thanks for this. I hate these plastic container filters, too much work. I wish they still had those small iron filters located near the engine bay which is more easier to replace.

@limamantapachitas

Жыл бұрын

I think there is another fuel filter canister near just below the air filter on the left side below. In the engine compartment laborious to change

@roughroadrunner88

Жыл бұрын

@@limamantapachitas ah yes, one primary and secondary fuel filters.

@angelo0001

5 ай бұрын

mopar still uses canisters like that im pretty sure

I like the way you work 😉

@MayoCarsDR

2 жыл бұрын

Thanks for comment

Good job buddy. I was curious to how labour intensive job was and now I know, thanks

@MayoCarsDR

Жыл бұрын

Thanks for comment

Big fan sir❤❤❤❤❤ ma apke har video like karta ho sir ❤❤

@MayoCarsDR

10 ай бұрын

Thanks for comment and watching video dear

Love it my man!!!!

@MayoCarsDR

Жыл бұрын

Thanks for comment

Thank you 👍🏻

That had to be the best car repair video I've ever seen on youtube for any subject. It presented the procedure in clear, incremental, step-by-step shots and did so without any talking. I do have a few questions though. First, I'm one of those people who is hyper-sensitive to the fumes emitted by raw gasoline. One time I had to be taken by ambulance to the ER of my local hospital because I'd unknowingly inhaled too much. I was replacing the fuel filter on a '96 Honda Civic and did the work outside, so proper ventilation was not an issue. Would you know if there is any type of facemask or air filter designed especially to filter out those fumes? Another problem I would have is the only workspace I have is the parking lot of the apartment complex where I live. Several of my neighbors smoke and they like to gather together in one or two areas in the lot and have a smoke-off. How far of a distance would I need to keep them at to prevent the entire lot from going kaboom and is there any way I could redirect the fumes in a safe direction? Third, where did you get that particular lockring tool? I've seen many different types available, but yours is the only type I would use because it applies torque to four points on the ring rather than just two. I've heard horror stories about how difficult that ring can be to remove even with the proper tools.

gracias por el vídeo desde Perú

@MayoCarsDR

3 ай бұрын

You welcome

Good job

Good👍

Thank you !!!

@MayoCarsDR

Жыл бұрын

You welcome

Good tutorial, i think using motor oil on the O rings could damage the rubbers. Do you think silicon could be a better option or the oil is going to get flush by gasoline. You changed the filter canister but i also see the new upper plastic . Is that included with the fuel canister. If not why is been changed?

@MayoCarsDR

Жыл бұрын

It should be oil only to apply any O ring

Thanks for you excellent video! Just wondering what’s the model of car in this video? My car is ZRE182R, do I have to buy that filter removal tool?

@MayoCarsDR

2 жыл бұрын

Thanks for comment,The car in this video is a 2017 model

@quintuneresman4936

Жыл бұрын

Yes, you will need to buy the filter removal tool. You can find it online. You can also find the whole canister as a replacement part instead of having to direct the canister in order to get to the filter. So much easier than this process.

Thank you soooo much.

@MayoCarsDR

Ай бұрын

You welcome

nice video, thanks for that. what song is used?

@MayoCarsDR

2 жыл бұрын

Thanks for comment

when is the right time to replace fuel filters?

@MayoCarsDR

3 ай бұрын

30000km to 40000 km

I have a question, what spray do you use to clean the top and the inside pieces?

@MayoCarsDR

Жыл бұрын

I always use gasoline to clean the parts

👍

Can you share its part number. Is it made in China, Thailand or Japan ?

👍👍👍👍👍👍👍

Hi! I just replaced fuel pump and fuel pressure regulator on a 2016 corolla... I'm having issues with warm starts, the car will long crank before starting.. do you think the filter can cause this issue? its only that, no lost of power that I can tell at least

@MayoCarsDR

2 жыл бұрын

Were the o ring all right? check fuel pressure

@MayoCarsDR

2 жыл бұрын

kzread.info/dash/bejne/fZx8s9J-gs7HeMo.html

@davidklaver6825

6 ай бұрын

Change your fuel injectors. I had the same problem and I changed mine and it starts easy like it should

Le pone aceite para lubricar y cuidar las conexiones pero te rompe todas la trabas de la tuerca azul.

