Good work. Literally can’t find a Haynes manual for these yet.

I took my car to PEP boys in Lakewood CA, and they quoted me $780 to fix this. $500 just for the part. I looked up the parts ....cost $124 at autozone... fixed it myself. Plus $24 for PEP Boys front end inspection and it cost me all of $150. Car has 104,000 miles on it.

@LVtv27

2 жыл бұрын

How does it sound when the bearing is going bad because i think i have that problem now ?

@yushawan

2 жыл бұрын

@@LVtv27 ...car vibrates. Feels like a tire isn't balanced

@LVtv27

2 жыл бұрын

@@yushawan and you can feel it when you turn ? And also it’s loud when i crank the car up on a cold start

@yushawan

2 жыл бұрын

@@LVtv27 ...I'm not a mechanic, so unfortunately I wouldn't be able to help you with anything more than what I've told you.

To use the 36mm socket, if I don't have an air impact, can I use a battery impact?

I think that’s what’s wrong with mine I can barely hit a bump and the raddle noise drives me crazy is that a sign that it’s bad when it make that noise like somethings knocked Loose?

Did they not tighten the lugs correctly, or was the hub just bad... how many miles did the Car have

thanks for the video really helpful!

@Leekautorepair

7 жыл бұрын

Thanks for watching!!!!

Great vid man!

@Leekautorepair

6 жыл бұрын

Thanks for watching bro!

Good looking bro

Could you do a video of replacing a anti-bar bushing

Excellent video. Thanks man.

@Leekautorepair

2 жыл бұрын

👍🏽

No abs wire?

Thanks man - This video helped me get a start on my 14 Cherokee.. Very similar... Only difference is - 2 different bearing types ( offroad, non-offroad) The rest was on point.

I have the same year making a lot of noise, I'm pretty sure mines on the passenger side. Is it done the same way on the pasanger side?

@lrgkrew00

Жыл бұрын

In this video it seems like the driver side, but my front passenger side is starting to act weird.

Goodwork

Just had mines replace on my 2015 and now my abs, traction, engine and park brake light came on any clue on what could have went wrong ?

@KINGSL0THXXIII

4 жыл бұрын

Abs sensor could've been damaged during install of the hubs? I'd check there first!

I have a 2011 Chrysler the wheel bearing did not want to come out the actual was stuck in it as I was trying to get the ball joints out the axlel still would not come out but now the axle is broken so I had it towed to the shop

what size is that inverted torx for the caliper bolts?

@yamz7123

2 жыл бұрын

T 14 inverted

Thank you

Thanks!

I had the same problem and I changed it with the help of your vid and thank you but now having problems with abs and wheel sensor on the front driver side. Any fixes???

@cmackinahemi300c

4 жыл бұрын

Just get the sensor replaced I had 2 of them replaced so far.

@jesserodriguex1397

4 жыл бұрын

Have you been able to fix the issue I did this yesterday and similar problems came up.

En español: herramientas utilizadas herramientas básicas barra de palanca Vaso de tuerca de eje de 36 mm Torx invertido E14 Llave de 16 mm y 12 puntas (llave larga) Lanzador PB Vaso hexagonal pistola de impacto impacto eléctrico 3/8

@jonathang4773

Жыл бұрын

gracias

I have the same car in black and the front right hub got the same problem. Seems like it's a common one for this model yeah

@tylernewsome7656

5 жыл бұрын

JM C front right for me. Very loud rub.

It’s crazy this same thing happened to my Chrysler 200

@lrgkrew00

Жыл бұрын

What happened, did the wheel just fall off? I have a 2016 and my wheel started feeling weird. I've taken in to get looked at but everyone says there's nothing wrong but they do notice something is off

Should you replace both sides at the same time

@Leekautorepair

Жыл бұрын

Says who?

It’s it really a 36 mm for the axle nut or 32 mm?

@demitrisolvinski

10 ай бұрын

axle nut is 35.9mm, so 36mm socket is correct

Does the bearing rattle when its worm on this car also

@tylernewsome7656

5 жыл бұрын

T Jone Mine is just a loud rub

@trezzturbo2403

4 жыл бұрын

I think that’s a start of it 🤔 mines started with a rattle sound before it actually got bad bad

And don’t forget to buy e socket set not just the e14 socket you will need the e20 socket to removed the brake pads

THIS VIDEO HELPS IF YOU STRIP YOUR HUBS AS WELL UNDO THE AXLE NUT PUSH AXLE BACK UNDO THE 4 HUB BOLTS UNDO CALIPER BOLTS GRIND OR DRILL OUT OLD LUG BOLTS

Followed the method gor it done but now all kinds off dashboard lighta come on..help!

@Leekautorepair

5 жыл бұрын

Did u disconnect something?

