WRENCH SIZE 13/16 5/8 Thank me later

@jbreezy93ftw

3 жыл бұрын

I was just gonna say why didnt these dummies say tool sizes lol

@tuck1473

3 жыл бұрын

Yes thank you

@jonm9538

3 жыл бұрын

You da man.

@xXcashXx3

3 жыл бұрын

K&N 3/4 5/8

@509evergreen

3 жыл бұрын

thanks big dawg

First thing you do is open the gas cap, pull the fuel pump relay in the fuse box, crank the truck a few times to release the fuel pressure. I don't mean to be picky, but safety is first.

@blainwilson7937

5 жыл бұрын

@Mary Lamb Who does that?

@gordoontb3016

4 жыл бұрын

Mary Lamb thanks save tips cause I’m doing mine today

@brayboy61

4 жыл бұрын

I was like when while he say this in the video lmao

@DHodges187

4 жыл бұрын

Bravo I learned this the hard way 7 years ago.

@willowj.murray7517

4 жыл бұрын

Just cycle the key or actually let it crank over?

For models built prior to 2000 the filter is under the driver's side door. Crawl under the door and look to the inside of the frame and you will see an inline filter. If the truck is a 4-door it is under the rear door on the driver's side. They are easy to get to. I think the location changed a short time after 2000 and may be in the tank itself. If this is true then it renders it unserviceable. As for wrenches, I just use a 16mm and an adjustable wrench. Just squeeze your nuts real tight with the adjustable wrench and hope for the best. This always gets the job done for me. For pricing a fuel filter for a 96' Silverado I called 3 store chains. Here's what I was quoted: Advanced Auto Parts=$13, Auto Zone=$7.88, O'Reilly= $9.99.

@2carpros

8 жыл бұрын

+David Brown Great additional information thank you for your comment, Please subscribe to our channel and like us on Facebook so we can keep creating good content for you.

@shortty7618

5 жыл бұрын

Thanks for this. Will make my job easier today :)

@austinsmith6714

Жыл бұрын

04 is the first year of returnless injection with the filter and regulator in the tank. 03 and earlier is return style. For V6 models 05 and up are returnless. At least that's what my Chilton manual says.

@chasewallace2002

Жыл бұрын

Just bought a new one for my 02 today they are 19.99 and the location hasn't changed its a single cab ir right beneath the door inside the frame rail but there's a couple things in the way

@davidbrown9390

Жыл бұрын

@@chasewallace2002 dang, Brandon’s inflation sucks!

Agreed that safety considerations are important. Great lighting and camera position. Could, however, have made the video shorter. Always love DIY videos like this.

Thanks for sharing, To keep it from spraying you should, first take off the fuel cap then Start the vehicle then pull the relay for the fuel pump and allow the engine to die to remove fuel from the system. Then shut off the key and continue with the removal.

@blainwilson7937

5 жыл бұрын

@Mid-west_man What's wrong with a little gas coming out?

@iSwanqa

3 жыл бұрын

Don’t do this you’ll ruin your injectors. Just let the gas spill out for Christ sake.

Please, when will people realize that it’s better to leave the video silent than put ANY TYPE of music

@2carpros

5 жыл бұрын

In 2016 or so I stopped putting music. So 2016. The new stuff has zero music. Thank you for watching anyway though!

good angle good lighting best video ive found on the subject thank you!

@2carpros

8 жыл бұрын

+lili battista Thank you

@pepsee_bro6903

3 жыл бұрын

@@2carpros why didn’t you mention the safety things to Avoid when doing this?

Looks like you instilled this without one of the o-rings, the one to the right?

Hey just wanted to know if you have half a tank of gas does it need to be empty so it won’t spill all of it or not?

great job and on video great editing

@2carpros

2 жыл бұрын

Thank you very much!

No mention in the video of where the fuel filter is or the wrench sizes. Thanks to others here I found the information.

I love brake line wrenches.

What size wrenches did you use?

Had my fuel pump changed,started running like crap a few weeks later,was told the spider needed to be changed.Fuel filter full of crud due to pump work.Good idea to change it a few weeks after fuel pump.

