It is a good day when you have the mail man leave a motion box!

Great video AZ! MotionRC/Freewing have really improved their game with the trailing link LG. I fly off grass and they're mandatory for grass. If we can get them to design without a FOD/Cheater vent on the belly, the world would be better. It doesn't take any time at all for the blades to get caked with debris flying off grass. I read about pebbles chipping blades from the guys that fly off paved or hard surfaces.

I am watching this video a year after you made, beautiful jet to add to my fleet 11 of mine are Efight and 1 arrows I'm only 2 years into rc flight and I'm having tons of fun, I like your build's & review's "no bull, I'd like to see this jet with some ordinance see ya in the sky 😎👍🛫

Ive tested foam tac and fix n flex. I mounted a servo to a test piece of foam from a broken wing. The foam tac dries faster but the fix n flex is a much better glue. It took a lot more force to remove from the foam than foam tac. and doesnt melt the foam. Foam tac definitely melts the foam a little. not desirable in my opinion. The fix n flex also doesnt harm the paint.

Those Lemons are Awesome I use them in everything, great looking plane.....👍🏼

@JoshWeaverRC

5 жыл бұрын

I may use one next time I need one. Especially as they can come with stablization. Hope you've been recovering from the move. I'm still unpacking but 95 percent. About 50 percent setup but functional workshop.

@ljhobbylife

5 жыл бұрын

RCWeaven FPV yeah man I’m recovered and set up garage real nice, you’ll get there soon. Lemons are the best I’ve used them in everything except the BNF’s from Horizon, lol.

Any flight footage coming? Great build video, you really got my attention. Really like the looks of this plane.

Already have an fms f-35, looks good, flies ok, but this one is bar none a keeper. Already placed mine on order, I'll keep you guys posted. Got many plans set aside for this gem.

Nice review love watching your channel 😀

Awesome video. This is such a great looking plane. Thanks for sharing.

Nice keep up the Good work

this is awesome and useful, thx for uploading!!

My right rear elevator rubbed also. You have to loosen the two screws and put a gap in there then re-tighten. Also on the rudder I was confused it said 25mm going each way. I just did mine a total of 25mm left + right.

@angryzeppelin2750

5 жыл бұрын

So likely a manufacturing problem overall.

@NMdesertracer

5 жыл бұрын

@@angryzeppelin2750 no i think theres a little wiggle room till you get it tightened up. Just put a credit card between the fuse and elv then tighten it up

@NMdesertracer

5 жыл бұрын

I did find that one of my two screws that hold in the edf lower foam piece was screwed in at a 75ish degree angle lol

Flies perfectly on the 5000.

Your workshop looks great! I'm getting ready to build out a nice shop, any chance you could do a quick video on your shop? What kind of cabinets, storage boxes, work surfaces, etc... Thanks!

Are you Tim K in disguise bro! You sound exactly like him and have the same laugh and similar look. Check the channel Tim K. I swore it’s you 👍🏻

Awesome !!

How don't you already have thousands of subscribers yet? Keep up the great work, your channel will get there real soon I suspect, excellent production value and information for enthusiast.

@angryzeppelin2750

5 жыл бұрын

Well, simply put we wont pay youtube for placement. So we grow slow and organically. But with that our followers get to share in that journey with us.

@gpaje

5 жыл бұрын

@@angryzeppelin2750 That's good stuff, thanks again for taking the time and effort to do such good quality videos on these products. It has a direct effect on what I choose to buy.

Great job

Love you 😘♥️ thank you very much for this video, I love F-35 lol

Very nice unboxing video...oh yeah

damn.. thats insane

Keep flying

great vid! did you ever made a video of the maiden?? thanks. greetings from California

Will the Flysky FS-i6 6CH 2.4GHz AFHDS RC Transmitter w/FS-iA6B Receiver for RC work on this model?

Hi guys! do you have a video for the F-35's maiden? And also a flight video for the normal version of the F/A-18? Thanks, and happy flights! :)

mine also rubs on the left side though

Dude...what the hell you got standing on end back behind you there??

