Resin like to seek it's own level , that's why you get those dips in your resin as it dries. You can get Doming Resin and it will prevent that from happening.

what type of laser do you use? co2, fiber, or diode laser?

thank you for idea

At this point I’m painting some backgrounds white and gonna put photo on top of that and see if it’ll work

I just bought my supplies to start this type of project after seeing your post on Instagram! I am so excited. What is the laminate sheet you talk about instead of doing the UV resin? Thanks for the inspiration! I am a teacher and can't wait to have my middle school students make some projects.

@TheFreckledCraftsStudio

2 жыл бұрын

Yaaay! Awesome. When you make them, please dm me, I want to seee! 🌸 here’s the link for the laminate sheet. * Laminate Sheet/Roll - amzn.to/3EnwXim

hello, please help me, i heat press the acrylic sheet, but the picture become transparent. how to become like your not the picture is not transparent??

Hey there I love your videos. I did try to do a test with infusible ink on clear acrylic. The ink took but it looks like there was residual left from the masking? Did you have that experience.

@TheFreckledCraftsStudio

2 жыл бұрын

Hey, thanks! Appreciate that. I have never used infusible ink so I really wouldn’t know. I used my converted sublimation printer (Epson Eco-tank). I heat press it at 400 degrees for 40-45 seconds. & When I peel the paper, I only have some paper that stays on the acrylic which easily comes off with warm water, some soap and a a tooth brush. Other than that, I wouldn’t know, friend. 🌸

Did you have any issues with the acrylic warping? If so, were you able to fix them?

@HeavenLeeMadeOnEtsy

Жыл бұрын

if you find your acrylic warping, you can put it under something heavy as it cools , then run it under the water to remove the paper

@TheFreckledCraftsStudio

5 ай бұрын

Slightly. Especially the white acrylic. But I put something heavy and flat on it to avoid warping.

Hello, what kind of ink you used? pigment ink or sublimation ink?

@webtrekkeruk2487

2 жыл бұрын

Warping is a problem as heat-pressed acrylic is very soft and bendy. I used to place the printed acrylic immediately between two sheets of tempered glass with a weight on top until they had cooled down. Be careful if you use anything other than glass as the surface of the acrylic will retain the texture of whatever you place on top of it.

@TheFreckledCraftsStudio

5 ай бұрын

Sublimation ink

can you use any acrylic to do this ?

@TheFreckledCraftsStudio

2 жыл бұрын

Hmmm… I researched to make sure I was right on this answer. I found that as long as the acrylic is not ABS plastic (which can melt) can be heat pressed at high temperatures- and make sure the acrylic sheet is thick enough. 1/16 of an inch and higher.

@jasongiles1191

2 жыл бұрын

@@TheFreckledCraftsStudio ok thx for that 👍👍

@TheFreckledCraftsStudio

2 жыл бұрын

@@jasongiles1191 you’re very welcome friend!

@webtrekkeruk2487

2 жыл бұрын

Use 'cast' acrylic and not 'extruded' acrylic.