@limamantapachitas

Жыл бұрын

Aceite no es recomendado para caucho, no se sí la gasolina lo va a lavar y solo es para que resbale y lo haga facil eecentrar en posicion

Btw..just wondering whats the millage of the car when this was done and whats the octane grade there? Iam currently on 190k and octane is 95 and 97 here in Malaysia.

@MayoCarsDR

Жыл бұрын

71964 km

@MayoCarsDR

Жыл бұрын

The fuel filter should be changed after 50,000 km

@limamantapachitas

Жыл бұрын

My corolla has 130000km never changed fuel filter, but I parked outside in a 6 C with lots of rain, battery drained It took runs of 5 seconds x3 to get it running with boostcables. Next day normal battery and immediate starting. Im wondering if was water due to condensation or filter. I dont have any warning lights. And it runs normal

tengo Toyota Corolla año 2022 se necesita el extractor

@MayoCarsDR

3 ай бұрын

What is this?

Lexus nx200 gasoline filter?

@MayoCarsDR

2 жыл бұрын

Do you need the fuel filter number?

@alirezaatashi5747

2 жыл бұрын

No! I want to change the gasoline filter

Bos saan ang shop mo

I need to tool to remove the locking ring. All i have access to is straight screwdrivers and hammers

@MayoCarsDR

Жыл бұрын

Thanks for comment

Is there not another fuel filter within the fuel lines?

@MayoCarsDR

23 сағат бұрын

No

vieran como salen esos filtros internos de la bomba de gasolina aqui en Venezuela🤣🤣🤣🤣🤣

How many kilometers need to change fuel filter?

@MayoCarsDR

Жыл бұрын

The fuel filter should be changed after about 50,000 kilometers, so the fuel injectors are always fine

@rainerjavelosa1164

Жыл бұрын

@@MayoCarsDR thank you

💯❤👍👍👍 One question: you put engine oil on the rubber part for lubrication, is there any worry about erosion of the rubber in the far future? After all, the fuel filter will stay there for many years.

@MayoCarsDR

2 жыл бұрын

The purpose of applying engine oil is only to put the rubber in its place. Later that oil is lost due to petrol and there is no harm in it.

I usually vacuum the dust before opening the filter...

@MayoCarsDR

9 ай бұрын

Good

When i open the hosenwith the yellow clip fuel goes everywhere even when i run the car

@MayoCarsDR

6 ай бұрын

What I can help you

this is not a USA car. different set up in the us.

@MayoCarsDR

Жыл бұрын

Yes

Only 72K KM? Not 72K miles?

@MayoCarsDR

Жыл бұрын

It should be replaced after 50,000 km

that is one fucked up designed to be replace the fuel filter.....

This has to be the worst design I’ve ever seen for a fuel filter..good fast job for the experience

@MayoCarsDR

10 ай бұрын

Thanks for comment

most ridiculous thing I have ever seen to replace a fuel filter. This is routine maintenance shouldn't be a hour + long job.

Seat ke clip salamat hain yan tut gaye hain

@MayoCarsDR

2 жыл бұрын

G-set clips are fine

Do you have a link where to purchase parts or part number. Thanks

@MayoCarsDR

Жыл бұрын

No

We can only assume that he unplugged the negative terminal on the battery before continuing his work. =/

@MayoCarsDR

9 ай бұрын

Not a necessary

@mevansmrichard

9 ай бұрын

@@MayoCarsDR I changed the fuel pump today actually but the car only started once and didn’t turn back on. Spark plugs replaced, valve cover gasket replaced. Any other suggestions?

Pass 😂

pra que a música ridícula

Looking up the part number, for my 2013 it popped up a different one, is that correct? 77024-02180

@MayoCarsDR

2 жыл бұрын

Your car is american? You send me your car's Vehicle Number