At last, a video showing the mysterious "button" I keep seeing everyone talking about. Thanks!

I've done that a bunch of times on the truck if your careful you won't lose parts. I took out a #30. And put In a #7 plus I stretched out the governor spring. When I finished blow smoke every gear change, no load engine RPM 2450. Fuel mileage went from 5.8 to 6.25 running at 62-65 MPH when coming to a hill ease fuel pedal to floor many times topped hills I would had to down shift once, never had to after the easy tune up . Better throttle response and fuel mileage great combination Oh, at 62-65 MPH RPM was around 1700 RPM

@213eddy

2 жыл бұрын

Did you mean 7 or 27 because I want to order that same button you did I have down shift as I go up a hill and would like to roll coal

@213eddy

2 жыл бұрын

Also what does it mean the higher the number what does it do as opposed to the lower number like a double 0

@stevenowen4150

Жыл бұрын

Blowing black smoke means ya over fuelling the motor, how could you get better fuel milage🤷🏻‍♂️. You have have upped ya fuel pressure considerably changing from a #30 to a #7(didnt know they made a #7🤷🏻‍♂️) Shouldnt change by more than 5 at a time. 30-25, 25-20, 20-15 etc. I hope hour camshaft can handle the extra pressure. And id watch that pyrometer like a hawk. Melted pistons dont do motors much good.

I have never taken a pump off to change a button, in your video you turned the pump horizontal (like it would be in the truck) to pull the button out anyway. Literally a 10 minute job on the truck. Thanks for the video's

@MVPartStore

6 жыл бұрын

Absolutely correct. Just a lot easier to make a video on the bench.

awesome video,,just what I needed. thanks

... I use a loooooong time ago in my KW 350 BC 14 spd .. #18 ... and was great in everything ... special in the mountains with heavy loaded ...... Cheers .

@arguswil

6 жыл бұрын

mco zpda thank you !

greetings, just came across this video and all though this is an old video. I wanted to pass something along. the "button " is actually" for how much fuel gets by-passed back to the tank.and limits how much fuel the pump receives. andyes the #stamped on the button relates to the size of the hole. the actual name is called " the fuel by-pass disc" enjoyed the video.

I really appreciate this Video.... thanks so much

We used to call the snap ring the “Jesus clip”, because that was usually the first word out of your mouth when you dropped it in a dark gravel truck stop parking lot trying to swap out buttons and shims lol. Excellent video sir!

Ive been in the military 22 years done a ton of years the 30 button is the smallest a zero is the biggest you cant find zeros a five is easily buyable if you know a good machinist they can make a double aught but these military nhc-250 engines have all three the smallest three power building components upgrading the button will help but the engine is still castrated 855 engines make power in three areas. 1 the fuel pump orifice they vary from 1/4 up to 1 1/4. 2 the button and three the nozzle of the injectors

thanks so much for the information i will try that on my pump

“And I’m not even going to play around with these shims” as he preceded to play around with the shims.

There really isnt much info on some of the old stuff like this, glad you put one up. What do you reload? I have a reloading room too. I have dies for 87 different cartridges currently, probably adding another with a 7.5x55. One of only a couple of milsurps I dont have but I'm bidding on both a 96/11 and a k31.

Hi good day. I have a question. Can you dissasemble a pt pump and dont let a calibrator calibrate the pump? Implaning to change the front oil seal. And dont want to go to the calibrator shop

#20 will wake up that motor I took out a 40 from mine and a 20 made her pull nice

So did you notice any difference once you swap out the button ? Which one did your truck have and which button did you install ?

Hello good day .. consultation . I have a cummins generator with a pump of the type pt . the problem is when they run out of oil ... or makes a service ... take a long par make it take fuel .. where should purge ... loosen sections of the exit nozzle fill the pump drawing ... the alen this up .. etc ... which is not logical or actual method for doing this procedure. Hernan greetings .

I would live to know what number you used, where you got it and your opinion about power, MPG and EGTs. Thinking of doing it myself but MPG is more important than HP for me. (edit just saw where you say #20)

@MVPartStore

8 жыл бұрын

+NelsonStudios I plan to change that to a 12. Currently I buy them on eBay but not that I have my own parts website I'm hoping to make them available as well. My EGT's hover around 900 when cruising on the freeway at 60 to 65. If I encounter a substantial hill and I'm pulling my M989 HEMAT trailer I will hit 1250 and then start to back out of it. I'm not sure about actual horse power gains as this is such a heavy vehicle to begin with. Pittsburgh Power claims the dual fuel line modification alone increases 25 horse. I do believe this is a needed mod with the dual fuel line for the extra volume needed to maintain stock pressures. Some one much smarter than me could explain the hydraulics law of pressure vs volume. On a side note I do believe that you and I need to exchange some contact info as we both seem to gain a lot from each others videos. Plus I think we can help each other out on some of the projects if we were to collaborate. please feel free to email me anytime, or anyone who has questions can. Ken@MVPartStore.com. And be sure to visit the website at www.MVPartStore.com

@acme663ryo

8 жыл бұрын

I contacted you through the store.

