I just did my son's Fox without any cutting tools on his 86. I had an issue with putting the top bushing on the upper hinge the way the video shows it. So I ended up just setting in the bushing with a big punch and a hammer. Those were my main tools. A jack and jack stand we're also used and a flashlight. 🔦

We do these at my shop and pull the front fenders. Takes longer but less of a headache. When doing it like in the video, the hinges and the doors get scratched.

I changed the bushings and pins on the drivers side last weekend. I did it all myself and it took me 5 hours. Hardest part was getting the bushings in the hole.

@cjponyparts

4 жыл бұрын

That usually is the tough part, having an extra set of hands goes a long way when doing that.

@rickyasadoorian7235

4 жыл бұрын

Fun

@alexisjorge3044

2 жыл бұрын

i realize it's kinda randomly asking but does anyone know a good website to stream newly released movies online ?

@ridgespencer9671

2 жыл бұрын

@Alexis Jorge flixportal :D

@alexisjorge3044

2 жыл бұрын

@Ridge Spencer thanks, signed up and it seems to work =) I really appreciate it!

Nice video on how to scratch up your paint job!

This thing beat my ass, took me all day for two pins scratched everything up, if you dont have a good rotary tool, forget about it.

@dntlss

3 ай бұрын

When it comes to these cars i have done just about everything on them and doing door hinges is something i detest with a passion and everytime i have done them i have done them with a buddy!! couldn't imagine doing them alone, you deserve a cold beer for sure. My favorite ones to do are on convertibles,on a hardtop you have the door frame to hang on to but on the Verts that damn door is just flopping around,lol,you need to put a lot of masking tape on your door edge next time that way you dont scratch it much.

Great. Now I need to spend $40 for "some sort of cutting tool" to finish installing my $5 part. I tried cutting off the head of the top one by hand and punching it through, but no luck. The stock ones are a bear. Highly advise cutting them in half like they show here.

Bill, i had the impression these rollers they sell these days are made of some kind of phenolic material,weren't the originals steel?

Yeah when he just pushed the lower bushings in with one finger, I knew someone had waited too long or didn't install the previous replacements correctly. Because the bushings is not supposed to rotate ... The little teeth are there to hold the bushing stationary. if you haver to, just put the bushing in a vise and squish it ever so slightly. and remember to chamfer the edge so it will center itself in the hole again. Also, if you have a engine hoist, you can use it with a strap through the window frame to hold the door up while you work and realign...

Where is that single vent gauge pod from? I need that.

Damn what camera did you guys use

How about coming out with a door pillar patch panel

I tapped the top bushing in just like on here but the pin wont slide out now its hitting the door

Have y'all replaced the heater core on these 87-93 cars yet?

@Zerogivengarage

7 жыл бұрын

I plan on shooting one of those in the next couple months.

So if it doesnt have a cotter pin you will have to cut it out ?

@cjponyparts

6 жыл бұрын

That is the easiest way to get it out if it is the stock pin. - Bill

Do you know where I can get the over sized bushings? My new lower bushings keep falling out and I still have some wobble on my door😊

@faststang85

9 ай бұрын

Weld the hole up and drill out

@quarans08

3 ай бұрын

LMR is where I got mine

Does anybody know what the color of this Mustang? Please let me know!

I've been trying to find a new passenger side door for my 89 coup. Does anyone know where I can get one? Don't tell me to google it cus I've done that

@rickmoyer5929

8 жыл бұрын

+hardy Mcbride (awbid) No one makes a new door. You will have to find a used door. Try any local junk yards or craigslist.

@captainhowdy9557

5 жыл бұрын

Hardy McBride ebay ..... or junk yard ......

U guys make this look way too easy. How long did it really take. This is probably the worst job I’ve done in a long time

Lol this was harder than it looked

Is this only for fox body ? I have an LX.

@dntlss

3 ай бұрын

an LX is a Foxbody.

It must be the viper blue color. Please help me to find out what this color is!

@cjponyparts

Жыл бұрын

It was custom painted before the owner bought it so we have no clue what the color code is. Sorry.

@matrixbikes

Жыл бұрын

Thank you!

After watching the whole video I'm wondering why you can't just do one hinge pin replacement at a time..I fail to see the reason the door has to be pulled away from the car.

@k129h8

4 жыл бұрын

Ken Mount good point

@rickyasadoorian7235

4 жыл бұрын

You will never get the bushing in or out

@kenmount294

4 жыл бұрын

@@rickyasadoorian7235 I already did it..successfully, but thanks!

@sav22rem22

3 жыл бұрын

@@kenmount294 So you managed to do it without pulling the door off? I’m about to tackle this

@dntlss

3 ай бұрын

@@sav22rem22yeah, hes got a magician learners permit,thats how you do it.

What color is that mustang

@MustangsbyMatt

7 жыл бұрын

Blue

@LotusD2

6 жыл бұрын

looks like a Royal Blue, color code is LA

Hour to an hour and a half my ass.

Every heard of a brass punch? Rofl