"this game is so violent", but he was the one who killed all the innocent people on the street. 🤣

@MobileDecay

5 ай бұрын

The game made him do it! 😂

Don: commits a massacre Also Don: this game is so violent

So where is the instruction? where are the links? Whats the point of this video you showng it but not telling how to use it?

It felt like less than 60fps because the frame times were all over the place. You can see it with the green line on the top bar. Digital foundry found this with even native FSR3 implementations

have u tried overclocked and undervolted?

Great video!!

This is really cool, I'll have to try it. I see some people saying it will suck because of the ghosting and input lag. While I do agree there, especially that the input lag will remain like 30, I still see this as beneficial in some cases. It might be better than raw 30 fps for some people. Plus I could see this being great when you have more frames but want to go over say 90hz with say the new OLED Deck. Very cool

Unrelated to the video itself, but is it true that you get no achievements if you activate the flags for skipping the intro and the launcher?

I like playing demanding games locked at 40fps/hz on the deck. could this be used to get a stable 40fps for the games let's say, drops to 30s occasionally like CP2077? could you maybe try that?

@denissmith7671

6 ай бұрын

Wouldn’t be worth it, the less framerate is, the more input lag would be

@socinety

6 ай бұрын

@@denissmith7671how much input lag are we talking about here? is it really that big of a deal for single player games?

@denissmith7671

6 ай бұрын

@@socinety around two times more since 2 frames are needed to generate a frame between them, and it depends ig, maybe for slow paced games it wouldn't be that big of a deal, but in something like cyberpunk it wouldn't feel good at such low framerate. Gotta keep in mind that frame gen doesn't increase the actual performance, it just increases the smoothness of "video output"

@deckverse

6 ай бұрын

Would work, but feel worse. Frame Generation needs a consistent baseline of at least 45FPS. Everything below that results in inevitable, terrible input latency.

@aviatedviewssound4798

6 ай бұрын

@@socinety Don't worry, game performance will improve when SteamOS 3.6 releases in March.

Steam deck oled can use it?afmf??😮

This is great. It has some downsides. Input lag is still the same, since the middle frame didn't get any new inputs. And if you are over 30 fps normally and under 60 fps in this, I'd probably use the over 30 fps, since you have more input lag than before.

@NovaspiritTech

6 ай бұрын

i know input lag is a issue but i didn't really experience this on my run but did notice it didn't quite feel like the FPS posted 60 fps didn't really feel like 60fps

@user-wf4gd6pi2j

6 ай бұрын

Delayed control, but the gameplay more More pleasant

@Cute_Maxi

6 ай бұрын

I think in some games it wont matter... for instance a game like Baldur's Gate 3 on Steam Deck would greatly benefit from frame generation since the slow, methodical nature of the game means that input lag wouldn't really be noticeable, whereas playing without it and dropping down the 17 fps in some areas is VERY noticeable. Just my two cents.....

@rodovanra6783

3 ай бұрын

for me the Witcher 3 is perfect with DLSS and FSR3 frame gen, I get about 90-100 fps with my 4070 super using both. If I do not use FSR3 and DLSS I get about 40-70 fps, yes I love RT and I want it to be maxed, and the 4070S is not fast enough without DLSS and some kind of framegen, but I get very little lag and no stuttering.

I find FSR3 is very good when using an FPS cap in Cyberpunk (set in the video settings of the game). I have the FPS cap at 30 fps, but frame gen then will generate up to 60. If you get a locked 30 fps cap, it feels great, and you see a locked 60 fps. Also saves power.

Framegen only good when you have more than 60fps base frame, like from 90fps increase to 165fps is very good

Question can you apply this for Baldur's Gate 3???

@zoltanschweifer4304

6 ай бұрын

You could make a lot of ppl happy and intrested.

@deckverse

6 ай бұрын

As of right now, Baldur's Gate 3 does not support framegen. However, FSR2FSR3 is possible, with barely noticeable improvements.

Maybe motion blur was causing the ghosting?

apparently the mod doesn't work in the full version of the game that comes with the Phantom Liberty DLC since I've tried it myself anyway and it doesn't work

@deckverse

6 ай бұрын

It works, but is not worth your time.

This really should've been a 60fps video so we could actually see the difference for ourselves, still appreciate vid though

Now in starfield its doesnt work?? Fsr or any fps generation?

This is truly a game changer

@tapsofosiris3110

6 ай бұрын

No it's not. The input lag so soooooo bad.

@aprozsolt8046

6 ай бұрын

Added input lag and FAKE frames ?

Take my like a sub sir

Bro, you are getting 20 fps, the ghosting is faint. I think the biggest drawback is frame times, it will get better, but you cannot create something out of nothing, just approximate as close as possible.

Using frame gen in immortals of aveum I had to lock the framerate or it didn't look like real 48fps

@marley_sr

6 ай бұрын

this game have problems with fsr 3, this mod feels much better. it's not native feel through, but it smooth thing up

With FSR3 frame gen my 4070 super becomes the graphics card i thought It was supposed to be. Witcher 3 1440p RT on and everything on ultra 80-90 fps with frame gen, cyberpunk the same about 70-90 fps with RT on max 1440p DLSS quality ( cant use DLSS frame gen on linux) So yeah with this mod my new GPU became what I thought it would be.

I can see with my own eyeballs that latency is NASTY. You push the stick and half a second later your view moves..... That's no bueno...

Kind of confusing, you say FSR but in settings you have DLSS ??? Isn't this NVIDIA's?

@NovaspiritTech

6 ай бұрын

i believe it's using dlss frame generation as a placeholder for fsr 3.0 since acutal FG for nvidia requires special hardware we don't have, i'm assuming his DLLS uses this just to active the option

@user-wf4gd6pi2j

6 ай бұрын

В настройках да название dlss, но он его подменяет , в некоторых играх кроме mode fsr 3.0 требуется ещё устанавливать файл fake gpu dlss

@lazyhominid

6 ай бұрын

When having installed FSR 3 it much be turned on in game. That's done by turning on DLSS. Then the game will use FSR. Yes, counterintuitive, but that's how it's done.

@pR0ManiacS

6 ай бұрын

There's a mod he uses.

for me none of fsr3 mods worked on SD and CP

its framegen. The input lag doesnt improve, 30fps to 60 with framegen still feels like 30 due to input lag.

👍🏿

to good to be true, just play longer. you will get flatline ( crash)

FSR Frame generation alone does not double fps..... you are using super resolution upscalling nd frame generation at same time

So u paid a random to use this ???

@MobileDecay

5 ай бұрын

Yeah, he was in a dark alley too.

That input lag is insane but at least it’s a thing I guess 😂

This isn't a game changer, it causes a lot of blur, tearing, false sensation of 60fps, is much better 30 true FPS than 60 fake fps. This is the true i've try it about 2 weeks.

As I lookin this vid It feels like you're playing a Cloud game with high input latency.

@NovaspiritTech

6 ай бұрын

actually that's a pretty good way to describe it

Hello

So no one else can say it, First

@NyneIX9

6 ай бұрын

You thieving bastard!

@JsjdjJhdjd

6 ай бұрын

First

@cartamarpharious

6 ай бұрын

@@JsjdjJhdjd damn, I got had. Lmao

@ricardofranco4114

6 ай бұрын

Sure did ​@@cartamarpharious

@cartamarpharious

6 ай бұрын

@@ricardofranco4114 hahahaha