@OC45573

8 жыл бұрын

+WoodWorking With ADD Did you change to the #12 fuel button yet?

@MVPartStore

8 жыл бұрын

+OC45573 Not as of yet. The truck will be on the road for the first time since November today if all goes well so it'll be a while yet.

@MVPartStore

7 жыл бұрын

Not yet. Haven't had much time.

Now, who removed breakoff bolts with the pump still on the enging?

Does the non AFC have a idle adjustment screw n same spot 🪛

Bring us a video that is measuring between big cam crankshaft and Nissan diesel v 10

Is the governor plunger supposed be removed freely? Mine is completely seized. The coupler was broken and the tee that spins the plunger is sheared off.

@MVPartStore

8 жыл бұрын

+Samual Krokson Sounds like you may need a new pump. Wish I had a spare to share.

@biglovesam

8 жыл бұрын

+WoodWorking With ADD I'll tear it down more and try to get it out then I'll have to find parts, spare parts would be great not much on ebay

I took my pt fuel pump off its off of a 855 350 big cam Cummins when I put it back on the truck start good but after a min the truck start to rev up really high and it won’t come down what could I do to fix it

what about changing the governor spring for a more stiffer spring.

@speedandmarine9066

4 жыл бұрын

That's what the shim pack under the retainer is for. Add shims to increase RPM, take shims out to reduce RPM.

ran a nta 370 with 345 lbs rail ps and a 7 button had to put on a bigger turbo but that keep those 1693 's behind me

So what does the button do if I get a #40 or #7 what do they

Is a PT pump on an L10 the same? My '93 L10 is 280 hp, and I would like to bring it up to maybe 310. I don't want to get too crazy with it. Thanks.

@MVPartStore

6 жыл бұрын

I honestly can't answer that. I will try to research it and let you know.

@braydenmalaske8194

5 жыл бұрын

You can hit 310 with it pretty easy. We had one that we cranked up and put bigger injectors in that was about 400 and it didn’t last long so we went back down to about 330

hello, please tell me how to increase the power of my motor and what to substitute in it to get 500 hp . Nta855 315hp

They sell a special curved wrench to access that rear bolt on the fuel pump

@colestroud8300

Жыл бұрын

That wrench is actually for the air compressor. It's not needed on the fuel pump

If I just want to adjust the idle.. does the fuel stop after taking off that plug? And how do I bleed the system?

@speedandmarine9066

4 жыл бұрын

There will still be fuel in the lines, heads and injectors. Fire it up and hold the RPM up a little and normally it'll pull enough fuel to self bleed pretty quick. If you have a questionable fuel system you'll have to crank on it a little while. You don't need to pull the entire governor cover to adjust idle, just the plug at the back. Cummins has a special tool to adjust the idle while the engine is running to avoid the adjust/start/bleed/readjust game.

@jameshickey9393

4 жыл бұрын

@@speedandmarine9066 I think 3/4 turn right increases idle 100rpm, turn left decreases idle 100rpm. Slightly back off after turning 3/4 turn.

@speedandmarine9066

4 жыл бұрын

@@jameshickey9393 How much the idle screw affects idle RPM depends on a lot of factors. No need to back off after adjusting if you use the correct method. If you don't have the special tool and are pulling the plug to adjust with a normal screw driver you need to run the engine long enough to purge the pump housing and stabilize the idle on a hot engine to see if you need further adjustment

With what purpose do I perform this operation so that it serves me

@robtay351

4 жыл бұрын

more fuel

What are you reloading for

@MVPartStore

5 жыл бұрын

I reload 30-06, 5.56, .40, 9mm, and some .30 carbine.

You sound like jeff daniels lol

I was told that if I put a number 5 button in my big cam 4 it can burn up my pistons do you know if the change of the button will burn up the piston....

@MVPartStore

4 жыл бұрын

Run a pyro for sure. You will be adding a lot more fuel which creates heat, the heat is what could burn a piston.

@adrian201236

4 жыл бұрын

So what button would you recommend for additional power without changing turbo. My big cam is rated at 315hp .. i just need to boost to 375hp or 400hp just to help with the weight. I don't really want to change the governor 75mph is good but my truck struggles a bit on hills...

@travislee4704

3 жыл бұрын

You can definitely cook the pistons with a 7 a good number is 15 no lower then 12 and dont lug

@adriancunningham6772

3 жыл бұрын

@@travislee4704I change from a number 25 to a 15 I notice the difference I am planning on lowering to a number 10 what else can I do to increase the power.

@travislee4704

3 жыл бұрын

@@adriancunningham6772 I wouldnt mash it all the time because a 10 is too much fuel. Wong last 300k miles

I replaced 3 new pt pump for cummmins KTA50-G3 the generator will be hunting When i swap used pump from another generator no hunting

Put a 5 in and back that throttle shaft out about 8 rounds be good to go

@Mark_Tschetter

Ай бұрын

Any estimate how much HP that would add?

I learned nothing 🤦🏻‍♂️