Parts: 1) black trashbag 2) bare copper wire 3) pice of glass 4)1n4148 diode or zeenar diode 5) 60/40 electrical solder 6) krazy glue 7) some sorta metal tape that is basically a bare wire Tools: multimeter, soldering iron, scissors. Success: better luck next time.

@666cowboy69

5 жыл бұрын

Just have to think if it was as easy to make a solar cell as wrapping some copper around glass edison or tezla would have been all over it, but thats just my two cents im not an electrician.

@youview68

5 жыл бұрын

Electrical solder just correct the spell

@SAMOBILETECH

5 жыл бұрын

Zeenar diode

@arjitsharma1364

5 жыл бұрын

And a magnet to generate flux And so the voltage it's not a solar cell it's a coil which is generating voltage due to magnet

@whereisallthefun9973

4 жыл бұрын

@@arjitsharma1364 ur crazy

The video is not fake. The diode used can be found in any small (or big) electronic device. It's a IN4148, and they are cheap. 40-50 will cost less than $5. Just make sure the black ring on the diode is placed in the correct direction (you can see this in the video) as it is what is keeping the electrons flowing in the right direction. They are not Zener diodes as these are typically all black with a silver ring around them. In addition, with the use of two types of plastic, with wiring, it appears that it also acts as a mild capacitor. This is why after blocking the sun, there is still ~1 volt showing. Note that although you are producing around 4 volts, the amperage is in the milliamps, may 1 or 2. A couple of them could trickle charge a cell phone, but it would take the entire day of sunlight during the summer, and then some.

@1walicki

6 жыл бұрын

Glenn Krieger any thoughts on scaling up ?

@grahamholmes8913

6 жыл бұрын

If it's a solar cell, it should be producing DC, so why do you even need a diode? My view is that there's a hidden coil somewhere which is energising this apparatus like a transformer secondary ... therefore it's producing AC, and the diode is needed to rectify it and make it look like it's producing DC for the meter.

@alvarofuentesarjona2668

6 жыл бұрын

Mr. Krieger, The diode 1N4148 is a small and fast electronic component made of silicon, high conductivity, used in the processing and detection of radio frequency signals very effectively, with a reverse recovery time of no more than 4 ns, its name Follow the JEDEC nomenclature. I'm sorry to tell you, it's a Zener Diode.

@1984Cope

6 жыл бұрын

How many is a couple?

@glennkrieger

6 жыл бұрын

Yes, you are correct sir. After I commented I realized this also but haven't re-commented until someone like you, who was alert, spurred me on. Thank you for the correction.

Thanks for the instructions.

Stop making fool, I make it but no energy produced, use your time for other activity

@syproseomondi8177

4 жыл бұрын

Fine

@E1l2r3o4_YT

3 жыл бұрын

Yeah he or she is right its fake make something eles that works then everybody will like and do it.

@infinixs4blue65

3 жыл бұрын

i am working in Sunpower Manufacturing, we are making solar cell from ingot silicon to finished product solar cells and we are using different chemicals to create it, this video is waste of time.

@infinixs4blue65

3 жыл бұрын

@Sarah Balaghi then drop down the link of the videos of your own diy solar. no link means not true

Works for me. Although was getting 7v/1.42a using 8x16" polycarbonate, Painted flat black, 60 feet of copper coil from a 10amp transformer and a diode. it works fine if it's a hot sunny day. Some stuff you can say its fake but don't say something that you never tried.

@fabriciohipolito

6 жыл бұрын

What kind diode you used?? Zener diode??

@Wagna87

6 жыл бұрын

No, I used Rectifier diode (ID:IN4007) it works fine.

@edwardcoleman9291

6 жыл бұрын

Will this diod work with larger panels?

@fabriciohipolito

6 жыл бұрын

Edward Coleman Like batteries, connecting several small panels should work.

@lucasventura2966

6 жыл бұрын

John,do you know what kind of diode was used on this experience? (Zener or Recitifier). And the current obtainded on this experince,do you know?

I notice that every 4th winding, the copper is doubled over!

Whatsoever the parts are; whatsoever the viewers know; the names and rating of parts and materials must have been clearly mentioned in the video, also the number of turns (the coil).

What is the amperage from this cell? And could it be possible to connect several cells in parallel then use one diode to direct the current?

