A great improvement in the look of it too, I would do every track pad as look even more realistic…

@theminiatureconstructionco4556

Жыл бұрын

I thought about it but i wondered if every other link would give more traction?

Great work. Nice improvements. I know they are just small models, but it is nice when they can perform somewhat similar to their full size version. 👍

@theminiatureconstructionco4556

2 жыл бұрын

Yes it turned out quite well. I was genuinely supprised. 👍

@modelnutty6503

2 жыл бұрын

for sure disappointing when they're too darn wimpy, this one is FIXED :)

I have a WL excavator. I added lead to the inner track assembles. But also hot glued bb’s in all the limited nooks & crannies of the upper housing. Big difference!! It’s almost 15lbs now and performs way better. Off topic a bit, but I wouldn’t buy the WL again. It had massive cracks in the main stick out of the box! Really! I had the seller send me new parts and they cracked in higher stressed areas! I ended up making my own aluminum gussets. Time consuming but no more problems. Btw if your wondering what this 65yr old was doing with the machine. I would scoop dog food from one bowel to another. That’s all! After 30 or 40 battery cycles it hasn’t broke yet😁

@theminiatureconstructionco4556

Жыл бұрын

I bet your dog loves it! 😅

Very nice job on this. Some really simple but effective mods you did here. I think Steve Shen did the track mod on his ripsaw tank. I like your idea of utilizing old windshield wiper bits! I think it worked very well. Great job on this Sir! 👊🏼😊👍🏻

@theminiatureconstructionco4556

2 жыл бұрын

Surprisingly it worked a treat! Cheap too! 👍😅

@modelnutty6503

2 жыл бұрын

@@theminiatureconstructionco4556 fit near like made for it really.

Nice vid; I did the same thing when the bulldozer first came out and I also modded the blade to dig down deeper; I then compared it to a stock item out of the box and the difference was extraordinary.

@theminiatureconstructionco4556

Жыл бұрын

Yes, some small changes make all the difference! 😄👋

Love the wiper blade idea!!!

@theminiatureconstructionco4556

Жыл бұрын

Yes it worked out really well. Another subscriber has said they just turned the tracks inside out. Not sure if that works or not. 👍👍

Good Analysis, its a smaller model than I thought. It has to have more weight and better tracks and weight to move earth around and rocks will be a problem also...

@theminiatureconstructionco4556

2 жыл бұрын

The mods make a decent difference. 👍

You should of tried flipping the rubber track around, it worked for me top race excavator but it’s still very very cool 😎 🎉

@theminiatureconstructionco4556

Жыл бұрын

Wow never thought of that, super simple too! :)

@paulkandi

Жыл бұрын

Was just thinking that, going to try it.👍👍👍👍

Thanks for the video, did a similar thing with my dozer, adding fishing sinkers to the inside , will take on the track upgrade as well thanks mate, from Australia 🇦🇺

@theminiatureconstructionco4556

Жыл бұрын

Yes, I had a mate that used fishing shot and glue to add weight! It worked a treat. Your more than welcome and thanks for watching!

Nice mod thanks for the video looking forward to getting one of these.

@theminiatureconstructionco4556

2 жыл бұрын

For the money they are great. Perform these mods and they do an ok job! 👍😊

Great video, I might actually buy one now. 😂

@theminiatureconstructionco4556

Жыл бұрын

It's a cheap way in to construction RC. And with a little work you can make a big difference! 👍

Great Video

@theminiatureconstructionco4556

8 ай бұрын

Thank you very much! 😄👍

Good Thanks 🙏

@theminiatureconstructionco4556

Жыл бұрын

Your welcome! 👍

oh yeah that really mage a differnts in the way it worked i am wanting to get one an the excvator so thanks for the great video

@theminiatureconstructionco4556

10 ай бұрын

Yeah its a good mod, couple it with some extra weight and you can do some actual work. Albeit light stuff! 😄

Gonna do this to mine 👌👍👍😀

@theminiatureconstructionco4556

Жыл бұрын

Apologies for the late reply. Your comment has only just been shown to me on my notifications. Yes its a good little mod that makes all the difference!

cool mods, the tracks also look better imo.

@theminiatureconstructionco4556

2 жыл бұрын

Yes it does actually now that you mention it! Works a treat! 👍

@grrfy

2 жыл бұрын

@@theminiatureconstructionco4556 I have also come up with a mod for the broken excavator thingy,perhaps show you later on.

@modelnutty6503

2 жыл бұрын

@@grrfy seen those and usually ouch, for ratchets being too wimpy to dig+move soft dirt.

@grrfy

2 жыл бұрын

@@modelnutty6503 its not the ratchet version, its the linear actuator version I have modded👍

@modelnutty6503

2 жыл бұрын

@@grrfy the screw driven aren't bad on muscle at all, the bucket can even help pull it up something steep. total toy versions can't compare.

nice upgrade esay an simply...i have a loader am i am looking too get me a dozer...

@theminiatureconstructionco4556

6 ай бұрын

Nice cheap RC, cant go wrong really.

hello thank you for your video I am waiting for this little bulldozer and I will do as you modify thank you

@theminiatureconstructionco4556

Жыл бұрын

Hello! Yes it's well worth doing. As it makes a decent difference. Thank you for watching and please subscribe if you haven't already.👍👍

Very nice video. Is there an RC scraper as well in this scale?