@xmortale

5 жыл бұрын

@@Leekautorepair I didn't. The service transmission, service abs, service hand break and traction control lights are on

@xanthious22

5 жыл бұрын

@@xmortale abs not hooked up correctly this car did not have abs

No wheel studs on your new hub assembly?

@Leekautorepair

7 жыл бұрын

No. This is a ''studless'' hub assembly

@agray103

7 жыл бұрын

Leekautorepair are you able to put the wheel studs in after the rotor is on?

@Leekautorepair

7 жыл бұрын

Austin Gray Yes. The lug nuts are actually wheel studs

@agray103

7 жыл бұрын

Leekautorepair cool. I've never seen that style set up before.

@maleekade1875

3 жыл бұрын

It's your European design like like a Volvo

What bout the lug nuts???? u forgot to put them

My 99 Honda Accord 20 years with the same bearing and now 2020 starting to go bad that's quality

my axle nut is so stuck on there thanks to midas. its impossible to get off. already broke a breaker bar.

@Leekautorepair

2 жыл бұрын

Heat is your friend!

@Ky-vv8nj

2 жыл бұрын

@@Leekautorepair I'll have to try that. Wish me luck man.

Lol. Used a pneumatic wrench on axle nut and from what I see that only got to about 100 foot pounds not even close. He had to hammer the nut to make it stay because this is going to fly off thanks to him not torquing it correctly

Seems like these 200's have some serious suspension flaws from my experience. Such a young vehicle to have bearings going out already. Nice video though!

@scatx

4 жыл бұрын

Cheap car garbage that's why

@YakThaWiseman72

3 жыл бұрын

Agreed

@Ky-vv8nj

2 жыл бұрын

Just had a wheel bearing swapped out and it's already bad again after 1 month of driving. What a piece of crap car.

@Joseph-eh4rs

2 жыл бұрын

Chrysler 200 just badly engineered car.

@AFatherToTheFatherless

2 жыл бұрын

It's a Chrysler/dodge...did you expect any different?

Whats a job like this cost. nice job on repair

@MySHAQ18

6 жыл бұрын

Mark Anderson I think the dealer charges 300

@giralds2016

5 жыл бұрын

The mopar part is about 320.00,,, auto parts store about 100.00 same part. Parts+ labor can bump 500-600 at the dealer, I was happy to do it at home for the cost of the bearing and some beer

Wish I had the proper tools to do this.. My front left bearing just failed, again, for the 3rd time in under 2 years.. :(

@YakThaWiseman72

3 жыл бұрын

Wow

@MosesTheBearded

3 жыл бұрын

Odell Goodman-Bey my exact response.. Have a feeling another one is going to go out soon..

I just did the replacement on my 2016 Chrysler 200 and now I’m getting all the warning lights on the dash

@JaimeMorales-uh2de

6 жыл бұрын

Jose Lopez did you figure it out having same problem at the moment

@rortega121191

5 жыл бұрын

I’m having the same problem

@thatotheritguy

5 жыл бұрын

@@rortega121191 Did you find a resolution to that issue?

@meen318

5 жыл бұрын

I'm getting ready to do this. I don't want to have the same issue. Did this ever get resolved?

@thatotheritguy

5 жыл бұрын

@@meen318 My wheel hub assembly was supposed to come with a wheel speed sensor, but did not, so it didnt get replaced. I ordered one (www.rockauto.com/en/moreinfo.php?pk=10102908&cc=3310286&jsn=10) and it cleared not a professional, your mileage may vary, if it goes wrong, your on your own.

Did it sound like someone blowing into a glass bottle

BTW.. www.showmetheparts.com/timken/ to help reference torque specs when mounting the new assy if you dont have an FSM handy

Shiz, muthtruckers, hell yeah, fixing my shiz, muthtruckers. Great content, but maybe hold camera steady, and work on the language. Still better than I could though! Lol

Sexy car..but a pos in reliability

@lucasgeurden1621

5 жыл бұрын

I've had mine for 3 years and it's been perfect. It is the 3.6l with awd which I hear is better than the 2.4l FWD

@yumajosh3710

5 жыл бұрын

Mines the 3.6 awd also..put 45k on it last year alone and only replaced breaks and rotors. It's a great car

@kinginanorth

2 жыл бұрын

It is a very good car until you hit 100k range. Oil cooler is made of plastic and a total piece of crap. Get you an upgraded Dorman oil cooler and takes care of that. The wheel hub will go bad on most any car in time so that's just a thing period. Besides that it is pretty rock solid. That is besides the weak ass 8 gear transmission and its hard shifts.

Too much cussing

Can this be done without an E14 hex? Will a regular socket work?

@Leekautorepair

5 жыл бұрын

U can use a 12 point socket. Not sure of the size tho