It looks pretty neat, that is if your looking at wave lenths at 400 to 700 nm and freqs in hundreds Thz. But it resembles more of generation of thermo electric cause of the non-lighted side of this circuit. Proof of this will need to be duplicated to see if this works and parts and theory to be outlined. To take this a step further (for the fun of it) it will be great to see if this circuit can be made to detect red, blue, green bands of light. This then will make it a great video..

It's a simple coil connected to a Diode..... 4V from air? It's a fake!

@paulanthonybridge5741

Жыл бұрын

It's probably the diode producing the volts !!!

@paulanthonybridge5741

Жыл бұрын

Its the photoelectric effect in the diode ! The coil does NOTHING AT ALL !!!

@AniShh89

Жыл бұрын

Whatever he got what he needed..views and likes 😅

@sunny52122

Жыл бұрын

​@@paulanthonybridge5741 it's fake or real ? Plz tell

@paulanthonybridge5741

Жыл бұрын

@@sunny52122 i think it is fake. The diode was probably producing the voltage they are light sensitive.

As photovoltaics are rated in open circuit voltage and short circuit current, your project certainly demonstrates an open circuit voltage. It would have been interesting if you would have put the meter into current mode to demonstrate that the cell actually produces a usable current. As the wire is continuous and insulated except at the connections, i would suspect that this is related to photo-capacitance where as a true solar cell is just one big leaky diode. Very interesting though!

Not solar, solar requires 2 metals. This, if it works, would be thermal coupling.

@arjitsharma1364

5 жыл бұрын

It's a coil and under multimeter their is a magnet

American Tech,does it work on cloudy days or just on sunny days? And is the voltage generated by the warm of the wire or by the luminosity? I am questioning it because I am trying to get this voltage, but I am obtaining just a few Volts on my multimeter.

The signal diode is for weak current. Near there must be an electromagnetic source like , a transceiver. SCAM!

With that set up even the back picks up radiant energy and can move it. Nice work man.

He just messing with the magnetic field behind the multimeter proof hand

That is not a solar cell. it is a very basic AM radio.

@alisoltanifar2584

5 жыл бұрын

RIGHT RIGHT RIGHT ....

@ruiruivo83

5 жыл бұрын

the concept looks nice... does it really produce energi?

@rajendrasinghpanwar625

5 жыл бұрын

You are right

@mostcommonfacts171

5 жыл бұрын

😄😆😀🥰

@mohammedjawadforelectronic9190

5 жыл бұрын

it's not even an AM radio because there is no resonator LR LC RC tank second thing it's may recieve some energy but in micro or even nano watt with high frequency so multimeter can't measure it the funny thing the multimeter on the dc scale Lool XD

I tried this and it actually works allot better if you burn the copper wire first and let it oxidise. The thin layer of copper oxide acts as a mild dielectric which helps trap electrons that are knocked off the surface by photons. The maximum volts I get is around 1v per cell at an efficiency of around 5 - 10%

@alltypeartvideos8665

5 жыл бұрын

What is the material

@alltypeartvideos8665

5 жыл бұрын

Reply me

@stefanogrillo6040

5 жыл бұрын

yes its called thermoelectric effect, the front is exposed to infrared radiation while the back not so a little current i created. more wire is = more current. thats obvious

@AlternativeDIYEnergy

5 жыл бұрын

@Karl Childers Cor blimey myte. Yoor Engish is vary gud. Jurs louk myn.

@666cowboy69

Жыл бұрын

​@Karl Childers im not sure anyone can help you....i was taken out of my math classes to have extra english classes through all of middle school...they still never got around to teaching me proper grammar... honestly i think the whole program is overrated...they only wanted me to make less words into more..awful..i wanted to make more words into less without loosing information. i still think my way is better. also the concept of three theirs is still lost on me, as told my second grade teacher when she informed me of the other two; "you can keep them i only need one their." i have to say, i stand by my second grade self, context reveals the meaning. why do i need 3 spellings for one word...two and too is actually justified, there are context examples where it makes sense to specify but i havent seen any for their yet. this they them stuff is actually awful, it robs the language of information. find a new way that adds gender in addition to sex: dont destroy language. but hey i know how to use commas, colon & semi colons correctly...i just don't always choose to because i know the rest of you dont. i hope i made someone laugh ;)

You cannot do anything with Volts only. Show us the Amps it generates and we will believe you. Like this it's Usless information.