@Christina-fu5fn

Жыл бұрын

What is a spider

@Christina-fu5fn

Жыл бұрын

What r u referring to when it comes to changing the fuel filter

@Namedeeznuts

Жыл бұрын

@@Christina-fu5fn spider injectors are what alot of silverados have and it requires removing damn near everything in the engine to get to them. $1000 part and $1000 labor lol. Fuel filter is the little tube under the truck in this video.

Should state what size wrenches your using. 🤦‍♂️

Hi thanks for the video i have 08 lifted chevy silverado and when i stop at the light and then try to step on the gas to start to take off there's a light jerk. The transmission is not leaking. Do you think i need to replace the fuel filter? I'd appreciate your response.

@2carpros

10 жыл бұрын

How many miles are on your vehicle?

@ivanm5343

2 жыл бұрын

Mine does the same 218k

@Kyle-ck1sh

2 жыл бұрын

Could be u- joints. Mine was jerking and I had 2 bad u joints and it went away when I replaced them

@alanpalmer126

Жыл бұрын

Possible the TPS sensor is going out and hasn't tripped the check engine light yet.

Don't need a jack. I crawled underneath mine and changed it in 10 min. Done!

@2carpros

4 жыл бұрын

Awesome! Thanks for watching!

@Christina-fu5fn

Жыл бұрын

But how do u drain the gas that's in the tank

ok I have a 4.3 l 2005 Chevy 1500 silverado standard cab not extended I've looked for the fuel filter can not find it. I've looked in the frame underneath the driver side door but no luck I did also read that you said some trucks don't have one does mine not have one for this specific model ?

@2carpros

7 жыл бұрын

When in doubt, trace a fuel line from the engine backwards or from the tank forward in order to locate the filter. Sometimes they can be located in the engine compartment GM is weird with that sometimes.

What size wrenches do you need?

What size wrench do u use?

You can blow thru it in the direct of the arrow to see if its clogged..

What are the wrench sizes ?????

Great, this video shows how to loosen and tighten the fuel filter. No details required eh?

@2carpros

7 жыл бұрын

Not really, thank you for watching!

@nkr3637

7 жыл бұрын

How about wrench size? De-pressurizing the system?

@anthonyrobinson704

7 жыл бұрын

13/16" is the closest fit. Surest way to depressurize is to start the engine and then pull the fuse controlling the fuel pump (then shut off the engine and replace the fuse) some also unscrew their gas cap.

@joeessid5616

6 жыл бұрын

I suppose he could have added a "don't smoke or use a propane torch" but otherwise, it helped me see that it's a doable job.

@ezye361slezzyne8

6 жыл бұрын

If you need more details than this maybe you should have a mechanic do it for you.

under the rear driver seat !

@MaudsValentine

3 жыл бұрын

Bless you dawg 💯💯💯

@midevilgrim3

3 жыл бұрын

Thank you for this bro.

@BIGWHIT76

3 жыл бұрын

Literally my first thought was where in the heck is this at?

wouldn't it help if you showed your viewers where the fuel filter is located ? Which would be located just behind the frame rail by the front driver side door.

Where is the filter located? I tried looking for it when replacing the fuel lines in my truck, but it's not even connected to a fuel filter. Could it be possible that it's on top of the gas tank?

@tessiemcdonell188

8 жыл бұрын

+DJ Overspin Hi, it s/b located underneath your truck near the fuel tank.

@DJOverspin

8 жыл бұрын

rob donell I found out that some 04 chevy silverado's have the fuel filter built into the gas tank connected to the fuel pump. That is why I didn't see it.

@2carpros

8 жыл бұрын

+DJ Overspin On some trucks the fuel filter is located in the fuel tank.

@DJOverspin

8 жыл бұрын

2CarPros yeah, I was able to do google research on it and found out that it is built into the tanks which is better.

