Ford Sierra Pinto Turbo
Автокөліктер мен көлік құралдары
Ford Sierra turbo with stock 2.0 Pinto engine. Running 9-10 PSI boost. Enrichment from extra 370cc injectors set to trigger with pressure switches. Good competitor to stock Ford Sierra Cosworth :) Dynoed to 213hp/355nm @ 0.78bar boost. 100% budget project. Less money, more fun!
Пікірлер: 163
Nice to hear. Everybody should have a friend like him.
Wow nice car ! Driver seems very talented too - "a natural"... Keep up the good work!!
Stock Type-9, 5-speed. Works like charm !
Great piece of budget building there! ....i bet you can have some serious fun in that! Fantastisk! ;)
Beautiful! Job well done.
Четкая тачка получилась, завидую, класс !!!
@joululli Haha.. dunno. 101hp original.. around 180-200hp.
good video man !!!, a fantastic car !
any changes to timing on boost? if so, how:)
@Stianlokkeberg Japp, basic och det fungerar bra :)
@1222nap Stock ECU and ignition yes. But I build my own enricher, that's triggered with two pressure switches.
what kind of pressure switch do you use?
Ser ut att gå riktigt najs! hade ni satt dit 2 extra orginal spridare till? hade tänkt bygga lika på min 240-88 med b230f vad tror ni?
Well, point is that this is a budget car, "most bang for the buck" type. And pulled out 213hp from stock 100hp is good for this kid of money, even though my weld looks like shit hahaha :) Look at my other movie, of this sierra, running in the dynos.. you can clearly see how bad i welded haha! I run standalone ECU's on my other car projects, that are more serious done :)
what fuel was it using? can u run standard unleaded?
De två lamporna till höger, vad står dom för? Markera att extrasprutet jobbar?
The differential is welded. Dynoed it to 213hp/355nm @ 0.78bar boost.
What turbo do you use? I am about to buy an mk1 sierra with th same engine as yours and I want to make the same thing as you, put in a turbo and stripe down the entire interior. Thank you very much.
No modifications on the clutch/rest of the transmission? If so, how long does the clutch last?
WITH GASOLINE 95 AND 98 HOW MUCH POWER ?
Where did you got the pressure switches? I always wanted to build a car like this.
did you have to lower the compression
could you send me how did you got the extra injectors and the pressure switch intalled?
AWESOME!
asså ni är så jääävla sköna fan va bra :')
It stock ecu without tuning again?
What is meant by E85?
I'm going to do the same with my cologne V6 2.4i . I don't find pressure switch...
now thats what i like .... i have a pinto 2.0 . 205 block in my vw t25 and looking to tune / upgrade it to this standards do you have any pointers on where to start first ? mybe fit efi first? all help / pointers will be appreciated . thank you .
hur mycket kostade det ungefär?
Say around $350 USD. It ran on 352cc injectors in fuelrail, and Volvo 740 K-jet fuelpump on E85. + 2pcs 370cc extra fuel injectors. Very good ratio cost/fun :-)
Also what turbo are you running on this ??
No, compression ratio is pretty low by default in Pintos. Together with E85, it's a Win Win :)
Visst fan är det ängelholm?
Är bilen till salu? :)
You are using Type9 gearbox and not MT75, right?
vad blev kostnaden på den? :D
Vad gick kalaset på ? :)
how much did it cost to build it? I really would like to know - quite inspiring + how much fuel does it need now? ;)
What gearbox?
de är den som ligger på blocket nu va? :D fan att man inte har några pengar :(
thats class 👍👍👍
@joululli HB?
Awesome car, do you have powersteering?
Veldig bra bygd! :) Men e85 på uåpna motor ? Da ødelegger du jo alt av pakninger
ser riktigt skoj ut
Please pm me that budget items, what u use
is it running again today ? No problem ?
What is the turbo ??
Saab 9-3 / 9-5 turbo. TD04-15T
IS IT reliable
Bra video forden gick trevligt ^^. En offtopic fråga vilken klocka har kamera mannen? ser fin ut :)
have same sierra just without turbo in it and a bit difference is that your's is sedan and mine is estate :)
are you running stock ecu and ignition? maybe there is project progress written somewhere? nice car, just need better suspension :)
e85 is a fuel type it contains 85%ethanol and 15% gasoline
Cant remember, but its the stock gearbox!
OI! (as the instrument panel has fallen out of the cockpit) nice :)
Ofcourse you can weld good even its a budget car...
6:00 "fan vad kass bil"
Tack men nej tack! :)
4x4 ??
how did you make it run E85 please ? mine has carburetors, so i think i'll need tu upgrade it , but some says that 2.0 DOHC cant run E85
@bestofblocket
8 жыл бұрын
All engines can run E85, It's just a question about how much fuel you feed them.
Hello dear is this a car for you? I'm looking for this car's engine
Goes well
It's running on stock ECU I think.