@GeorgeZaharia

5 жыл бұрын

3.81 dc volts = 0.00381 amps... or 3.81 microamps. divide it by 1000

@davidzammit9359

5 жыл бұрын

So it is sort of useless because to generate 1amp you will need 263 of these. Please, correct me if I'm wrong.

@davidzammit9359

5 жыл бұрын

@@GeorgeZaharia So it is useless because to generate 1amp you will need 263 of these. Please, correct me if I'm wrong.

@MohamedAhmed-zi1ru

5 жыл бұрын

@@GeorgeZaharia why 1000 ?

@surindersingh-ko7mq

5 жыл бұрын

Hi try to make fool bro it not a grate idea

Please mention the materials in the description.

Love your video's. I have too many of the "$1.00 solar lights non working of course. If I wanted to put them together would I have to use a diode with each one? My thought was the energy flows downward so maybe I don't ? Thanks for any insight. Terri from TX

@jbehzad

2 жыл бұрын

If you connect them in series ,only one diode on positive side in enough to protect the cells .

What are the things you had used here can you explain about that resistor like structure being used in this solar cell

@AdricM

6 жыл бұрын

it appears to be a diode, so its more of an antenna than a solar cell. probably has a strong ac magnetic field nearby

Please add the number of diodes and the number of thickness of the wire to the description

Technical humor. Gotta love it.

I have a question that what capacitor you use for this solor cell

@CarlosCruz-nu1cs

3 жыл бұрын

Is not a capacitor is a diode

@blubhumm

2 жыл бұрын

@@CarlosCruz-nu1cs was für ein idiot😂

You should tell the requirements first

It probably works differently, you have to interrupt the path. Between the cold end and the warm one. Tak na Polski łep ...

@MrGarfield773

4 жыл бұрын

Tak, tak samo myślałem.

Mujhe aapki yah video bahut acchi lagi

Yo lo he estado haciendo de diferentes configuraciones empleando los mismos materiales del tutorial y cada celda me ha proporcionado una saida de tensión diferente cosa que me sorprende cada vez, si funcionan bien ..pero debes de saber como hacerlo y para ello tienes que saber entender los principios y leyes que rigen la física de las partículas fotónicas, además el comportamiento del cuerpo negro, y algo mas sobre electromagnetismo y cosas similares sobre el efecto óptico, etc etc. Estos conocimientos son las bases de como aprender a crear ciencia. No solo es cosa de hacer algo y ver si funciona o no sino documentarse, hacer cálculos, experimentar una dos o mas veces hasta encontrar la razón que rige esas leyes y entonces proceder a crear y explorar tus ideas.

@bitmap0.00

Жыл бұрын

no eres un bot cierto?, de veras funciona?, me estas diciendo que con solo enrrollar un alambre de cobre extra fino en una placa transparente podré tener mi propia fuente de energia?

@harrytopia282

Жыл бұрын

@@bitmap0.00 no its fake, inductors can only generate a current in the presence of rising and falling magnetic field.

@jhoncleiderbrandalvarez8951

6 ай бұрын

Esto es falso

you should also name the parts that u r using if you don't then your videos are useless as we can't know which parts r required to make the particular device/project.

@saritajha6885

6 жыл бұрын

Yes u are write

@sadiksheikh8252

6 жыл бұрын

right

@sethkdab1214

6 жыл бұрын

Zener diote (idk how to write it lol )

So I suppose you have to plug it in to get it to work?

The speaker magnet may be inducing current in coil

woodprix is full of awesome tips. Very helpful to me. Thanks

American tech - seriously lol at the name Why did you chose American tech name lol

@syedabbas8214

3 жыл бұрын

should be indian tech lol

Please give all product details you use to make solar.

@ggggggg4327

3 жыл бұрын

That thing is called Diode, it leads the current in only one way and blocks from the other side

Tu é o bichão mesmo em doido só com uma bobina consegui energia solar kkkk. Como eu queria que fosse tão facil assim.

@davishimobokuro3514

5 жыл бұрын

Kklklk e mesmo

Why you don't name the parts

@blackbway

6 жыл бұрын

HUZAIFA HUSSAIN glass, black plastic, glue copper wire, resistor.