@theminiatureconstructionco4556

8 ай бұрын

I don't think so, but there should be!!!! :}

Awesome Fix !!! I wonder why they do not make a metal version because this plastic one does not work good ???

@theminiatureconstructionco4556

10 ай бұрын

Not sure. They do with the excavators!

Have you seen the military "camo" version ?? Aaaaaaaasum and coooooooooooooooooool ! love the bulldozer vids , just finished my Heng Long Bulldog .

@theminiatureconstructionco4556

Жыл бұрын

I haven't mate no. Glad you're enjoying the videos though! 👍👍

Hi buddy I like your work have you done a upgrade on the battery 🔋 I have done the blade and that's great cuts great now but battery does not last long 😮‍💨cheers Shaun 👍

@theminiatureconstructionco4556

Жыл бұрын

Hello Shaun thank you very much! I've not updated the battery yet. It's finding space on the dozer is the problem. 👍👍

@shaungwatkin1638

Жыл бұрын

Hi was thinking if you could have like a extension line wires to plug it in to on the old battery box and run them under the bely of the dozer to the rippers at the back and place the new battery on top of the roof or the ripper area 🤔and you could disconnect from there

@theminiatureconstructionco4556

Жыл бұрын

@@shaungwatkin1638 that sounds like a plan. I wonder if anyone does a higher capacity battery of the same size. WPL battery's are the same size but you would have to change the connector. 👍👍

works very well, do you think it will match in scale with the WPL B series??? 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

@theminiatureconstructionco4556

2 жыл бұрын

Now you're asking. I personally think its actual scale is about 1.22 / 24. They quote 1:16 but that's just nonsense! 👍

@modelnutty6503

2 жыл бұрын

the "mini D12" might be about the right size next to it.

@theminiatureconstructionco4556

2 жыл бұрын

@@modelnutty6503 that's a good point. 👍

Where did you get the little grousers (track extensions) for the tracks?

@theminiatureconstructionco4556

Жыл бұрын

1:10 got them free from a local motor factors. They were second hand. 👍😉

After watching this video I got myself one lol

@theminiatureconstructionco4556

Жыл бұрын

Happy bulldozing! 😄👍

Which had more of a impact, the weight or the extra traction? I wonder if you would have noticed a difference with just one of the upgrades?

@theminiatureconstructionco4556

11 ай бұрын

I think they both go hand in hand. Both done together probably equals a better result. 😀👍

slanted blade or snow blower attachment? either way it'd clear freshly fallen snow.

@theminiatureconstructionco4556

2 жыл бұрын

Hahahaha sounds like a plan, more fun than a shovel! 👍

@modelnutty6503

2 жыл бұрын

@@theminiatureconstructionco4556 foam block and aluminum flashing would be easy to make a clip on slanted blade. more fun than a crawler with a lawn mowing boom stuck on it.. seen done with a 390 motor and weed-eater trimming line.

Is there any upgrades for the drive motors?

@theminiatureconstructionco4556

Ай бұрын

Don't think so unless larger motors can be fitted. They have slipper clutches in to prevent damage if too much strain is applied. Must admit so far I've not hadcan issue with the standard units. But I do tent to pick scale appropriate material to move around. 👍

@drzflyest4

Ай бұрын

I might have missed it but How much weight sid you end up adding?

@theminiatureconstructionco4556

Ай бұрын

@@drzflyest4 I think as much as I could fit in the body without it interfering with anything. Sorry I couldn't be more specific.

Hello, whats the different betwen huina 1569 and1554 . Can i an 1554 Drive Witz 7,4 v ? I hop you Fan help me . Thank you. Sorry for my bad english

@theminiatureconstructionco4556

4 ай бұрын

Don't apologise! The difference is the voltage. I don't know if they are interchangeable? So be cautious.

@user-cc8hj4yj9o

4 ай бұрын

@@theminiatureconstructionco4556 thank you

@theminiatureconstructionco4556

4 ай бұрын

@@user-cc8hj4yj9o your welcome

Would you consider putting metal tracks on it?

@theminiatureconstructionco4556

11 ай бұрын

Do they do them? 😀👍

Hello 😊what lipo are in the dozer? 2 s or 3,7 volt?

@theminiatureconstructionco4556

4 ай бұрын

2S but there is also a 1S version as aswell i believe.

@heliflyer111

4 ай бұрын

My have ä 1s lion Akku, can i a 2s lipo drive?

@theminiatureconstructionco4556

4 ай бұрын

@@heliflyer111 not sure, you could damage the board.

@heliflyer111

4 ай бұрын

briefly had a 2 s lipo on it and it went so far 🤔

Is it holding on?

@theminiatureconstructionco4556

Жыл бұрын

So far yes. It doesn't have a hard life though. :)

this model huina 1554?

@theminiatureconstructionco4556

11 ай бұрын

Hello. Sorry for the late reply. Yes its known as both the 1569 and the 1554? Weird??? :)

What did you mean demonetized? Why?

@theminiatureconstructionco4556

2 жыл бұрын

I accidentally said rubber 'cuntent' instead of content! It was just a little joke really because there's an anti swearing waver in the monetisation rules. Just trying to be funny. 👍

@rexrcs

2 жыл бұрын

@@theminiatureconstructionco4556 🤣🤣🤣