and we ate good. I miss those days

@TexasBeardAdventures

4 жыл бұрын

+Morgan Adair love the story sorry you lost your brother that stinks! He’s down in heaven smiling down on you. I appreciate you watching my videos and hope you enjoyed rest of them.

@StephenCoxfixit

4 жыл бұрын

Sorry for your loss Morgan.

Stephen Cox sent me, great channel you got here bud.

Hi that in cab adjustment for the fuel pump and turbo .if I could ask ! Is it worth it thks p.s great build

@TexasBeardAdventures

5 жыл бұрын

+Peter. Hatch yes I love mine....I think they are worth the money! Thanks brother and thanks for watching.🤠

How is it holding up. Thinking about doing the same. Need to find a cheap 250 and some one to do it, i have the cummins. Want a 4 door leaf spring front end truck.

@TexasBeardAdventures

4 жыл бұрын

It’s holding up really good! I just replaced the factory tappet cover because it was leaking like a stuck PIG 🐷........here’s the video of that issue m.kzread.info/dash/bejne/iGd4z5aOabiYdpM.html hope you enjoy it! 🤠🤠

thanks

Hi i have a 2000 F450 and doing a 12 valve needed help on how to wire the Fuel Shut off Switch Thanks.

@TexasBeardAdventures

3 жыл бұрын

When I get back to the house I’ll see what I can do for you.

@ricardorodriguez-se7tp

3 жыл бұрын

THANK YOU

Hey. I’m curious what you did with your throttle pedal and cable issue and if you have your cruise working.

@TexasBeardAdventures

4 жыл бұрын

I’ll have to go back to my paperwork on the pedal to find out exactly what I did but on the cruise control I used a servo off a Ford Expedition from a junk yard. This would be a great video idea for me! Thanks for watching 🤠

Nice conversion! And a sweet shoutout to your wife:)

@TexasBeardAdventures

Жыл бұрын

Thanks John!

would love to convert my RV from the 300ISB to a full electric something.... what you have done here is impressive though... very nice.

@TexasBeardAdventures

5 жыл бұрын

TRY to HELP you thank you very much...it was a LOVE......HATE relationship for a WHILE. Thanks for watching.

What an intro 🔥

@TexasBeardAdventures

4 жыл бұрын

+Jack Connolly much appreciated!! I try to make all my intros entertaining!

Here from Andy Rawl's channel. Looking good!

@TexasBeardAdventures

4 жыл бұрын

Thank you very much! Welcome 🙏

Doug should start a swap shop

Did the 12v motor bolt right up to the Ford bell housing?

@TexasBeardAdventures

4 жыл бұрын

You have to buy everything build an adapter plate. I hope that helps. Let me know if you have anymore questions. Thanks for watching

How did you get your gauges working like that? Thinking of doing a similar thing to s gas 2010

@TexasBeardAdventures

6 жыл бұрын

FBI so I used DCS for my conversion parts. One of the main things was the tachometer sensor it was very important to install it correctly with the correct spacing so it would read correctly. I believe the speedometer is either from the tranny or a wheel sensor. The wiring under the hood was redone by DCS also. I hope that answers some of your questions. Since I used the 12 valve everything is manual. If I were you I would contact Diesel Conversion Specialist for more information...they are definitely the experts!

@fbi6540

6 жыл бұрын

Texas beard adventures gotcha man. Thanks! I love the 2008-10 f450 a ton but I don’t wanna be in a gasser and a 6.4 is good until it goes out then I’ll do the conversion. How much for pricing assuming I found myself a 12v already

@TexasBeardAdventures

6 жыл бұрын

FBI the cost of the swap depends on how much stuff you want to buy from a conversion company like DCS or Destroked, you could spend 5k-10k on parts from them depending on what setup you want as far as tranny and motor. If you have the time and knowledge to figure it out on your own then you buy only the essentials like adapter plate and build or buy the rest from the auto Parts’s store. I chose to buy my items from DCS because I didn’t have the time to figure it out on my own. Me and my buddy Doug could have with no problem but it was just easier to buy it.

Got a little sassy there at the end of it. Cool project man. You say the gauges all worked, that’s interesting, do they provide wiring harness adapters or something?

@TexasBeardAdventures

5 жыл бұрын

+Eric Styer So what you do is send them your factory harness and they chop off everything you don’t need then put all the correct plugs to match what motor your using and send it back ready to plug and play. Thanks for watching!

