FULL VIDEO BUILD F-16D Block 52 Advanced Fighting Falcon by Hasegawa
Тәжірибелік нұсқаулар және стиль
Limited edition of the Hasegawa 1/48 scale F-16D Block 52 Advanced Fighting Falcon kit.
Tools and paints used in this video:
REVELL Masking tape, Tamiya Masking tape. 3M tape.
REVELL Contacta professional
Mr. Cement S
Tamiya and Olfa craft tools.
GSI: Mr. Mark Softer. Gundam GX Colors.
Vallejo, Surface Primer Black, Gray.
FS: 36375, 36320, 36118, 36270, 36231.
Tamiya X-1, Xf-1, Xf-2, Xf-4, Xf-5, X11. XF49, XF-19, XF66, Clear blue, Clear Red.
SPARMAX Airbrush used in this video:
Sparmax SP-35
Highly Recommended!
Please visit SPARMAX store (North America).
store.sparmaxair.com/
Please visit SPARMAX store (Europe).
www.sparmaxair.de/
www.sparmaxair.de/
You can directly contact SPARMAX team for more information about product availability & sales @
info@sparmaxair.com
Music copyright ® by KZread Audio Library and
Nice And Easy by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
Forever Believe by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
V for Victory by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
Wheels by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
TV Drama Version 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
Thanks for watching!
All the best!
Dusan.
Пікірлер: 201
the level of control you have with the airbrush is absolutely amazing. another fine build.
@ScaleModelAircraft
8 жыл бұрын
Thank You for kind words! All the best! Dusan.
I remember building a 1/48 Hasegawa F-16 in the 1980s and I think it’s still the only kit I’ve ever built that didn’t require any filler.
again the realism and scale look you put into this is great. well done!
@ScaleModelAircraft
8 жыл бұрын
Thank You! All the best! Dusan.
Amazing work as always, just the right amount of weathering .
@ScaleModelAircraft
8 жыл бұрын
Thank You! All the best! Dusan.
Amazing work! The modeling of the 90’s or earlier times, does not compare to the modeling of today. If you look at old model boxing from 90’s and earlier times, the models looked like they were done by a 4 year old. It didn’t have detail or anything. Modeling has come a long way. I thought modeling was going out of style since the introduction of the video games,but since KZread.. I was totally wrong. It is still a very popular Hobby. Thank you for your video. Keep up the good work.
Great work there of the Republic of Singspore Air Force F-16D that looks fantastic indeed 👍👍😁😁
Another great job, Dusan.
Finally! A modeller who builds aircraft from this generation.
@ScaleModelAircraft
7 жыл бұрын
lol :-) Thanks! All the best! Dusan.
Спасибо вам за отличные видео!! Смотрю с удовольствием:)
Great color scheme! Master of the airbrush you are!
Smooth & clean model, just the way I like it! 😍
Brilliant build! My next Time-Lapse video shouldn't be too long now! Keep up the awesome videos
@ScaleModelAircraft
7 жыл бұрын
Thanks! All the best! Dusan.
@arandomf-14tomcat77
7 жыл бұрын
ScaleModelAircraft Ok im just wondering how the alcohol technic worms and what does it do
Great job, amazing!
Great work!
Wow, great work on this!
@ScaleModelAircraft
8 жыл бұрын
Thank You! ! All the best! Dusan.
Turned out beautiful. Just ordered some of those sanding sticks.
Great panel lines and appreciated the restraint in weathering. Not every aircraft should look 30 years used. lol
@ScaleModelAircraft
8 жыл бұрын
Yes :-) , Thank You! All the best! Dusan.
Nice work!! As always👍🏻
@ScaleModelAircraft
8 жыл бұрын
Thanks! All the best! Dusan.
From a Singaporean, nice job on one or our birds!
@joecalobeer6396
3 жыл бұрын
I was wondering where that cockade and fin flash came from! Singapore👍🏼
My favorite jet plane Dusan! i have to get me one of those! great build as usual!
@ScaleModelAircraft
8 жыл бұрын
Thank You Alex! All the best! Dusan.
Currently on my bench I have a Hasigawa F16 and a Tamiya F16 both 1/48 and that’s about where the similarities end. The Hasigawa I’m making as a diorama from AMARG wings off and on wooden trestles/stands etc and the Tamiya will be a drone block 30. You can sure see the difference between the brands especially on the bird cutters “lump” but this is shaping up to be a really nice model which always is more rewarding with a average kit like the Hasigawa.