@davidbrown9390

8 жыл бұрын

+DJ Overspin For models built prior to 2000 the filter is under the driver's side door. Crawl under the door and look to the inside of the frame and you will see an inline filter. If the truck is a 4-door it is under the rear door on the driver's side. They are easy to get to. As for wrenches, I just use a 16mm and an adjustable wrench. Just squeeze your nuts real tight with the adjustable wrench and hope for the best. This always gets the job done for me. For pricing a fuel filter for a 96' Silverado I called 3 store chains. Here's what I was quoted: Advanced Auto Parts=$13, Auto Zone=$7.88, O'Reilly= $9.99.

what size wrenches are those?

@michael-anthonywatchdog3818

6 жыл бұрын

Exactly! Are they Metric or SAE standard? Where is the pipe wrench he was talking about where do you use that?

@EP1CNELSON

5 жыл бұрын

@@michael-anthonywatchdog3818 im pretty sure he meant a flare nut wrench

@YfelTheRealEmeraldKing

5 жыл бұрын

exactly no point in making this video if u arent going to list the tools needed

@alfredbotfield3313

4 жыл бұрын

My 2003 Sierra 4.8 takes 5/8 line wrench and 13/16 on the filter. However, the new filter I bought for it is 19mm!

What size wrenches were you using?

@JahinIinI

4 жыл бұрын

Right??!! Why leave out that detail? I’d like to get one wrench, maybe two, not a set, and not crawl under there twice since it hurts to do so...

@LionsSB-2024

2 жыл бұрын

13/16&5/8

Good video explains good tank amigo

@2carpros

3 жыл бұрын

Thanks for watching!

Where is located fuel filter for chevy silverado 2007 classic body ? It's not under driver , i followed gas line and didn't found it

@2carpros

6 жыл бұрын

If it isn't anywhere on the fuel lines, it is most likely in the tank. Thanks for watching!

What direction does the arrow face towards the end of the truck or towards the front of the truck

@MRCRUZER19

Жыл бұрын

point the arrow towards the engine. The fuel is flowing from the tank to the engine.

@Moco925

4 ай бұрын

So is out facing the rear of the truck?

Is it true that you should disconnect the negative side of your battery and unplug the fuse to the fuel filter/pump?

@joekool79

Жыл бұрын

That would be a wise decision.

@2carpros

Жыл бұрын

You can but you can also just leave the key out of the ignition entirely and it's the same effect in this instance. Thanks for watching!

Which way should the arrow on the filter itself be pointed? Does it point towards front facing the motor or towards the rear of truck?

@MatsuoDes

5 жыл бұрын

flow goes towards the engine.

@blainwilson7937

5 жыл бұрын

David u idiot.😂

Does anyone know how to fix (flashing engine) light 2000 Silverado misfiring engine?

@2carpros

7 жыл бұрын

Here is a great video that will hopefully help you in diagnosing your engine misfire. kzread.info/dash/bejne/qIGrttyOgrq-nc4.html Thank you so much for watching!

It would be nice if you told where the filter is located and which direction the arrow is supposed to point.

@2carpros

3 ай бұрын

Under the driver's seat inside the frame rail. The arrow is on the filter. Thanks for watching!

@Michaelfatman-xo7gv

2 ай бұрын

Common sense...fuel tank is where.....engine is where? Think it through.

@lindalealphamale

3 күн бұрын

@@Michaelfatman-xo7gv A more helpful way to state it is, “the arrow should point to the front of the truck.”

The title is wrong,i have a silverado 2004 5.3L and the fuel filter is in the gas tank and part of the fuel pump module.Supposed to be a lifetime fuel filter...

@gunzmith29r

9 жыл бұрын

obscur156 yeah they changed in 2003

@akbychoice

8 жыл бұрын

Lifetime, when it plugs up its life is over

@obscur156

8 жыл бұрын

My silverado 2004 has 320.000 KM with OE fuel pump filter and still runs great !

@cleverkitsune4302

6 жыл бұрын

Chuck that filter and install an in line before it blows yourpump

Must be nice to have a lift, that's what I want when I grow up.

Relieve fuel pressure first!

very good and helpful.

@2carpros

9 жыл бұрын

+Marcus Robinson Thank you for watching, please subscribe if you have not already.

Wrench sizes would have been very helpful.