Old Wayne has one we call it the cackler .. deer horn handle on the kill cable been ten years now

@TexasBeardAdventures

4 жыл бұрын

+Doug Atkins no kidding.....sounds like my kind of group!! I’ve got a deer antler on my gear shifter on my Suzuki sidekick. Lol thanks for watching

Good job on the swap..heard of you from Steven Cox..hope to see some good footage..

@TexasBeardAdventures

4 жыл бұрын

+Joe Mata thank you....I try to put entertaining and informative content...thanks for watching.

@StephenCoxfixit

4 жыл бұрын

Thanks Joe!

Having the 5.9 in my 93 W-20, I understand why you went this route.I was lucky enough to get it with the Getrag! Had the getrag rebuilt last winter and no problems! Enjoy your truck!

@TexasBeardAdventures

6 жыл бұрын

Hocus Smokus Awesome, I do enjoy it every time I get to drive it. Have you done a video on your 1993?

@hocussmokuskitchengrill113

6 жыл бұрын

There is one vid that its in,in my modest little channel of the same name,if only for maybe 15 seconds. Check it out if you like! "playin in the snow"

This thing is sick as hell.

@TexasBeardAdventures

4 жыл бұрын

Thanks brother 🤠🤠 More to come

thanks for the info, subbed too

@TexasBeardAdventures

5 жыл бұрын

+William Brown thanks brother!!

whats your hand calculated MPG?

@TexasBeardAdventures

4 жыл бұрын

Andrew Kesler 18mpg

8:47 Music to my ears.

Cannot go wrong with 12 valve 5.9L, Bro!

Just wondering why you did not go with a cuatro by cuatro. Don’t get me wrong it looks bad ass. I would need a four times four fo sho.

@TexasBeardAdventures

5 жыл бұрын

Simon Guerrero IT IS 4x4......EVEN MY WIFES CAR IS 4WD!!!!!!

I think if I remember right. Ford used the cummins engine in there f450 and up trucks.

@TexasBeardAdventures

4 жыл бұрын

I believe that’s correct, another guy told me they used them down in Brazil in the f250 and f350!

Is your conversion still doing good? Transmission?

@TexasBeardAdventures

6 жыл бұрын

Bocephus so far so good. My AC was acting up the other day, my buddy doug filled it with Freon and it’s blowing ice cold again.

Same-Same but different!

Stephen Cox sent me over, Nice swap!

@TexasBeardAdventures

4 жыл бұрын

+Lucky4wd4840 thanks partner!

Did you try to get the trans to shift right before you did the dcs programming ?

@TexasBeardAdventures

3 жыл бұрын

No.....i had to do governor springs and a fuel plate to get the transmission to respond.

@jmzct1254

3 жыл бұрын

Thanks for the reply.

@TexasBeardAdventures

3 жыл бұрын

Anytime brother

Nice job

@TexasBeardAdventures

5 жыл бұрын

+mike T thanks MIKE!

Your truck, your build. Came out very nice. People also forget that Ford used the Cummins 4bt in F-250'suntil 2011 with the ZF5. Was called the Max Force so anything you need for brackets or getting your dash to work etc. can come from South America. Not badly priced either plus DCS is very HELP too.

@TexasBeardAdventures

4 жыл бұрын

Really....I didn’t know that. So down in South America ford use the 4bt in the f250’s? Thanks for the kind words and thanks for watching!!!!

@Terk131

4 жыл бұрын

@@TexasBeardAdventures Yes, up to 2011, they used the Cummins 4bt which is exactly like a 6bt with 2 cylinders chopped off so ac brackets, alternator, ps brackets are all designed to be in the Superduty and you can get everything on the dash to work as well wich is nice and if the check engine light comes in, it's legit. Check them out on here, Brazil Ford F250 3.9 Max Power and you van see how Ford designed the fit and it sits way back in the firewall too. Down there putting in a 6bt is an easy and common swap in the rural areas because of "European Emissions" which is why they used the 4bt instead of the 6bt. In Australia they used the 7.3 up to 2011 and NEVER had a 6.0 option,, that tells you somthing. For guys wanting the newer interior they can get a 7.3 cluster cheap for the newer dash designs instead of using the stock one from earlier modles and it's all in tune with the 7.3 (same with Brazil's 4bt, everything is set up for the Cummins) this way you can have your gauges all work.