Another great build! My own Revell P47D is underway. Having to re-do the seat belts having obtained a smaller brush!!
@ScaleModelAircraft
8 жыл бұрын
Thanks Chris! All the best! Dusan.
Dusan - You are good! You are sooo good, you make even ME think I could do this! Thank you for this great example. Now if I could just do it in 19 minutes…! TR
@ScaleModelAircraft
7 жыл бұрын
Thank You! :-) All the best! Dusan.
Awsome effort !
@ScaleModelAircraft
7 жыл бұрын
Thank You Robert! All the best! Dusan.
FINALLY !! AT LAST ! He start to build again , fantastic :-) You are my inspiration . Keep up the good work . what's next project ?? greetings from Norway !
@ScaleModelAircraft
8 жыл бұрын
John, Thank You for kind words! There will be more video builds... please stay tuned ;-) All the best! Dusan.
GREAT WORK
saludos.. excelentes videos.. a la expectativa de mas .. de verdad mil felicitaciones..
this is amazing
Love it, Sir.
@ScaleModelAircraft
7 жыл бұрын
Thanks! All the best! Dusan.
Great job!. The first curious thing I saw in a real F-16 (USAF) was the AIM-120 missile wings; it was in pure steel colour, not painted.
@ScaleModelAircraft
6 жыл бұрын
Yes, stahl. Thank You! All the best! Dusan.
great job! fantastic!
@ScaleModelAircraft
8 жыл бұрын
Thanks! All the best! Dusan.
Super build!
@ScaleModelAircraft
8 жыл бұрын
Thank You Ray! All the best! Dusan.
Beautiful
Great build.
@ScaleModelAircraft
8 жыл бұрын
Tnaks! All the best! Dusan.
You are the master JEDI of plastic modelers ! =)
@ScaleModelAircraft
7 жыл бұрын
lol Thank You! All the best! Dusan.
Great job!!!
@ScaleModelAircraft
8 жыл бұрын
Thanks! All the best! Dusan.
Interesting that Hasegawa moulded the CFTs (Conformal Fuel Tanks) in plastic. This first release of the F-16D Block 52 Limited Edition came with resin cast CFTs and markings for the Hellenic Air Force.
@ScaleModelAircraft
8 жыл бұрын
Yes, becouse of the series like F-16I Sufa and Desert Falcon E/F Block60 and like this one, the advanced D, thay made a extra sprue. You are right I had that kit with extra resin parts. 2 part cft and HAF markings. All the best! Dusan.
beauty lovely airbrush work too
@ScaleModelAircraft
7 жыл бұрын
Thank You for all Your comments Damian! All the best! Dusan.
Very skilled.
Excelente vídeo saludos desde Chile a mi también me encanta los aviones y él aeromodelismo y feliz navidad 👍👍🇨🇱
Very nice build, remember to check your refrences , the light gray for the tail, and cocpit area is not -375 it's 26270. for the radome and all antennablisters you can use -270 with a drop of FS 36118. also make sure your cocpit layout is correct. most of the block 50's was redone in the late 90's to facilitate NVG's , that means all the cocpit panels are flat black. I do beleve all the Block 50/52's have that as a standard from the factory. Again check your refrances for the particular jet. The F-16 will never or atleast very seldom fly with AIM-120's on station 2/8 as it does mess up the stabillity of the wing some. They will however always fly them on station 1/9 (Wingtips) , with the occational sidewinder/IRIS-T or AMA-pod on station 2 or 8.
Hey man! Excellent build! I was wondering, I tried using the Tamiya polishing compound however I was left with like a reoccurring cloudy residue, any ideas?
@ScaleModelAircraft
7 жыл бұрын
Try with alcohol, maby can remove that residue. Thanks! All the best! Dusan.
Nice build. What do you put on the stick to hold the small parts for painting ‘
Hi. Awesome work. But I am curious because it appears @14:45 there was a lot of shading and contrast work to the fuselage. Then @17:10 it appears to be all sprayed out with the clear coat! Where's all that detail and hard work gone ? Is the film not conveying the detail with the overcoat spray?
Dušane svaka čast!
@ScaleModelAircraft
8 жыл бұрын
Hvala! All the best! Dusan.
She's very smart in Singapore markings .
great job
@ScaleModelAircraft
8 жыл бұрын
Javier Thanks! All the best! Dusan.
I'm building a Hasegawa F-16D and insanely interested how you installed the cockpit instruments after gluing both halves together.