@lexhawkins7442

6 ай бұрын

That's what I was thinking, as well as the location of the filter. And, he mentions the flow arrow, but doesn't tell us if the arrow points toward the tank or away. Far too many assumptions.

excuse me i cant find my gasoline filter in my 2005 chevy silverado, can any one help me please?

@tomificationable

9 жыл бұрын

A little way behind cab on drivers side. Next to frame. Looks exactly like this does on video.

@2carpros

8 жыл бұрын

They do not have one for 2005 its in the tank which doesn't need to be replaced.

I'm doing mine tomorrow, unhook battery, pull relay fuse, open gas cap, then I should be good to go, hope I'm not missing anything 🤞🤞 🤞

@gnartalk

Жыл бұрын

How’d it go? Doing my 6.0 vortec soon

where exactly is is the fuel filter in a 2006 silverado we can not find it

@2carpros

8 жыл бұрын

Some trucks do no have one

I ran some sea foam through my Silverdildo, it bogs in acceleration, Im assuming its a 21 year old fuel filter full of crud, to my knowledge ita never been replaced. Gonna do the ole take the gas cap off, remove fuel pump relay, give it a few cranks

@2carpros

Жыл бұрын

I'd give it a shot! Thanks for watching!

do you know where its located i cant find it on my truck

@2carpros

8 жыл бұрын

+Chris johnson What year is your truck?

@dashing57prz

8 жыл бұрын

+2CarPros a 2005 chevy silverado 1500 V6 engine

@2carpros

8 жыл бұрын

+Chris johnson Look along the frame rails where the fuel line is located if you can't find it there it is located in the tank and is non serviceable.

hopefully next video you'll show where to locate it

@2carpros

8 жыл бұрын

It is on the frame rail under by the drivers door.

@ruben9106

5 жыл бұрын

But not on mine I see the fuel lines but no filter

I have a 99 chevy Silverado with a 1500 it wont start I never changed this out could this be the reason it wont start please let me know thanx

@blainwilson7937

5 жыл бұрын

@beastking55 Did you ever find out why it wouldn't start?

@beastking55

4 жыл бұрын

@@blainwilson7937 yes that was the reason

@ISEEORBS

3 жыл бұрын

@Sasquatch Workshop 😂

@ISEEORBS

3 жыл бұрын

A 1500 you say eh

@beastking55

3 жыл бұрын

@@blainwilson7937 this was the reason

I have 2000 1500 and the torsion bar is in the way to move wrenches, does the torsion bar need to be removed???

@Christina-fu5fn

Жыл бұрын

To remove the fuel filter seriously I'm a female and I know the answer to that heck no du

What size of wrenches

Would have been nice if it had shown where the hell the filter is located!

@youigit5190

4 жыл бұрын

craig horton should be on the driver side along the frame

@chorton38305

4 жыл бұрын

@@youigit5190 Thank you.

how often fuel filter should ne changed on silverado ?

@jedidiah4004

6 жыл бұрын

Ali Saleh with every oil change for ideal preventative care

@bobbywomack8262

6 жыл бұрын

Every 7500 miles. That's what the Haynes manual recommendations.

@JahinIinI

4 жыл бұрын

Every oil change sounds a little extreme

@iSwanqa

3 жыл бұрын

Every time you get gas

@alisaleh2509

3 жыл бұрын

@@iSwanqa thANks will do that

Pipe wrenches !?!? Yeah , good luck with those! I recommend box/open ended wrenches for this.

@pcxdrone

4 жыл бұрын

Yes pipe wrenches. They are used for aluminum and other soft metals. Go ahead and use your steel wrenches. When you strip it out you'll go buy some pipe wrenches.

@andybub45

2 жыл бұрын

@@pcxdrone both of you are wrong. You use line wrenches.

What size wrenches are they?

@2carpros

8 жыл бұрын

5/8 or 16mm

@JahinIinI

4 жыл бұрын

Two year lag in response lol. Maybe put the wrench size in the description i had to scroll forever to find it

Did you disconnect the fuel pump or remove the fuse/relay?

@2carpros

7 жыл бұрын

You could or even just disconnect the battery or don't stick the key in the ignition.

