Doors needing adjustment after 2mths of use. Why can’t they install things well anymore

Thank you for the video, it was a lifesaver. I followed your method & my door now shuts/opens perfectly with no catching or rubbing! & that's after weeks/months of fiddling, screwing & adjustments with no success...& lots of swearing 😂

Thank you so much just leveled my door 🎉

Thank you, very helpful

cheers for the advice.

Cheers pal 👍👍

What's the grub screw for between the 2 pips

Great vid!! Can i ask our door has a thumb lock instead of a handle which is a terrible design and stiff to turn. Our these the standard now?

It would be good to see a dismantled hinge to understand how it works. Our back door needs periodic re adjustment. Not sure if it is vibration altering the adjustment? Our front door hasn't needed any adjustment but isn't used as much.

When you adjust the Allen key on the underside of the hinge you only did the one, is that enough or are you supposed to do all three? Cheers.

When adjusting the hinge upwards like you've done with the bottom hinge, you should also do the same with the rest of the hinges. Otherwise the other hinges will be under pressure and will end up squeaking and eventually will fail

Thanks for the video and explanation. Does the same process apply to stable doors? i.e. those which are split top and bottom? Should they be treated as two seperate doors when it comes to adjustments? Thanks in advance.

perfect

It lifts the whole door ‘slab’ The gap will increase across the bottom evenly. The first method he used basically re - squares the slab in the frame. Stick a spirit level on the frame head and sill , then up the hinge side , see if it is plumb would be a good move as well.

Bottom hinge you said anticlockwise but turned clockwise.

@neilbanks6845

6 күн бұрын

Screw was upside down-thats why

Pips? Thought it was a cap.

When you say "it lifts the door" its not clear whether you mean the hinge side or the handle side

@Ineffable1111

8 ай бұрын

If you mean at the end where he lifts the door at the bottom underneath hinge. The whole door should slightly rise with this adjustment. But we are talking in millimetres.

You could do with knowing the difference between clockwise and anti-clockwise lad lol

@neilbanks6845

6 күн бұрын

The screw was upside down !! He was correct