Excelent 👍👍👌👌
Ah, it should have been the HAF one. Great work as usual, mate. F-14 Tomcat next. You know you want to.
@MrBioniclefan1
8 жыл бұрын
yeah I know right
@ScaleModelAircraft
7 жыл бұрын
I have other kits for HAF build. Thanks! All the best! Dusan.
realy nice job m8 congratz :D
@ScaleModelAircraft
8 жыл бұрын
Thank You! All the best! Dusan.
wait... why did you cut the missile support on the exterior wings and then replace it? mistake on your part? or...
What PSI are you spraying the colour coats at? about 15-20?
I like your videos very much and i am a big fan of you
@ScaleModelAircraft
8 жыл бұрын
Thank You Jakob for kind words! All the best! Dusan.
Hi, I'm a novice. May ask what is this (6:39) step for ? Thank u
I know this video is two years old, but "Big Mouth" inlets are only on GE Engines, and if this is a Block 52 (which is a PW engine) then it should be the small mouth.
I've always wondered, what are the reasons why a person would choose a hasegawa over a tamiya kit or an academy kit or vice versa? Does each brand have their own pros and cons? Thanks to anyone who replies!
nice build :)
@ScaleModelAircraft
8 жыл бұрын
Thanks! All the best! Dusan.
Awesome
@ScaleModelAircraft
7 жыл бұрын
Thanks! All the best! Dusan.
May I please know what you use to attach the small parts onto a stick before painting them. Thanks.
@ScaleModelAircraft
7 жыл бұрын
I am using blue tack/Uhu patafix. Thanks! All the best! Dusan.
Sir hi, why you did not putty the wing root ??
Hello. What do you use to stick the part to the little wooden srtick for painting them?. Great video, I enjoyed it a lot. Keep on doing more!
@ScaleModelAircraft
7 жыл бұрын
Thanks! I use blue-tack or UHU patafix. please search it on google, it is a great way for holding the parts. All the best! Dusan.
Ficou show
Hi! what sanding file are you using?
beautiful build as usual! I'm just curious as to how you kept a crisp sharp line between the black spine, and the grey sides that lead to the wings, as you were painting the grey, without the use of masking tape. can you tell me how you did that?
@ScaleModelAircraft
8 жыл бұрын
Hi, please look @ F-4F Revell video build. For more hard edge result I am using bluetack (In this cas pata fix UHU) to mask. Thank You! All the best! Dusan.
@huntercraft1668
8 жыл бұрын
I ask because when you were spraying the wings, and the area close to the rib on the F-16, you were spraying the base color on, and there was no masking tape or blue tak, yet the line was crisp with no over spray. You can see what I mean at 14:22. I was wondering how?
Hi dude! I've got the Hasegawa 1/48 F-16F and with some exceptions these 2 kits are almost identical. On the fuel tanks I've found out that the panel lines are not recessed (so they are positive, not negative). How did you deal with that?
@ScaleModelAircraft
7 жыл бұрын
There is one older re-box with positive panel lines, also there is a box with resin CFT. This box comes with the new spine and CFT, like Sufa box the rest of the kit is a plane F-16D. All the best! Dusan.
2 questions 1. What sanding stick are you using 2. What is the brand of the gloves .
I believe that's the Singapore merlion logo in white, hmmm had no idea my country has this in our arsenal. Good work at the same time!
@ScaleModelAircraft
7 жыл бұрын
Singapore, Thanks! All the best! Dusan.
@Kelvin_Foo
7 жыл бұрын
Hasegawa re-released this with "Peace Carvin II 20th Anniversary" markings in December 2014 in the "Singapore Air Force Special" box, no.07393
Da te pitam, gdje narucujes modele od hasegawe i academy-a ?
Kardeşim bu ürünü nereden aldın veya nereden hangi siteden sipariş verdin nereden aldıgını yazarsan bende almak istiyorum birde kaç para ? Cevap yazarsan sevinirim . Güzel olmuş iyi iş ;)
bravo bravissimo
@ScaleModelAircraft
8 жыл бұрын
Thank You! All the best! Dusan.
Really enjoyed this, feel free to build more F-16's. May I suggest the Kinetic F-16I "Sufa". Great looking subject.
@ScaleModelAircraft
7 жыл бұрын
I have the Hasegawa kit. Maby in the future. Thank You! All the best! Dusan.
@bowser515
7 жыл бұрын
Well that's probably a much better option to be honest, I look forward to seeing it in future if you do take it on. All the best.
