I was surprised to see my callsign (K3MR) come up in the demonstration.
@mikec64473 жыл бұрын
Best run-through I’ve seen. Thank you
@digitalanaloguehamradio
3 жыл бұрын
Thanks mate I need to do a more in depth video soon
@andyabbo90005 жыл бұрын
Than you Chris nice video and very informative, Ive been playing with mine and setup APRS this evening. My thoughts are this is a fantastic radio and a nice addition with my anytone and kenwood 74. Great stuff and keep them coming.
@johnmagee23942 жыл бұрын
Thankyou for posting this Video very Informative Chris stay safe John W4GLX
@digitalanaloguehamradio
2 жыл бұрын
Thanks for watching John
@off-trailseeking39654 жыл бұрын
Nice demo. Keep up the good work with the Yeasu FT3 setup vids! Thanks.
@bilkoprince42224 жыл бұрын
Really want this radio. Xmas is coming.
@danielmorrison7579 Жыл бұрын
Does anyone know what the little switch located just under the data USB connector is for? It is a PCB mounted switch that has three positions. I can't find any reference in any of the manuals.
@digitalanaloguehamradio
Жыл бұрын
I don't know but I'm looking into it
@danielmorrison7579
Жыл бұрын
@@digitalanaloguehamradio If you find out what it is for, let me know.
@AngelVillaG
Жыл бұрын
It's for firmware update
@danielmorrison7579
Жыл бұрын
@@AngelVillaG Thank you. Makes perfect sense.
@matsanisakrim55033 жыл бұрын
Please you can guidence for rt/tx frequency digital at 350-400 mhz FT 3 D.
@chuck40504 жыл бұрын
Just the video I was looking for , great help!!
@HamTechRadioScannerDrones4 жыл бұрын
excellent
@johnk80915 жыл бұрын
It appears that the side rubber flaps do not click back into place easily. I watched your first video, and saw you trying to close the flaps - unsuccessfully, although you didn't mention it ? I see in this video the same thing happening - see you pushing your thumb against the rubber flap, and it pops out again. That would be very frustrating for me
@digitalanaloguehamradio
5 жыл бұрын
I never noticed it was hard to push. I left them out because I was told it improves audio quality thanks for watching
@johnbauman40053 жыл бұрын
Is it possible to toggle GPS on/off?
@BuShMaStEr08105 жыл бұрын
Can i Change de Mode from FM to NFM. Many Repeaters are working in NFM. Thanks for a Info. 73 de HB9FZE, Stefan
@kevinokeefe77964 жыл бұрын
so when you set up a fusion repeater do you set it up the same way then hit the wires x to connect. That is where im confused Or could you show a video connecting to wires x strait from the radio to an outside repeater not a home node Any help appreciated
@digitalanaloguehamradio
4 жыл бұрын
Kevin OKeefe I don’t have the radio anymore. But you would have the repeater frequency input and output set correctly on the radio. And you would press the wires x button from memory And navigate to the room you wish
@kevinokeefe7796
4 жыл бұрын
2E0UKH Digital Analogue Ham did you like the rig I’m not overly excited about mine
@digitalanaloguehamradio
4 жыл бұрын
Kevin OKeefe I returned the radio I did not like it I thought the audio was very flat and thin. I could not stand listening to it
@o00scorpion00o
4 жыл бұрын
@@digitalanaloguehamradio what radio did you get and is the audio better ?
@digitalanaloguehamradio
4 жыл бұрын
o00scorpion00o I’ve actually bought it again and changed my mind it’s great.Audio is not brilliant but acceptable when you remove the rubber grommets on the side that protects the power connector. Just be aware it’s not water resistant if you do that
Пікірлер: 35
I was surprised to see my callsign (K3MR) come up in the demonstration.
Best run-through I’ve seen. Thank you
@digitalanaloguehamradio
3 жыл бұрын
Thanks mate I need to do a more in depth video soon
Than you Chris nice video and very informative, Ive been playing with mine and setup APRS this evening. My thoughts are this is a fantastic radio and a nice addition with my anytone and kenwood 74. Great stuff and keep them coming.
Thankyou for posting this Video very Informative Chris stay safe John W4GLX
@digitalanaloguehamradio
2 жыл бұрын
Thanks for watching John
Nice demo. Keep up the good work with the Yeasu FT3 setup vids! Thanks.
Really want this radio. Xmas is coming.
Does anyone know what the little switch located just under the data USB connector is for? It is a PCB mounted switch that has three positions. I can't find any reference in any of the manuals.
@digitalanaloguehamradio
Жыл бұрын
I don't know but I'm looking into it
@danielmorrison7579
Жыл бұрын
@@digitalanaloguehamradio If you find out what it is for, let me know.
@AngelVillaG
Жыл бұрын
It's for firmware update
@danielmorrison7579
Жыл бұрын
@@AngelVillaG Thank you. Makes perfect sense.
Please you can guidence for rt/tx frequency digital at 350-400 mhz FT 3 D.
Just the video I was looking for , great help!!
excellent
It appears that the side rubber flaps do not click back into place easily. I watched your first video, and saw you trying to close the flaps - unsuccessfully, although you didn't mention it ? I see in this video the same thing happening - see you pushing your thumb against the rubber flap, and it pops out again. That would be very frustrating for me
@digitalanaloguehamradio
5 жыл бұрын
I never noticed it was hard to push. I left them out because I was told it improves audio quality thanks for watching
Is it possible to toggle GPS on/off?
Can i Change de Mode from FM to NFM. Many Repeaters are working in NFM. Thanks for a Info. 73 de HB9FZE, Stefan
so when you set up a fusion repeater do you set it up the same way then hit the wires x to connect. That is where im confused Or could you show a video connecting to wires x strait from the radio to an outside repeater not a home node Any help appreciated
@digitalanaloguehamradio
4 жыл бұрын
Kevin OKeefe I don’t have the radio anymore. But you would have the repeater frequency input and output set correctly on the radio. And you would press the wires x button from memory And navigate to the room you wish
@kevinokeefe7796
4 жыл бұрын
2E0UKH Digital Analogue Ham did you like the rig I’m not overly excited about mine
@digitalanaloguehamradio
4 жыл бұрын
Kevin OKeefe I returned the radio I did not like it I thought the audio was very flat and thin. I could not stand listening to it
@o00scorpion00o
4 жыл бұрын
@@digitalanaloguehamradio what radio did you get and is the audio better ?
@digitalanaloguehamradio
4 жыл бұрын
o00scorpion00o I’ve actually bought it again and changed my mind it’s great.Audio is not brilliant but acceptable when you remove the rubber grommets on the side that protects the power connector. Just be aware it’s not water resistant if you do that
Menu tweaking is the name of the game. Thanks!
Must get one good radio
What is this a 2 meter 440 radio. Or digital
@digitalanaloguehamradio
5 жыл бұрын
BUDDY 2 and 70 Analogue and digital