@TexasBeardAdventures

4 жыл бұрын

Wow, very interesting stuff! I wonder how expensive those trucks are to buy now? Could a person buy one and ship it to the states?

@Terk131

4 жыл бұрын

@@TexasBeardAdventures I'm looking into it now and keep you posted, they have regular cab short bed F250's as well and they are very popular. They also get an inline 6 cyl diesel Silverado's too. Think the GM is a Perkins but not sure but they are big like a Cummins 6bt or streched CAT C.4 with 2 extra cylinders. They have tons of neat stuff but I will keep you posted. Weird to, the MAX POWER Cummins 4bt are left hand drive like ours but the GM is right hand drive. Most vehicles are right hand drive in Brazil.

@TexasBeardAdventures

4 жыл бұрын

Really neat stuff! Let me know what you find out!

I recently just finished a 12v swap into a f350 aswell. Im glad i had the 4r100 bcuz i was able to just buy a shift controller and manage the shift points myself. Just seems like a hassle to have to call someone and explain your situation and have them make a tune they “think” will work for you haha sweet truck man!!

@TexasBeardAdventures

6 жыл бұрын

YamaMerJohnson Badass! The more the Merrier. It is a hassle but for the most part it is done. I’ve got a train horn and air compressor to install sometime soon. That’s gonna be ALOT OF FUN!! I’m glad you enjoyed the video and thanks for watching. Who did you buy your conversation parts from? What year is your truck?

@yamamerjohnson3115

6 жыл бұрын

Texas beard adventures that train horn is going to be sick!! Definitely earned my sub! I went with dcs, the only thing i bought from them is the adaptor plate and flywheel. All the other parts i either scavenged from a parts motor or bought from amazon haha. My truck is a 01 f350 4x4 long bed srw. I tried staying away from conversion companies bcuz thats how the swap becomes really expensive. I currently have $9500 in my complete swap. Thats including how much i paid for the truck, new wheels and tires, everything!!

@TexasBeardAdventures

6 жыл бұрын

YamaMerJohnson Damn that’s AWESOME! On my next swap that’s what I’ll be doing also. Your correct, I’ve got a lot more than $9,500 in mine. Thanks for the sub!

Would you sell your mustang?

Just curious, did you remove the cab or pull it out of the front?

@TexasBeardAdventures

2 жыл бұрын

Out of the front of the truck. I oh can remove the front clip and the motor should come right out. Good luck. Thanks for watching! 🤠

@TexasBeardAdventures

2 жыл бұрын

*YOU CAN*

The perfect engine for a Ford Super Duty :)

@TexasBeardAdventures

2 жыл бұрын

Totally agree! Thanks for watching 🤠🍻

Nice

@TexasBeardAdventures

6 жыл бұрын

DmaxTraveler06 thank you .....I love driving it!!

Nice stang

@TexasBeardAdventures

6 жыл бұрын

407ForRent thanks I’m gonna do a video on it soon.

6 speed eton fuller would be your best bet if and when your current trans spits out the part numbers

@ProlificInvention

4 жыл бұрын

Spits out the part #s ---too funny, stealing that

@TexasBeardAdventures

4 жыл бұрын

+John Bromby1996 LOL I’ll definitely remember that for the future. Thanks for watching!

@StephenCoxfixit

4 жыл бұрын

Eaton Fullers are good but they weigh 900lbs. I think a G56 would be a better/easier option.

that trans is better than the allison.. If my 6.0 ever goes out I plan on doing this. :)

@TexasBeardAdventures

5 жыл бұрын

+GIJo sweet do it!! I love my truck. Good luck and thanks for watching.

did you use the same transmission

@TexasBeardAdventures

4 жыл бұрын

Sergio Hernandez I sure did. 5r110 is the tranny. Supposed to be good up to 1,000 horses!

Same same but different LOLZ

@TyrannicalReigner

5 жыл бұрын

Intolerant American someone’s spent some time in Thailand

Bad ass.