What would indicate that I would need a fuel filter changed out? My truck is running rich and misfiring but I'm not sure maybe it's the pump. I have a new MAF, plugs, wires, fuel injection, cats, but still getting random misfire code.

@shakka65

6 жыл бұрын

Get a tune up

@natedawg88

2 жыл бұрын

Ever figure it out?

@JohnVC

2 жыл бұрын

@@natedawg88 No I ended up selling the truck really cheap but I assume it was probably the cylinders that was causing the misfire. I just hope it wasn't something cheap, like a bad sensor. 🤷‍♂️

@Christina-fu5fn

Жыл бұрын

Try ur spark plugs u might need a tune up

Thanks for posting! I hope to hell mine is this easy !!!!

@2carpros

8 жыл бұрын

it should be let us know if you have any problems

@davidferguson9814

3 жыл бұрын

If never been replaced and rusted up pretty good it can be a pain to get it off..I've had that problem before

Important to use a line wrench....proceeds to not use a line wrench on one side lol.

The flow which the arrow points is toward the front of the vehicle, right?

@2carpros

3 жыл бұрын

Correct. Thanks for watching Jason!

well I changed out mine and boom the truck starts

What to do if rusted up?

@2carpros

8 жыл бұрын

use wd40 to help loosen it

@kevinl8382

5 жыл бұрын

Ask the lines politely to play nice

@JahinIinI

4 жыл бұрын

Wd40 is crap. Use PB blaster

@mikey4016

3 жыл бұрын

@@JahinIinI I agree that WD-40 is terrible, but PB Blaster is only a tiny bit better, Howes Lubricator penetrating oil or Sea Foam Deep Creep are the best I've found.

Is there a correct way to cut off the fuel supply?

@2carpros

9 жыл бұрын

You could use a pair of small vice grips on the lines but still a small amount a fluid would come out between the grips and the end of the hose. You can also use a small bolt to shove in the end of the fuel hose after you disconnect it from the filter... Just have to be quick!

@gunzmith29r

9 жыл бұрын

Erin Mason take off your gass cap before loosing the lines get aa piece of rubber fuel line or big vacumn line hose hose and shove over both ends

@SKANK_HUNT49

8 жыл бұрын

pull fuse

@alfredbotfield3313

4 жыл бұрын

My fuel keeps leaking for 10 minutes after taking 1 side of filter off. Did the fuel pump relay, opened gas cap and even relieved pressure at intake Schrader valve! I'll have to try pinching fuel hose near tank.

The video could be a lot helpful if you would show where the filter located...

@2carpros

8 жыл бұрын

+Marat Delakryua is it on the frame rail below the driver seat right behind the transmission.

@MariaRodriguez-xq4bk

5 жыл бұрын

Just go under the truck and open your eyes that that shouldn't be that hard lol😂😂

How can some of these people want to fix their own car but can't handle locating the gas tank and following the lines up to motor until you see the filter.... like come on man, use some investigative skills.

@fooooodiwe

7 жыл бұрын

texasbmx246 eessssssss🐩🐩🐩🐩😈uuuuu&hjhjjjjuuuui

@Allcitycrewoo7

7 жыл бұрын

texasbmx246 @

@JahinIinI

4 жыл бұрын

Some of us hurt too much to waste time on that when it would take 3 seconds in the video, but several minutes of each of our time to search, dig?

This comment section is freaking hilarious. And 95% of the questions are many many multiple repeats repeats . Crazy.

@2carpros

3 жыл бұрын

Yeah, no one can read. Thanks for watching!

A fuel filter for a 2002 Chevy Silverado isn't 7 and some change its now 16 n some change

I have an 03 Chevy Silverado and the fuel filter is on the drivers side

@2carpros

2 жыл бұрын

Yep.

what size line wrench

@2carpros

8 жыл бұрын

5/8 or 16mm

@SKANK_HUNT49

8 жыл бұрын

Finally two and a half months later I can finish that thank you

@2carpros

8 жыл бұрын

Sorry about the delay, I must have missed it

@SKANK_HUNT49

8 жыл бұрын

Lol it's cool 😄 was just kidding

which way is the arrow supposed to point ?