I use the same revell glue either, but the glue always dries and get stuck in the needle... how can you handle that?
@ScaleModelAircraft
7 жыл бұрын
I leave the glue with the needle down. Sometimes I heat the needle... All the best! Dusan.
What PSI do you spray at? :D
Fantastic build. I noticed you didn't use the conformal fuel tanks. Thanks.
@rafaelc.gonzales9060
6 жыл бұрын
BennyCFD how to build 2kits
@rafaelc.gonzales9060
6 жыл бұрын
How do I builds conformal fuel tanks from plastic?.
What airbrush are you using?
was this all acrylic paint that you used
Dusan, I admire your airbrush skills..... I see your using a SPARMAX airbrush.... but what air pressure do you spray at? ("psi") ... Do you change your "psi" between enamel paints and acrylic paints? and finally what mixture ratio do you use with enamel/acrylic paint (paint to thinner)? as always... It's great to see your work......
@ScaleModelAircraft
8 жыл бұрын
Thank You for kind words! I am using Sparmax SP-35 and Sparmax Sp-20X. Color ratio is complicated subject because it depends on weather at Your location. I am using the color mix (50-50) enamel paint and thinner. Approx 60t-40c mix for acrylic paind but you will need more coats to cover the surface... pressure approx 1,3-1,5 Bar. But please, this can slightly vary depending on your airbrush (Nozzle-nedle...) All the best! Dusan.
i want!! u should totally ship it to me!
Sanding which model is this ?
This F16 having decals of which Air Force ?
great build.. can you tell us about your sanding sticks?
@ScaleModelAircraft
8 жыл бұрын
Cheap nail sanding stick from DM drogeriemarkt store. (1.5 euros). All the best! Dusan.
Did you use Vallejo satin varnish unthinned, there no clog problems?
@ScaleModelAircraft
6 жыл бұрын
Weird enough, I haven't any problems with clogging. Straight from the bottle. SP-35 Sparmax AB with 0.35 nozzle higher a. pressure. All the best! Dusan.
What paint do you use?
Where are the Conformal Fuel Tanks?
I noticed that you leave the cap from the cup on your airbrush on the table , can I do that with my airbrush ? Is it better to airbrush without the cap ? Thanks for the help :-) GREETINGS FROM NORWAY :-)
@ScaleModelAircraft
7 жыл бұрын
You can spray faster without the cap, but it is a minimal difference in paint flow. All the best! Dusan.
Hey Dusan, sorry for the stupid question, but fast when you applied the black primer, managed create pre and pos shading , right? And I'm new in plastic modeling and so I'm asking...
@ScaleModelAircraft
8 жыл бұрын
Andre, there is no stupid question in modelling. Yes, I am using black primer to check panel lines and to make more deeper effect, including the preshading effect. Thanks! All the best! Dusan.
I asked this myself a few times, what does OOB stand for? Nice Build by the Way;) 👌🏻
@amuxpatch2798
3 жыл бұрын
oob is out of box ,no modifying with after market parts.
why do you start with black coat first?
@tommylakasi3022
5 жыл бұрын
43rocket what do you mean? Its a primer? Or its a black base its a common technique, you paint black underneath, and the. Do marble on top so that in the areas where there isn’t paint, its black. Other wise there would be no fake shadows
What was the cost on the kit itself?
good
@ScaleModelAircraft
8 жыл бұрын
Thank You! All the best! Dusan.
靠。超帥的。
I was just wondering if you were using 91% alcohol to wipe your model with or 70%?
@ScaleModelAircraft
7 жыл бұрын
96% All the best! Dusan.
Where's the Cockpit detail video?
use of different glues anybody??
Wow
@ScaleModelAircraft
8 жыл бұрын
Tnaks Lanc! All the best! Dusan.
you r my hero Dusan XD
@ScaleModelAircraft
8 жыл бұрын
Thank You Denny! ;-) All the best! Dusan.
sağol knk
@ScaleModelAircraft
8 жыл бұрын
You are welcome Doruk... But please... stay tuned ;-) All the best! Dusan.
is it just me or is almost every Hasegawa kit a "limited edition" kit?
So, is white glue basically stuff like Elmer's glue?
@ScaleModelAircraft
4 жыл бұрын
Pva, like the wood glue?
@flyingstormboyz3479
4 жыл бұрын
@@ScaleModelAircraft pretty sure that I posted this comment on the wrong video