Hay weyy la pinche Galaxya

@TexasBeardAdventures

6 жыл бұрын

Jorge Ortega 👍🏿👍🏿

Id like to put a Cummins in my Space Shuttle, any ideal on cost? Thanks NASA

@chrislindsey3523

5 жыл бұрын

Be better off with a 6.7 powerstroke more power more reliable

@chrislindsey3523

4 жыл бұрын

@Chris Farley yes 235k miles on mine no problems been deleted for 135k miles

@TexasBeardAdventures

4 жыл бұрын

It would probably take 3 Cummins in line but I think it will do the job!

@TexasBeardAdventures

4 жыл бұрын

Powerstroke are good but Cummins are better! In my opinion.

@TexasBeardAdventures

4 жыл бұрын

My next build is a 4bt hopefully

I bought a 92 Dodge Cummins one ton dually extended cab 92 straight 6 Cummins 12 valve with a manual transmission in it for 5500.. the motor and transmission was worth that I got the truck for free

@TexasBeardAdventures

4 жыл бұрын

That’s awesome! I had a chance to buy the same truck but not a dually and regret it everyday! I love the old dodges🤠

@christopherverdeyen1390

4 жыл бұрын

Can you please help me?

@TexasBeardAdventures

4 жыл бұрын

Christopher Verdeyen I can try

Ive got a 12valve sitting in my shop I'm going through. No truck to put it in. Pretty much decided on an F350. Just dont know what year yet. Trying to find out which year is easier.

@TexasBeardAdventures

3 жыл бұрын

The 04 wasn’t bad at all! Good LUCK

Allison tranys dont hold up to more hp. They tend to slip. The 5r110 will hold hold more power.

@TheDarkToes

5 жыл бұрын

Which allison? They make quite a few....

What Liter displacement is this cummins in comparison to the original

@TexasBeardAdventures

5 жыл бұрын

+Curtis Barker my 12 valve is a 5.9 liter....thanks for watching!

@curtisbarker9272

5 жыл бұрын

@@TexasBeardAdventures i am looking around on the net and finding this displacement only has 175hp likely with much more torque behind those horses though. I think i will go after the ATS diesel modded 6.7 liter Cummins with their 6 speed automatic

@TexasBeardAdventures

5 жыл бұрын

+Curtis Barker awesome, the reason for going with the 12 valve 5.9 Cummins because it’s all mechanical instead of all electronic. Good luck I’m sure it will be a sweet rig either way.

So they literally sent you directions on how to do it? That's pretty cool

@TexasBeardAdventures

2 жыл бұрын

Pretty much……you have to pay for them though.

Did you have to take the cab off?

@TexasBeardAdventures

Жыл бұрын

Nope

I have an obs 7.3 its a 97 with 80k all original. Im thinking of doing a Cummins swap, but im not sure if i should since the truck has low miles

@TexasBeardAdventures

5 жыл бұрын

Mr.PoopyButthole No I wouldn’t do the swap on that truck. The 7.3 is a great Motor and if it’s got low mileage and is in decent shape you can get good money for it. Find a 6.0 liter and do the swap on it. Just my 2 cents.

@WeRide4Snow

5 жыл бұрын

Texas beard adventures the only thing that's wrong with her is some minor interior needs done and, all the chrome is original it still had the metal plating on the bed its lifted 6 inches with 20×12 and 35's . Candy apple red with the white down the sides

@TexasBeardAdventures

5 жыл бұрын

Mr.PoopyButthole sounds Lila a beautiful Truck. Those obs 7.3 are like gold theses days. Keep it or sell it.....but do the swap on something else!

best motor in the world

@TexasBeardAdventures

4 жыл бұрын

100 % AGREE

The come-apart is way better than the fix liter!

@TexasBeardAdventures

4 жыл бұрын

+7710 power YES SIR.........Hahahaha

Found you through Stephen Cox channel subbed now keep up the great work

@TexasBeardAdventures

4 жыл бұрын

+Antonio Claudio Michael Much appreciated! I’ll try to crank out the best content I can! Thanks for watching

Whats the phone number to the pace that sells the conversion kits

@TexasBeardAdventures

3 жыл бұрын

Google Diesel conversion specialist.....tell them you found out about them from my KZread channel!

