Fully Built 99 Mustang GT NA 2V Flowmaster vs Spintech Before And After
Автокөліктер мен көлік құралдары
The cherry on top in my opinion is from about 7:43 to the end of the video 😁. I wanted something besides the typical Flowmaster sound for this car. I've been working on it for about 2 years now and I'm finally done! I love the sound of these Spintechs! They're just what I was hoping for in this setup.
This is a stroked 4.6L 2V running N/A with a Teksid aluminum block, Eagle forged crank, h-beam rods and pistons, stage II Crower blower cams, ported stage II Patriot heads (port matched and milled by Mike Chapman at Chapman Racing Heads), running 10.56 : 1 compression, Trick Flow aluminum valve covers (hate 'em), BULLITT intake, BBK long-tube headers, Spintech Super Pro Street 9000 mufflers, BULLITT sway bars, BULLITT subframe connectors, BULLITT brakes, raceland coilovers and C/C plates, MMR tubular k-member, MMR control arms and MMR bump steer kit with solid rack bushings. I'm sure I'm leaving something out. I know the car was DIRTY when I filmed this 😂
Пікірлер: 91
1:19 flowmaster 5:31 spintech
Dude that sounds awesome!!!!! 🤘
@ponycorral99
Жыл бұрын
Thanks!
It sounded to me like the car decided to raise its voice after constantly being interrupted by other loudmouths 😂
Really makes those cams more pronounced. Love it
This man knows about chop!!! I got them on my 86coupe.
@ponycorral99
Жыл бұрын
Excellent! That's a great sounding engine.
Thanks for doing this , this made my mind up , wow spin tech nice ,
@ponycorral99
2 жыл бұрын
Great! Glad you enjoyed it. I've sure loved 'em.
Sounds great btw
Keep the videos coming!
@ponycorral99
2 жыл бұрын
Thanks! Will do! I'll clean it up before the next shoot 😁. I was anxious!
@TheModAddict
2 жыл бұрын
@@ponycorral99 dont worry about that. Half of my videos have clutter and messes.. lol
The sound I'm looking for. 👍
I love the sound of the spintech 9000's and about to install on my Lightning later this year!
@ponycorral99
Жыл бұрын
I bet they'll sounds sick on your lightning!
@3500camarz
Жыл бұрын
@@ponycorral99 kzread.info/dash/bejne/dnqfs5lrhty_XbA.html This vid is the reason I decided on spintech!
Sounds awesome
@ponycorral99
Жыл бұрын
Thanks!
Best muffler for a 2v hands down. Doing a pro chamber on mine. Have had my 9000s on for 3 years now.
@karlhopkins713
2 жыл бұрын
They don't sound that good in the revs but, when driving they sound completely different. You can actually control the rasp based on throttle input.
@ponycorral99
2 жыл бұрын
I agree! They sound great and they are surprisingly mild while driving and just cruising.
From apprehension to oh yes in turn of the key and one press of the throttle. I did the same thing when I had a 6000 Prostreet put on my truck. Calm and throaty on the highway but a big middle finger when you need it.
@ponycorral99
2 жыл бұрын
Amen, brother!
Man that sounds fucking good! Your reaction is priceless 😂
@ponycorral99
2 жыл бұрын
😂 thank you!
@3500camarz
Жыл бұрын
I agree, his reaction was great! That's what makes these videos fun to watch is when the person recording has fun in the video.
@petrolhead8851
Жыл бұрын
@@3500camarz yeah that really made the video great, the fact that he didn’t hold back his real emotions. He was like a little kid who just went inside Chuck-E-Cheese for the first time lol
@petrolhead8851
Жыл бұрын
@@ponycorral99 how tall are you man? You look like a giant, idk how you fit in that car lol, I’m only 5’9” and it’s a bit uncomfortable for me, I hate the way the stock seats make you sit kind of high on the 94-04 mustangs, I can’t wait to get some low rise seats for my 96 cobra and my 03 Mach 1
@ponycorral99
Жыл бұрын
@@petrolhead8851 lol! I am 6'4. You are right, I need the seat back most of the way and I have to lean it back a good bit so that my head is not always touching the headliner. I consider them a two-seater since there's no way someone's riding in the backseat behind me hahaha!
Thats a ture music, well done sir
@ponycorral99
Жыл бұрын
Thank you very much!
Music to my ears
@ponycorral99
Жыл бұрын
Thank you!
Sounds good I just added some to my 95 331 stroker but mine dumps at the axle 👍🏽
@ponycorral99
2 жыл бұрын
That's awesome!
@ponycorral99
2 жыл бұрын
Love the sound of those on that engine!
Sounds like the tune may need adjusting. Sounds great
Tailpipe diameter does effect sound quite a bit, especially if there's a large tip like Magnaflow uses. Magnaflow does have the nicest fitting out of the box cat back that I've ever installed fwiw. Anywho's, I've run 2 sets of Spintech mufflers, the sound is unique and I definitely dig them, my car sounds absolutely evil with them. I will say this though, if you want to add a nice touch to the Spintech sound change out the H pipe for an X. It really cleans up The high rpm sound and gives like this evil high pitched shriek!!
@ponycorral99
Жыл бұрын
That's awesome! If it's the high RPM V8 scream that you get with a high revving 289, I might have to try that out (with the x-pipe). I actually have some other mufflers I want to experiment with too, so I think I'll be clamping things together this time rather than welding it.
I think i may get these for my 04 Marauder
@ponycorral99
9 ай бұрын
Cool! You don't see those around very much! That should sound nice!
Next time you get bored try the Pypes Violators. Best I ever heard. Regards from Ody Slim
Very nice 👍..Any plan’s for boost??
