Foxbody Mustang engine resto DIY *LOOKS AMAZING*
Автокөліктер мен көлік құралдары
Restoring the foxbody mustang 5.0 HO engine is so much fun, and the results are mazing!
WIN PROJECT 4TO8, and:
-Monthly drawings for parts, swag, gift cards, and detail kits
-All KZread content pre released
-Exclusive discount codes
-WIN PROJECT 4TO8, or a car build
SIGN UP NOW: : bit.ly/2Fk4GtU
Hot links:
latemodelres.to/Foxcast_LMR_Home
www.detroitspeed.com
www.lasfit.com
mustangweek.com
www.buystifflers.com
ourdreamauto.com
pbhperformance.com
www.jaxwax.com
kooksheaders.com
Stay connected:
Instagram: @foxcast_media
Facebook: foxcastmedia
Website: www.thefoxcast.com
Email: caleb@thefoxcast.com
Пікірлер: 72
Turned out great! It always cool to see how a little time and effort can yield a great product and for relatively cheap!
That's taking pride in your work. Nicely done!
Looking great bro!!!! Can't wait for the finished product!😉👍👊
Looks fantastic!!!
I like the progress. Something budget friendly that anyone can do at home. The car is going to look brand new again.
Looks good. Did this with mine a couple years back but made intake black to match color of car
LOOKS KILLER!! Great work brother can't wait to see this thing done!
Building a mild 302 in my fox since I blew my old one up. I’m just a broke college kid but it’s been a great project so far. Following this channel really helps. I also live in waco TX witch is 10 minutes from LMR so that’s nice.
Looks amazing!
On that top plate I used to paint them black then take a block wrapped with a rag soaked in thinner and wipe off the raised areas while it was still wet. A flat belt sander works well too and helps keep the brushed finish.
Looks great!! I believe my oil pan was gray from the factory, not that it matters. Looking forward to this project
Great video ! Looks good
Great Job!
Nice video and parts look great!
I ended using Ford ardent silver wheel paint on my edelbrock rpm2 upper. Then sprayed clear on it. It turned out really nice!
Those came out pretty good. Lets see em on the engine!
Should ofbused a spin brush on a grinder.... will make quick work of it. I enjoy this very much! Love this type of content.
Man! I literally bought the exact same paint to do my intake and valve covers yesterday!
Very cool. Need to do something like this on my 88 😎
Nice!!
Great job cleaning it up dude. I've been doing something similar on my SSP. 4 to 8 is gonna be great 🙂
Woah! Water pump bolts!!? I tried to find some a few years ago and couldn't. This is awesome.
looks great buddy and plus we drive with the hood closed anyways but looks great
Get er Done!!!!!!💪🏼💪🏼💪🏼💪🏼
Nice Job
The Duplicolor wheel paint HWP101 Silver wheel paint is real close to the stock color. It has that goldish tint in it like the originals. I found this by accident since for some reason I have so much of this paint laying around. I painted my Explorer intake with it as well for a more stock look on my 89 LX.
Welcome to an all new episode of Foxcast at Home. This was a nice change of scenery even though I love your shop. I laughed out loud when you said you're not a professional anything. You just play one on tv.(KZread)
GIVEAWAY IS GONNA BE 🔥🔥nice video. STAY SAFE 🙏🏼
Thought I was watching Shaft at 00:45 ...."ohhhh yeahhh" 😂 Didn't know you Tennessee folks put your hot water heaters in the garage... always thought it was a Florida, Cali thing 🤔 Congrats on the sponsorship 👍
Spray clear coat over the intake and valve covers to seal them, and spray clear over the 5.0 intake badge to seal it
Put the balancer back in the bag they come in a bag like that to prevent surface rust on the key way.
Perfect timing! Just getting ready to do my intake.....just installed new polished valve covers, but intake needs some freshening. Thanks Caleb. By the way, what’s with the Honda?!! Lol
Love the channel man..Just signed up to be a Patron!!!..Keep up the awesome vids!!
What up , hows going ? I'm surprised at that aircraft stripper I've used it and it works well.. you need to read the directions on the paint cans if it says to paint in between 2 temperature ( 65-75) follow that and you can put the paint cans in warm water for a few minutes, it thins the paint a little better spray
Its guna be cool
I work at a Body Shop here in Mississippi. From what I was told Tal Strip changed the recipe for coating remover. The old stuff was bad for Ozone Layer or some shit. And yes, it’s junk now!