At 500hp that trans is living on borrowed time let alone 1000hp😂😂😂

GREAT VID... I DID THE 05 F350 CONVERSION WITH THE 5.9 CUMMINS AS WELL.. I BOUGHT A SECOND 5.9 CUMMINS I'M MAKING A MONSTER 2 ROTATE IT OUT WITH.. NEVER BEEN SO HAPPY.. I DID GO WITH THE DODGE SIX SPEED AN TOOK OUT THE AUTOMATIC AN I HAVE A SNOW PLOW AN GOOSENECK RV AN OTHER TRAILERS.. NOT GOING 2 WINE WITH MY CHEESE .. MY GRANDPA DID IT SO. SO CAN I... PEACE

Makes me want to swap my 5.4 out for a Cummins

@TexasBeardAdventures

4 жыл бұрын

If it was up to me I’d put a Cummins in everything I own! Love that motor

@jackskonieczny2353

4 жыл бұрын

I'm thinking bout 5.9 swapping my 5.4

@TexasBeardAdventures

4 жыл бұрын

Jack Skonieczny get after it!

I like that fastback mustang. I’m guessing a 70?

@TexasBeardAdventures

6 жыл бұрын

Thanks, it’s a 1969 Mach 1 R code! A lot of fun to drive. I’ve got another video of me working on the mustang coming out in a day or so.....STAY TUNED

@wespower133

6 жыл бұрын

Texas beard adventures ah. That’s awesome we’ve got a 69 Mach 1 also. It’s a 351windsor car. When you see the blacked out rear panel I immediately thought 70 but it’s funny because our 69 also has that panel blacked out. I’ll eventually get some videos up on it. Sadly it’s been sitting for a little while got too much going on.

@TexasBeardAdventures

6 жыл бұрын

WESpower13 Awesome, I know the feeling of too much going on!!

Idk why ppl don’t just get a rusty 2 gen and swap everything even wiring so it thinks it’s a dodge

@TexasBeardAdventures

5 жыл бұрын

+Big Whane not sure.....may be worth the try?

@ratherbefishing4225

3 жыл бұрын

How would you set up the gauges and stuff then? Probably easier to change the wiring than to put a dodge panel in the Ford

Are you using the stock 6.0 turbo?

@daddysteel3514

5 жыл бұрын

Kirk S he said hx 35 modified so no it’s not a 6.0 turbo

He just saved a lot of $ by doing this swap/not buying tons of 6.0 parts. Throw a stick in it & you have the perfect apocalyptic vehicle.

@TexasBeardAdventures

3 жыл бұрын

Thanks Michael, trust me the swap was not a decision made lightly. It takes a lot of commitment, patience, amd money to get through it. I agree about the standard trans ........if my 5r110 starts giving me troubles I’ll definitely be putting a standard in there!

@texastoys5874

3 жыл бұрын

That's what I'm looking at doing on my 03 6.0 it's a zf6 truck

Is it just me or does the cummins look even better in a ford also did you use the ford or dodge power steering pump? Steven Cox sent me

@TexasBeardAdventures

4 жыл бұрын

+Heath Mcallister I think the Cummins looks way better in a Ford! 🤠😝 I used the dodge power steering pump. Thanks for showing up. 👍👍

@TheFordf350superduty

4 жыл бұрын

@@TexasBeardAdventures sweet the only thing the 6.oh no is good for is putting up to teach the future generations how not to engineer and build motors although I thought the gm 350 diesel would have been enough but I guess some times you need extra lessons lol 👍😥

@TexasBeardAdventures

4 жыл бұрын

+Heath Mcallister lol......ain’t that the truth?!

Honey look, 70k views! I told you it was gonna be rad! You believe me now? ;)

I'm getting ready to do this in a 2010, I haven't decided who I'm going with yet though.

@TexasBeardAdventures

6 жыл бұрын

D Leighton I would call and talk to several of the companies that provide parts and technical service. See if you hit it off with one of them. I just purchased a Land Rover for my wife that I am gonna put a 4bt Cummins in so I called DCS for some information. I probably talked to them for 20 minutes and didn’t purchase anything. Good guys in my opinion.

They did put a cummins in the superduties... its belt pattern is LITERALLY under the hood and says what countries had it

@TexasBeardAdventures

3 жыл бұрын

No kidding.....I didn’t know that. How much would it cost to bring one over from another country???

How much did paid for whole job

@TexasBeardAdventures

6 жыл бұрын

Elias Velasquez 5k-10k if you don’t have your motor rebuilt.

@domingo2290

5 жыл бұрын

What if i do have a rebuilt motor

@EpicNick22Gaming

5 жыл бұрын

Domingo Flores is your asking questions like that you should be doing the swap

Has anyone seen a Ram with a powerstroke ?