@ponycorral99
Жыл бұрын
Hey thanks! I haven't really decided. I have another 99 GT that is stock. I have an engine I want to build for it that I'm slowly accumulating parts for. I may boost that one instead and leave this one NA. We'll see, though.
Sounds way better!
@ponycorral99
Жыл бұрын
Thanks Mike. I have to agree. I still love them!
Holy fuck that car sounds incredible!! I have a Flowmaster 40 muffler on right now with cats. I’m looking to grt spin tech mufflers. Best sound I’ve heard now on these cars. I can’t decide whether I should go with a H or X pipe?
How loud are these Spintechs in person? I ordered them for my fully built 3V and I'm afraid I'm gonna be getting tickets left and right lol
Sounds amazing! Out of curiosity, is your New Edge for sale?
@ponycorral99
2 жыл бұрын
No sir. Why do you ask?
@spoticus3000
2 жыл бұрын
@@ponycorral99 I was just curious, that's all. It's an awesome build, though. Looks clean, sounds great!
@ponycorral99
2 жыл бұрын
I see. Very much appreciated! It's been a fun project for sure!
@ponycorral99
2 жыл бұрын
@@spoticus3000 The car has about 104k miles on it. I did a full rebuild on the engine. It's a teksid aluminum block with a stroked and forged bottom end. It has ported heads, stage II cams, bullitt intake, long tubes and runs just a touch over 10.5:1 compression. I also run 4.10 gears and have it sitting on raceland coilovers and a complete MMR front end. I'm glad to stopped to check it out!
Why do you still have stock cats up front
hi can you put a link of actual product please i have a 2003 mach 1 i wan to put your exact same spintechs please.
Sounds good what Cams are you running?
@ponycorral99
2 жыл бұрын
Hey thanks! I'm running Crower stage 2 blower cams. (PN- 62802)
@jeremykeck8047
2 жыл бұрын
Nice. Getting ready to Cam my 03 gt . FBO with 4.10 s out back.
@ponycorral99
2 жыл бұрын
@@jeremykeck8047 that's exactly what I did. I'm running the same gearing too! Lots of fun! If you have any other questions about my setup just let me know. I'm happy to share.
What kind of tune is that
So those mufflers are 2.5" and 2.25" from the muffler back out over the rear end?
@ponycorral99
Жыл бұрын
That's correct... I need to get it opened up the rest of the way, but for now, it is what it is.
@reggiesanders1229
Жыл бұрын
@@ponycorral99 I wouldn't change a thing!
@ponycorral99
Жыл бұрын
Lol, thanks.
Where did you buy the stroker kit?
@ponycorral99
2 жыл бұрын
I actually purchased the car ($1,400) from a guy that had already built the engine. Shortly after that he had a catastrophic engine failure (sheared the woodruff key on the crankshaft). That resulted in a damaged camshaft, a ruined crankshaft a cracked head, all bent valves. The list goes on. Anyway, I bought the car from him in pieces. He carted the car around with him over the next decade hoping to rebuild it at some point. His son attempted to eventually but just succeeded in taking it down to baggies full of nuts and bolt and gave up. It sat that way for several years. I had to tear the engine down the rest of the way and had the block checked out to make sure it was still okay. I was able to save the cam and crank by having them welded and machined to spec. I replaced the bearings, rings, oil pump, timing set, one head, all the valve train etc. The rods and pistons were still good. Sorry for the lengthy response, but to answer your question, I did not buy the kit. I salvaged what I could from what someone else did. I know there are several options available out there, though.
Who built your engine or did you build it yourself?
@ponycorral99
2 жыл бұрын
Justin, I did the build on this one.
Why the hell wouldn't you do a 2.5" tailpipes when you put the new catback on????!!!!
@ponycorral99
Жыл бұрын
Technically all I put on were mufflers... "Catback" would have included tailpipes. The mufflers came with the flow tubes but not tail pipes. I used what I had. I'm sure I'll change them out eventually. My brother has some BULLITT tips that he said I could have that are the nice looking rolled lip. I may do them when I get those. Thanks for watching!
Which series Spintechs?
@ponycorral99
2 жыл бұрын
They are the 9000 series
I’m surprised about your GT. Usually it’s the V6 mustangs that come with that type of hood and those small side scoops
@ponycorral99
Жыл бұрын
99 and 00 came with those. I believe it was 01 when they transitioned to the larger ones for the GT. Thanks for watching😁
@riddles4237
Жыл бұрын
@@ponycorral99 oh ok 👌 got it 🙂👍
Another exhaust video without a Rev or a drive thanks for wasting my
You literally replaced raspy garbage with raspy garbage
@luisuribe5432
2 жыл бұрын
Nah
@NXT_LVL
2 жыл бұрын
lol thats why Ive had people ask me what muffler I'm running because they're confused and are like those aren't Flowmasters and those are Magnaflows so what are they? Mission accomplished. Carven, Blackwidow and others sound too metallic and are better for the higher rpm range. Every new 5.0 mustang I've heard sounds metallic and hollow. Whereas the owner and creator of Spintech made exhaust for dirt track oval and NASCAR if I remember correctly. "feel the thunder" as a tagline.
@luisuribe5432
2 жыл бұрын
@@NXT_LVL yeah i think the corsas sounds good too but I’ve never seen one on a 2v
@ponycorral99
2 жыл бұрын
That is awesome! I didn't know that. I love 'em.
@3500camarz
Жыл бұрын
I disagree with you Bad Pony. The Spintech 9000's sound great on a 2V and is exactly what I will be installing in my 01 Lightning later this year.