@faisalsardar9001

6 жыл бұрын

the last thing is not resistor its zenor diode used in dc circut

@terrisharp46

6 жыл бұрын

Guess it works like a capacitor, ?? if so shows you how dumbed down they have kept their college educated .... I always thought u used 2 dissimilar metals silver, copper wire to be specific, maybe that was UFO technology I was looking at. Will be wrapping one shortly...

@needforszpit

6 жыл бұрын

1n4148 diode

@pixelettee

6 жыл бұрын

You'll also need some sort of strong magnet to induce current in the coil. In this case it is the speaker behind the multimeter.

Ok man, I'm calling you on this one. As in you, the one that made this video. Show the measurements an supplies list for this one.

@welshv1nce449

3 жыл бұрын

*two years later*

@vivivi..

3 жыл бұрын

Still nothin 😂

@Daboresa

3 жыл бұрын

These guys are just aiming for some click baits rather than being real scientific experts, so he will never reply this even if you pay him, deep down he knows this ain't real

@wagalanka717

3 жыл бұрын

Check out Robert Murray Smith's for a great solar cell

He has used a zener diode which is acting as a solar cell. You can make a solar cells just from LEDs. (Get a LED torch having 10-15 or more LEDs). Just comnect their effective end points to Multimeter and put that in sunlight and measure the volts and ampere.

@Allroundermaster360

2 жыл бұрын

Nice

Where you used silicon while silicon convert solar energy into electrical energy.

@big_o1952

3 жыл бұрын

He didn't that is why it is not a solar cell

Where did you put the oscillator? :))

Hey bro I subscribed your channel so tell my how current it can produce and please give me the material namea

@big_o1952

3 жыл бұрын

It is not real that thing doesn't produce energy

You can do the same with graphite powder rubbed on laminator sheets. Use copper tape for positive and aluminum for negative. Try using it with chlorophyll for interesting results.

Creative video, thanks for sharing :)

Instead of the shitty music you could try to speak. Also the whole video should be not longer than 3 minutes.

@CreativeJahirul

6 жыл бұрын

hsvmobileac How to make air conditioner at home - Eco Air Cooler 10° Celsius. *$ubscribe plzz* Video Link:- kzread.info/dash/bejne/qJh-28yemdeveZM.html

@nikhilthokchom8772

6 жыл бұрын

hsvmobileac

@runfromgaga

6 жыл бұрын

it wouldnt be a typical youtube video if the annoying music was left out.

@millionthmonkeymusic

6 жыл бұрын

hsvmobileac, then make your own fucking videos.

@carlw

6 жыл бұрын

hsv.. there are more 'positive' ways to recommend something. If you had have simply provided him the link to your videos, he could then check them out and learn the proper cinematic techniques. Personally, i like the structure.

This is not fake. Electricity are induced into copper wire on the principle of magnetism or heat. Electric motors, alternators and generators work on the principle of magnetism. Electricity are also produced when to dissimilar metals in close contact are exposed to heat. This solar cell clearly works on the principle of heat induced into copper wire. In the video a Zener diode is used to ensure that the current moves in one direction. Any diode for that matte can be used. The reason why there is still a reading on the voltmeter is because of the residual heat left on the device. Those who criticize clearly do not know basic science and their arguments are clearly based on racism. American Tech, thanks for a great video.

@grenierworkshop

5 жыл бұрын

ok that do some voltage but for the amp this is better or worse than conventiionall solar cell ?

@peterwilken7345

5 жыл бұрын

@@grenierworkshop the point is it's free you can make it yourself try even on larger scale my shed runs on this style unit and a joule theif for lighting

Umm... what kind of partwas that? Do i have to order a part from radio shack? Is it a diode and do i tear apart my microwave to get a part????

@big_o1952

3 жыл бұрын

Don't waste your time it is not real

Aunque este vídeo no demuestra todo el procedimiento de la creación de dicha célula solar, se nos están demostrando con ello que materiales son necesarios para realizar la construcción de dicho elemento solar. Para que realmente pueda tener un despeño óptimo se deben de estudiar ciertos parámetros físicos y químicos que influyen en su construcción y que son las cosas que nos darán las verdaderas causas físico teóricas del correcto funcionamiento de dicha célula solar. El vídeo es bueno, las nociones de construcción son correctas, nada mas que quien pretenda crear algo realmente eficiente y bueno debe de buscar información relevante que le ayude a entender que pretende hacer, como hacer, cuando hacer y como va a funcionar. Es preciso tener toda la información a la mano ya que el vídeo no demuestra la realidad del objetivo de la célula. Este es un dispositivo con principios termo fotovoltaicos. Jorge Segovia Castañeda Técnico en Electrónica Industrial. Asesor en Física Cuántica y Asesor en Química Inorgánica. México octubre de 2018.