@CarsTrucksWhatever

5 жыл бұрын

Lol

@TyrannicalReigner

5 жыл бұрын

They aren’t worth putting a different motor in

@robk2c954

5 жыл бұрын

@@TyrannicalReigner ya only a cummins is worthy .

@hashslingingslasher4215

5 жыл бұрын

I have

what did it cost you after you done everything

@TexasBeardAdventures

6 жыл бұрын

jhon smith It was approximately $10k for the Truck and $10k-$12k for the rebuilt motor and all the conversion parts.

This sad for the ole six leaker, truck is phenomenal once done. I build them every single day never have a comeback

@TexasBeardAdventures

5 жыл бұрын

Anthony Kerber thank you I love my truck and will hopefully do another one some day! Where are you at?

@Cetaneandpoontang

5 жыл бұрын

6.0> 5.9 The 6.0 is a great engine we do them weekly with no issues.

@anthonykerber2293

5 жыл бұрын

We are located in Glendale Arizona

@elis51501

5 жыл бұрын

What’s your cost to bulletproof the 6 liter?

Here for the diesel content.

@TexasBeardAdventures

4 жыл бұрын

Awesome

Thankfully youtube allows us to watch videos at 1.25

Nv 5600 6 spd from eaton fuller

@TexasBeardAdventures

5 жыл бұрын

+ryan tunbridge is that a good trans?

@rtunbridge

5 жыл бұрын

@@TexasBeardAdventures oh fuck yeah

I'm not a DCS fan, their products were inferior back in the day when I did mine. What really done them in for me was I had a negative interaction with the owner of DCS when he was showing his products at Bandimere Speedway just outside of Denver, CO. He was rude, condescending and turned several of us who were very interested away, just because of his disagreeable nature. I had the total opposite experience with the guys at Destroked.com. They were overly accommodating and genuinely interested in my project. Great video BTW!

@TexasBeardAdventures

6 жыл бұрын

John I’m sorry to hear that, I’ve never personally met any of the folks at DCS or DESTROKED but my experience was great with DCS. I’m not sure why the owners name is so I can’t say if I dealt with him or not, but the guys that did help me were nothing but polite, positive, and cared about my project. I’m glad to hear that DESTROKED is a GOOD company to deal with. Do you still have your truck? What did you put together?

@DIESELLBZ

5 жыл бұрын

John b

@nvboatguy

5 жыл бұрын

I am a Ford guy- I just like their trucks, interior, suspension and looks. That said, I own 4 Cummins diesels in Dodge first gen trucks. I bought an 06 Ford 6.0 4wd Crew cab on eBay specifically to do a swap, but the dealer who sold it to me ($5500) told me that it ran too well to swap it now. He said it got good mileage and ran great! What he didn’t know was that the BLM owned the truck and the motor blew at 167k, and they had Jasper Engines do the rebuild. It has 33k on it and runs well- but leaks oil, throws check engine lights and gets 11 mpg empty. And the electronic transfer case isn’t engaging. One of my Cummins is a spare motor with a Zf 5speed with transfer case- which- after reading your blog- is going to go in. I just need to pick between DCS and Destroked for motor mounts. I saw Destroke’s in another video and they look spectacular. What were yours like?

El guero negro 0:40 😂

@TexasBeardAdventures

4 жыл бұрын

The one and only!! Thanks for watching

if dcs is the best there is, i don't want to know the worst so much was off in what their book says to do, and i had about another grand worth of shit to purchase in addition to the "comprehensive" kit... got truck running today, damn engine needs injectors...

@TexasBeardAdventures

6 жыл бұрын

Agreed they aren’t perfect and I had to purchase a bunch of stuff also, but what I mean by technical support is they always answered the phone or called me back in a timely manner. They got me answers when I had questions. There’s always room for improvement......I heard other companies won’t answer the phone or call you back when you have questions so then your there scratching your head like WTF NOW!!

At the gas pump

It’s like putting a chandelier in an old shitty crack house. There’s a reason why nobody puts a powerstroke in a dodge

If Ford can't do anything else they can make the best AC ever always.

@TexasBeardAdventures

2 жыл бұрын

I think I will try to convert it back to the ford AC compressor…….it just doesn’t blow as cold as it could. Thanks for watching Jeff🤠