Very nice job!👍🏻

@MarshallSmart

2 жыл бұрын

Cheers :-)

Good info... thanks

@MarshallSmart

Жыл бұрын

It's a while since I did that, I have the manual on my KZread if you want to look at it follow this link. kzread.info/dash/bejne/p2mNzbSfqcrYg5s.html&ab_channel=MarshallSmart. Or if you go to my Flicker where you can down load each page. www.flickr.com/photos/dino60/51365754257/in/album-72157719709246005/ Still have the 4 new single O'Ring liners as I thought it was a 1955 block. Should have checked casting No . M 😀

Hi, where did you buy the engine rebuild kit from and have you had any issues with it, Thank you

@MarshallSmart

3 жыл бұрын

You can get them from Agriline or old 20 parts co. Count the seals with liner out. 1953-58 single seal 58 on twin seal. My tractor had a service block fitted so the parts were 55 but the liners were for 63. Have a set of 55liners single seal left over M

@MarshallSmart

3 жыл бұрын

Agriline supplied the kit. Only issue was the bairings some were scratched. Just bought an other set. Had wrong liners as block was changed 1963 block. M

Hi Marshall, I bought a Super Major with a seized block due to the oil pickup blocked. It looks like the block has been damaged on the lower end. Do you know where I can get the specifications of the block so I can possibly have it machined?

@MarshallSmart

3 жыл бұрын

I would try Bundy Bare at www.Queenslandtractors.au he’s worked on a lot of tractors and has a machine shop. You can download the manual from there also Marshall

@user-fv6zf8hg6x

3 жыл бұрын

@@MarshallSmart Thank you very much Marshall! I will give that a try

@MarshallSmart

3 жыл бұрын

@@user-fv6zf8hg6x Good luck M

good

Where to get engine parts for Fordson 592e?

@MarshallSmart

2 жыл бұрын

This company post abroad this is where i got most of my parts for major. agrilineproducts.com/ford-fordson/fordsonn. Or Mayhill have some parts Agrilline don't www.mayhilltractors.com/fordson. good luck M :-)

que número de motor es

@MarshallSmart

2 жыл бұрын

Não tenho certeza do que você está perguntando. Ele se traduz para o inglês como o número de motor. Você quer dizer o número do cilindro ou o número do motor? Marshall