I m an electronics engineer,, doing R and D since 10 years but i think its not fake.....but having a very low accuracy...

@keerthivasan5729

5 жыл бұрын

when some materials subjected to heat energy there may be a electron flow so that the electrical energy produce in that copper wire.its not fake

@robertwjenkins6916

4 жыл бұрын

What type of diode did he use...I really don't know much about electronics but would like to know more

it will be much better to understand if you put the name of items you used in your video on description or even in the video.

@jaydontuluauau1891

Жыл бұрын

Yeah true

Smart :D Can it be stored like the ones you buy

@big_o1952

3 жыл бұрын

It isn't a solar cell

Solar panels work by semiconductor surfaces, not magnetic induction.

@geraldedang958

2 жыл бұрын

Two separate ideas

I can't believe you made us watch every single thing you did. Ever hear of skipping to the next step once you make your point?

Muito bom

Great music👌👍

Thank you .Very good..

Instead playing this music you should name the parts you're using if you don't want to explain the procedure at least 😒

@sachinkamboj2177

5 жыл бұрын

Ki pata nahi chala

@junaidchaus2121

5 жыл бұрын

Hi

Caraca, muito show isso. Vou fazer uma gigante e por na laje

@sourfruticake2164

3 жыл бұрын

Brasileiro querendo economizar kkkkkk Esse painel gera corrente continua, a que usamos na tomada é corrente alternada

@chessmaster261

3 жыл бұрын

@@sourfruticake2164 se colocar um inversor, dai vira alternada.

@sourfruticake2164

3 жыл бұрын

@@chessmaster261 é uma diferença bem pequena, de qualquer jeito já ajuda a diminuir a conta de luz

@sevieneelmundial4232

2 жыл бұрын

@@sourfruticake2164 bro es posible pasarlo a corriente alterna??

Si se puede crear una celda solar con estos elementos no obstante producir electricidad con simples hilos de cobre así como se ve en el tutorial no es tan sencillo como parece. En realidad hilos de cobre si pueden funcionar como conductores de electricidad en presencia del efecto Edison. La cuestión aquí es esta: los hilos de cobre deben de estar cubiertos de un oxido lo que les va a proporcionar una propiedad que los hará comportarse como semiconductores frente a la radiación solar y el hule negro empleado también proporciona un efecto del material espato que provee propiedades birrefringencia al material. La cosa es saber como colocarlas y hacerlos funcionar correctamente.

@user-ed8ec4bz8c

2 жыл бұрын

Sincerely yours, how is your deals? Any success?!

should it go like to 0.00 when u hold hand above it?

Correct it is fantastic idea

@siffle4249

5 жыл бұрын

Himal Baral it’s fake

@canalromanesc628

5 жыл бұрын

Yes

At least write the name of things you used in discription

@sandipmali8409

4 жыл бұрын

Nice

the clear plastic is 1/16" polyethylene sheet or Plexiglas, the black wrap is common garbage bag material.

Great job! Very low current, but I increase it with parallel connection to few more cells.

Why you don't name the part

cool ....Thanks for your videos

It should work but it is double the size for a 3 volt output when compared to the one available in the market. But its a interesting video. like it.👍👍

Hola el vídeo es muy bueno , pero de cuánto es el diodo zener para hacerlo igual. Te agradezco por el aporte .

@aliendbanin

Жыл бұрын

اي صمام عادي يشتغل

Which type of cover it is as you used in video

I need full details

Graphine will work better in place of the wire.

Does anyone know what parts were used for this video? I can guess for some of them, but not for everything. Thanks

Muito bom!Bem explicado!

@eletronicanovadimesaosidne1946

2 жыл бұрын

Pena que e fake kkk

@oscargutierrez5603

Жыл бұрын

bonita mentira, y malita la musica!!!!!!!!

name the parts too

you can make a solar panel with just LED, because solar panels and LED are almost the same, i mean they use the same material plus i tried to make it with the LED and it kinda works but i preffer you buy tho (Linda expensive) btw : zoals panels are just semiconductors

U should use bridge rectifier circuit for maximum performance!