Painting engine parts is always so rewarding because the finish can be shit but it will still look a million times better than before lol. The only slight problem is not being able to breathe halfway through because there's so many fumes in the garage lol
@maxwellpeter1598
4 жыл бұрын
I love my exhaust fan lol
Harbor freight blast cabinet runs $189.99. Find a coupon and you tan take one home for around $150. It’s not great but it works. Don’t know how I ever got by without it.
Caleb, i recall watching a video a while back where you were talking about MMFF and magazines. Have they completely stopped releasing printed material. There seems to be no online action on their website either.
Looking good. To bad you wasn't keeping 4to8 and make it your drag car
I have a question i just changed fan clutch fan radiator overflow reservoir radiator cap water pump and heater core hoses thermostat and my 92 gt still overheats any opinions or suggestions will highly appreciated.
Kleen strip paint stripper works stupid good in only a few minutes
I bought a 89 5.0 Hatch back.......5 spd...brand new......1st yr the LX's came with the ungraded GT interior with nice lumbar adj seats.....it was metallic blue.......last year with-out airbag until the Fox body was changed , should have never listened to the wife at the time and sold it as we got into Harley's.....yeah, that was 20 yrs of fun, but now the car and the wife gone........got rid of both, but should have keep the stang.....
My first new car was a 90 GT. I remember the pan being gray? That was a long time ago so I could be wrong.
@JRC99
3 жыл бұрын
The one on my '89 is blue and it's never been off the car as far as I know
Most paint stripper is crap now since the EPA made the main ingredient that was being used illegal (methylene chloride). Aircraft stripper used to be the heat
How much harder would it be to go 4cyl to Coyote??? I watched your 5.0 push rod to Coyote. Does it add more, less or just different things to worry about?
Not pros. But damn do we enjoy wrenching and projects!!! Gonna be smokinnnnnggggg!!
Did you clearcoat it by chance?
What’s the import doing in the garage ? Wife’s S550 gone ?
😎
Just one can was enough to paint all that?
aricraft stripper sucks since they took the chemicals out of it. i found some old cans that had the chlorine shit in em and the store gave them to me because they weren't legally allowed to sell them.
i have found new aircraft stripper works best in direct sun light when it is in a spray can. just what i found
Was that a toyota u were driving in!!!
I am doing a Fox body 86 project I will install a 3V 4.6 I have the harness computer saw what I need is to fix the harness who can repair it Thanks
Just painted mine the exact same color, hahaha
@S550_zay
2 жыл бұрын
Is it still holding up?
@thefoxchamber
2 жыл бұрын
@@S550_zay so far still good
I’d paint those engine pieces inside the garage or basement with a mask 😷 on. Since it’s Spring time. Theres a lot of pollen in the air and it will get into the fresh paint 🎨 job.
That oil pan turned to a pita .. lol
i would have gave the sandblaster guy $20 to take care of that oil pan for me... nothing worse than being aggravated by such a simple task not to mention the cost and clean up you are already in it for.
Bought a set of phone dial wheels yesterday someone painted them grey I'm going to take paint off clean them up get a new set of lug covers and throw a set of Goodyear st white letters on them. Plan is to run them on my car temporary then sale them at a swap or something. I have to 10th anniversary cobra on the car now but I plan to 5 lug the car and we are building my sons 83 vert right now so the 10th anniversary wheels are going on the vert. Then when that cars done and we build mine i will 5 lug and buy new wheels for mine. I wanted the same set up as anniversary wheels in a black face torque thrust style but after seeing the wheels u went with I'm kinda in between the wide and wider look or the skinny fatty look like you did. My anniversary wheels are 9 inch front and 10 inch deep dish rear. What u think bud. It's a hatch lx like yours.
I'm getting dizzy. LOL
Why didn’t you just have the pan bead blasted with the rest of the parts? Would have saved you a bunch of time and messing with it!
I prefer a different kind of stripper.. one that works hard for dollar bills
u need a bigger garage,
Where is your wife's mustang ? ? That wasn't a Blue Oval in your garage !
I will say that in the driveway on a set of 70 year Gramps wooden horses 🐴 the cardboard on a couple a 50-60 year old oak boards a painted by the Old Man 🥹😐, #theoldmanisme.!!!! 😞😢
Aircraft stripper of today is total junk does not do anything worthwhile I’ve been using the below product to strip my 68 Torino down to bare metal it does not warped the metal at all and can be bought on Amazon. 5 Pack - Black Hawk Easy Strip Discs Clean and Remove Paint, Rust and Oxidation
I would have bought a new pan