@2carpros

7 жыл бұрын

T'ward the front of the vehicle.

@xjimmyxx1975

7 жыл бұрын

2CarPros thank you very much.

@2carpros

7 жыл бұрын

Thank you for watching!

@xjimmyxx1975

7 жыл бұрын

2CarPros no problem the video helped

it's alot easier taking it off than putting it back on, I just cussed that filter the fuck out

we looked under the hood and under neath the truck and didnt see it

@2carpros

8 жыл бұрын

+catto it should be along the frame rail on the drivers side

I think my fittings are leaking.

The owner's manual says to replace the fuel filter every 30,000 miles which is absurd. My 2001 Silverado has 125,000 miles and I've only replaced the fuel filter once at 60K.

@huskybrushape

5 жыл бұрын

John My 2005 GMC has 180,000 on it, filter has never been replaced, I’m getting ready to do it though I’m sure it needs it by now you would think.

@rudyromero552

Жыл бұрын

28 years no change

He probably did that already

Can’t remove filter bc the nuts are corroded

You forgot shut of fuel pump?

yes if you have a pit its easy. if you don't its extremely hard just because you can't get any leverage on the wrenches. its all right there 6 inches from your face. and if you have a 3/4 ton ...sigh the filter is covered by that big ass cross brace.

@2carpros

4 жыл бұрын

You might need very tall 12 ton jack stands and a tall jack. Thanks for watching!

@thelaughingman79

4 жыл бұрын

@@2carpros i subscribed just so i can unsubscribe. thanks for the valuable advice lol

What size wrenches?

@2carpros

8 жыл бұрын

5/8 or 16 mm line wrench

@jesscast5122

8 жыл бұрын

""Flare Nut" wrench dude!!!

why pipe wrenches??

@jcase19

8 жыл бұрын

Line wrenches

@jesscast5122

8 жыл бұрын

"Flare nut" wrenches

@JahinIinI

4 жыл бұрын

But why??

@ethans6.0

3 жыл бұрын

because then you won’t be able to get the nuts off of u round them

@ethans6.0

3 жыл бұрын

also i just read some else’s comment to a similar thread ... it seems most tools are steal and line wrenches or these pipe wrenches are made of soft aluminum to prevent rounding

ممتاز

@2carpros

8 жыл бұрын

thank you!

@Juny_Bug88

6 жыл бұрын

Em th Ubuntu bun Loki tesepon

I’ll

I am a auto tech of 25 years and a 03 and up chevy pu. has a fuel filter inside the tank. sorry this video is incorrect.

@2carpros

8 жыл бұрын

Thanks for the comment we have made the correction

@sguegliamario

6 жыл бұрын

Tony Tucker you're wrong. I own an 03 and it's under driver side.

@ronrock9242

5 жыл бұрын

I just replaced mine located on the right side of the chassis below the driver. 2003

@alfredbotfield3313

4 жыл бұрын

I have an '03 Sierra and it's on the frame!

So I cut the line so no what

At 1:40 u look like u struggling

Actually it would be really nice if the first thing you did was tell me where the f*** it is

@kimberlyjean7911

Ай бұрын

On the inside of the frame, drivers side of the cab…

You should depressed the fuel system first... fuel spearing in the eye 👁️👁️👀👀👀 cause blindness ahhhhhh 🙈🙉🙊🐝🍯🤥🤔👁️👁️👀👀👀👀👀

@2carpros

Жыл бұрын

Always wear safety glasses when working on a fuel system. Taking the line off is relieving the system of pressure. Helps get the line off too. Thanks for watching!

Sorry, but this is not a good video. You don't show us where the filter is located in relation to anything, you don't provide us with the wrench sizes and you don't tell us if the flow arrow is point to or from the gas tank. Far too many assumptions for a tutorial. Thumbs down.

Worsed video. Are u scared to talk or what? U dont give no details. Arent u suppose to unplug the battery and gas it before u crank it

@2carpros

6 жыл бұрын

Hardly the worst video. This is just my voice. No you aren't. Thanks for watching!

Omg so slow n boring