@angryzeppelin2750

5 жыл бұрын

Just shot the third video of them.... :) worked devilishly well! gotta love teasers! You are the only one that noticed!

@t_sixtyfivex_wing8787

4 жыл бұрын

Nice F18 e/f

Thanks for your support, AZ! You have an excellent voice for broadcasting. Perhaps I should make a Zeppelin next? Also, one note to your video: We actually DO sell an Admiral version of the Stability Plus gyroceiver... it's our top seller on the gyro page: www.motionrc.com/collections/airplane-gyros

@angryzeppelin2750

5 жыл бұрын

Yep. we just got one of them to test. I hope they work better than the lemons... FYI, dont take out with the stability plus on... R.I.P. 262

Overpriced Styrofoam junk build a balsa plane its not difficult i understand real turbine models are out of most peoples price range but that STYROFOAM GARBAGE is a big waist of money

@angryzeppelin2750

5 жыл бұрын

You know... We encounter this type of attitude a lot. So, I thought I would take a moment and write up a response to this. I humbly disagree overall with your statements. You see, as an ambassador of this hobby I want to bring the joy of flying to as many as I can. And yes, balsa is a rewarding part of that as well. But if we had to make every person who wanted to learn to fly spend 3 months building a model from balsa, running OS nitro engines and monokoting there life’s away we would be stepping back into the stone age of RC flight. The reason this hobby keeps growing, innovating and evolving is because foam planes make it accessible to everyone. There is no place for elitism in this hobby. Now yes, my first plane was a nitro great planes balsa trainer more than 20 years ago. And it was super fun. And I still love balsa planes, in fact I love using my laser cutter and designing my own planes. But my ego is not so out of whack that I would look down my nose at people for what they fly. I love balsa, foam, and foamboard planes. In fact, one can argue that the flight test guys have done more for this hobby than almost anyone. Is there joy to be found in the journey of making a balsa plane? Yes! Is there joy to be found in designing your own planes, moding or frankenbuilding planes? Yes! But the idea that you spend months making a plane, to crash and then rebuild for months again means you never gain airtime and thus never master the skill and the joy we all seek is to throw a bird into the sky and pray it comes home in one piece. We believe that there is no right or wrong way of building and designing planes and that using a zealotus perspective through the eyes of elitism and self-importance is damaging to our hobby. We encourage people to find what makes their hearts sing and to have fun learning. Keep flying!

@Stevonoles1

5 жыл бұрын

Fact is, everything is going foam. Balsa companies such as PA will be gone by next year. I have been waiting on a canopy for my PA XR61 for 18 months. Out of stock. Foam is easier and cheaper to buy, repair, and fly. This is a great hobby and I am shocked that someone would make this statement. I love my foam jets and would not ask for anything different. I am a pilot, not a builder. I want to fly my planes, not spend months building only to have a problem and spend months repairing. Thank you Motion RC for everything you have brought to our hobby in the last few years. In a time when it is hard to get people to do anything outdoors, you have made it easy an fun for all. It is much appreciated.

@hifinsword

4 жыл бұрын

@@angryzeppelin2750 You're so right! What difference does it make what the plane is made of? None! Balsa was the material of choice when that's what was available. With modern technology, and CAD, we can build planes with so much detail. And they fly great. I got into the hobby less than a decade ago and only fly electric foamies, except for 1 balsa model given to me. If I had to build with balsa and use internal combustion engines, I would not be able to be in the hobby. I don't have a workshop and the wife would not want the garage stinking up the rest of the house with fumes from my models. And since I'm past Medicare age, I don't want to spend my time building. I got into the hobby to FLY, not build. Building may be a part of the hobby many enjoy more than anything. But it isn't for everyone.

@hifinsword

4 жыл бұрын

I've got a big waist, but it's not made of money, only fat. Or did you mean waste? Who cares what your plane is made of? Foam, balsa, plastic, whatever flies is what matters. If I enjoy my foamies, then that's not a waste. It's money well-spent and enjoyed!