@big_o1952

3 жыл бұрын

It is not real bro

why do you put the magnet under the mission at last

@InvincibleArts

5 жыл бұрын

To wrongly caliberate the voltmeter.. He used such the magnetic field produced by the magnet is calculated as DC voltage because the magnetic field is constant. This is a fake **** video

My dude I think that's enough ads already, chill with clickbait

Love the channel love the videos you don't want to speak great but please get soft non distracting music and write the parts info your vdeos are instructional if the instructions are incomplete or wrong the video loose the ineterst

How much of it would be necessary for 110v~127v?

It would be VERY helpful if you posted the parts you used in making the cell. I believe it would be best to put the specific name/description on the screen as the part was first shown or at least a parts list below the screen. Other than that I think it was a good video and thank you for the 54 related videos, too !!! 12/12/2018

it would help if you also explained what parts are used and if possible their links to buy

It looks like a homemade antenna receiver receiving RF waves and registering on your voltmeter. This was Tessler believe that you could convert enough of this into electricity you could use at home. I don’t think solar would be the definition of the electricity you’re receiving. Radio waves Can be blocked by your hand also. I was looking for solar panels

@rogerschrager3589

5 жыл бұрын

Tesla

C'est exactement ce que j'avais besoin de savoir, merci pour la vidéo.

@hieumoney4385

Жыл бұрын

Bạn đã làm thử chưa, bạn đã thành công chưa? Có điều đáng nghi ngờ ở đây

I love your detailed explanation...

@smithmytchel3719

3 жыл бұрын

it's joke ? they have no explanation wtf ?

It's definitely NOT FAKE. But it's not a PV cell either! It works on the Principle of Seeback Effects. (Correct me if I'm wrong)

I want to try making a solarcell with chlorophyl from plants. Plants generate some electricity just like solarpanels and they used it to split water into hydrogen ions and oxygen. They then let hydrogen ions react with carbondioxide to form sugars. The oxygen thus comes from electrolyses of water. The chlorophyl is responseble for this. You can disolve chlorophyl in ethanol or any other organic liquid like aceton, diethylether etc. Then let that evaporate on a peace of plexiglas and put fine metal wire on it (not insulated).

I've a question... Does it works just with solar enrgy ir I can use a lamp light

@Interesting-bf5qg

5 жыл бұрын

Yes u can

@big_o1952

3 жыл бұрын

@@Interesting-bf5qg it is fake guys it is fake

FREE ENERGY DOESN'T EXIST! Yup, ElectroBOOM is right.

@Mikael._

4 жыл бұрын

"Something explodes on his desk"

Do you know how many Amps it produces?

@cosmefulanito5933

2 жыл бұрын

Zero. It's a fake video.

Y pues estaría bien si pones la lista de lo que se ocupa aparté de los imanes

Put a shade over the cell to see a voltage drop

No se por que pero a nosotros los hombres nos gusta mucho soldar!! O cortar con herramientas todo!!! Eso es una satisfaccion incomparable!!! Buen video!!!!

@lucianoaviles351

6 жыл бұрын

La verdad ni idea por que pero también me gusta soldar y cortar cosas

@franciscolopez-pm1ve

6 жыл бұрын

jajajajajajaja estamos d acuerdo con eso saludos desde Honduras mis brother's

Can you make big electricity station and conect electric motor? (Sorry for my engleash)

@joeyocom5087

5 жыл бұрын

You can power a house with this

Good job ... thankyou

Please tell us about you use the Paper. Thank you

specify the parts you used

@galindezdiyprojects8415

3 жыл бұрын

he use garbage bag, plastic clear, a thin wire and zener diode

It would be really nice if you could explain the materials you used and how to put them on :,) I'm a noob at this

I can't believe making a solarcell is so easy. I was thinking about trying making a solarcell from chlorophyll which I want to coat on a plate of glas and then on top of it some metal wires.

@ERIKNOWAKK

2 жыл бұрын

This is catching radio waves its not this much easy to make it :D if it was this much cheap to do it we wont make them that much expensive

AT.... pls name the part that you are using 🙏👍