That's made my life soooo much easier. I'm beginning to think your a mind reader and can hear our screams of frustration in doing things the hard way.

@MangoJellySolutions

Жыл бұрын

I knew you was going to say that 😂. It's getting a bit spooky how many times people have said they was looking for a way to do something and then a few days later I release a video on it. I'm starting to frighten myself (maybe I should start doing the lottery lol)

The value of FreeCAD is much enhanced by your very instructive videos. I always recommend your videos when recommending FreeCAD. Thank you.

@MangoJellySolutions

Жыл бұрын

Thank you for the kind words and recommending the videos. I have loved producing these videos to help people.

I'm sitting in front of the computer alone, watching this lecture and laughing. I laugh at myself because for the fourth time I want to click like again :) ~

Thank you for making this great tutorial, which addresses an often-requested feature regarding FreeCAD. I learned some good tricks from your video today. 🙏

@MangoJellySolutions

Жыл бұрын

Great to hear, glad you enjoyed 😁👍👍

👍When first learning Freecad was looking for button to place 3d pattern on surface.

This is a really neat workflow! Thank you!

@MangoJellySolutions

Жыл бұрын

Glad you like it! 😊👍

Just in time for my morning Cup of Joe.

Excellent video as always, Mango! I found that I didn't even need to move the tread pattern off the scaffold sketch for a perfect pattern. I'm going to have to go through your lattice series, I guess, because this workbench seems super powerful.

@MangoJellySolutions

Жыл бұрын

Thank you. It's is a great workbench. There is still so much in there I need to go through as the documentation is pretty sparse so still researching and learning about the workbench so that series is still being added to though it looks like it's stopped. Glad you enjoyed.

Very nice! Thanks so much for doing this. Now I need to decide how I wish to build the main framework of tire and apply this video.

Nice results. Thanks!

Excellent video. Well presented and very useful.

@MangoJellySolutions

Жыл бұрын

Thank you 👍😁

Thank you. Great only 🙂

I have a problem on 17:45. The recompute of sketch 2 does not work (V 0 20 Build 2). I made an own example where I had no problems by adding additive sketches. And using B-Splines for the sketches is possible ... but at the end I can not cut out off the cylinder.

Would this work on the inner surface of the tube for grease grooves? Of course it would create a rectangular groove cross-section. How could you create a trapezoidal groove cross-section subtracting outward from the inner surface of the tube? I have tried using a helix with the pitch set to 2 times the cylinder height so that each groove is only 180 degrees of the cylinder. With such a high pitch helix, the trapezoidal sketch profile on the XY plane gets distorted badly in the sweep. It seams to me that you would need a sketch plane that is normal to the endpoint of the helix. I do not know how to establish this local coordinate system sketch plane.

Thanks Mango. With version 0.21.1 I got up to Image WB. Seems like it has been removed. What else can you recommend ? In the end I went to draft and import image. My image was not really patterned OK so I just copied the pattern on screen. Worked out fine. Then transform, rotate and scaled it via the parameters. Excellent video - thanks. Quite tricky though.

@MangoJellySolutions

8 ай бұрын

Glad you enjoyed the video. So the workbench was removed for a different way of importing and scaling reference images. I created a video that explains the new method, it's an improvement on the image workbench Here's the link to the video. kzread.info/dash/bejne/iZyspqOgo87JeKQ.html And thank you for taking the time in sharing what you did. Always helpful. I will update the description of this video to point future viewers towards the video. Thanks once again.

@Appregator

8 ай бұрын

@@MangoJellySolutions Great. I will watch your updated video alternative. 👍

I'm assuming this same concept can be used on a flat surface for a different type of of form/mold, correct?

@MangoJellySolutions

Жыл бұрын

Not exactly the same, you don't bother with the sketch on surface in the curves workbench and use a standard extrude in the part workbench on the lattice object. I have a number of tutorials for lattice workbench in a playlist where you can see how the lattice workbench can be used if that helps.

@brerdane

Жыл бұрын

@@MangoJellySolutions Thank you so much!! I've been driving myself crazy trying to figure out how to do this on a flat surface for another hobby. I was going to look more into the lattice workbench as I can see some artsy uses for this same hobby that I can share with friends.

I'm sorry but the cut part at 19:00 didn't work for me sir

Interesting....Thank you