Herlig!
Original pressure plate, upgraded lamel. Sinterlamel.
He's a slow thinker, but he's my friend.
That manifold is exceptional. Is there anymore?? I need it to finish my project:)
@69censu
3 жыл бұрын
I have one extra if you want
@denizhanozgun5247
2 жыл бұрын
@@69censu do you still have it 😅
@nobbecool Det kan du hoppa upp o sätta dig på att det är! :D
any one recommed how to turbo a 2.0 v6 cologne is there any kits avaliable
@cookiedancedtcd5315
5 жыл бұрын
Bilal as I know of, there isnt. I’m in the same boat as you with my 2.3 Capri. Best would be to go for a pinto or a 2.8 efi / 2.9 cossie for more power
@theeverythingguy8532
4 жыл бұрын
Well, you can always make your own manifold and weld everything up.
Hey man, nice video, watched it like 20 times already :) Did you use type9 or mt75 transmission? Also, if you ran Mt75, what flywheel/clutch? (220-240?) THanks!
@bestofblocket
8 жыл бұрын
+cs Man (Mancs) Damn, 20 times! You really have to get a life mate. Original gearbox, dont know the type of it sorry! Stock flywheel with original pressure plate but a sinter disc. Happy new year!
@mancsdrift
8 жыл бұрын
+bestofblocket that was a fast reply haha. Yeah Im researching for my own project :) Ah to bad you dont remember the tranny, im not sure how much the Type9 can handle. Thanks again for the superfast reply, and happy New year!
@Vixhall
8 жыл бұрын
+cs Man (Mancs) Look like it has a Type 9, the reverse is on the upper left. On the MT75 it's on the bottom right.
@mancsdrift
8 жыл бұрын
+Vixhall Yep the shifter + boot is also type 9 so it should be that! Thanks!
Hade jag kört bensin hade hela motorn varit sönderspikad för längesen.
Hi! Can you tell me, which type of pressure switch did you use ?
@bestofblocket
2 жыл бұрын
Just normal pressure switches, fully adjustable from 2-24psi. Only thing I know, it was 11 years ago 😃 the company that i bought them from is no longer active.
@wowhunterhabbo Visst fan stämmer det!
HB?? :D
vill ha strippensäsongen 2012 nu när jag såg den
nice from stock pinto..
rudee car mate
It's still alive? :P
jep..165 nakit ja rattia vispaten ni saa sen linkkuu..voi jeesus
@eliasairola7106
3 жыл бұрын
Mitä sä täälä nyt touhotat
och turbo sierra jättää sen
Is it still running?
@zubuxstein
5 жыл бұрын
ja ja ...
6:02 whats happend? O_o
eran sierra går så jävla bra och jag är ett fan av sierrer så jag gillar denna
what kind of ECU and injection are u running. im pretty sure its not standard :D
@bestofblocket
10 жыл бұрын
Stock ECU, read describtion for specs! :)
@Diesel8290
10 жыл бұрын
bestofblocket really! Im so doin this with a sierra. Wat kind of clutch u runnin a paddle clutch and also how did u get around the air flow meter :-P
@bestofblocket
10 жыл бұрын
***** The airflowmeter is there for a reason if you run stock ECU. Used stock pressure plate and a sinter disc.
@Diesel8290
10 жыл бұрын
And one more question :-) would this little Engine take this abuse foe long :-D
@doburnout1
8 жыл бұрын
+bestofblocket are the stock ecu's able to be Dyno tuned?
@simcaP60fan Stämmer
god bless team bonnmeck
vill ha begär på denna! :D
???
good job u video ur sierra NOT UR SELF lol. but nice pinto spec ;)
What about pistons and transmission? AFAIK the stock Type-9 transmission is not strong enough to handle this much power, MT-75 from twinkies are much more strong. I have little information on stock pistons, are they suited for this?
@galingong
9 жыл бұрын
also which turbo model did you use?
@bestofblocket
9 жыл бұрын
galingong 15T turbo from Saab
@galingong
9 жыл бұрын
bestofblocket thank you for your answer. so you've left stock pistons in?
@bestofblocket
9 жыл бұрын
galingong Yes. The engine was 100% stock, unopened.
@galingong
9 жыл бұрын
bestofblocket That's rad, I'm going to try this. You've mentioned that you've used extra injectors - if I understand correctly, you've left the stock injectors in as well. Does it make sense to swap the stock ones to larger ones or is it better to leave them in and have 8? I'm going to have custom EFI anyway.
Everything ok but the suspension :))
*My summer car be like*
indeed, >14,7 is lean,
@Strikehard92 Haha.. en Citizen :)
HB = Horse Bower but i mean Power = HP.. :D u know.. :D
har gaft en likadan men den ladda 1.9.... :)
haha så går den ut här i processkärlet
6:26 he did die !!!!!