Ford Ranger Injector Cleaning Before & After Results - Liqui Moly Diesel Purge

Автокөліктер мен көлік құралдары

DIY Injector cleaning on a Ford Ranger , Everest or Mazda BT-50 with Injector Data Results from before & after using the Liqui Moly diesel Purge.

Пікірлер: 33

  • @killawattgarage
    @killawattgarage7 ай бұрын

    Great video. I typically don’t use cleaners and additives but I love the Liqui-Moly products as they always make a great improvement to the Rangers injectors.

  • @vonlogan1
    @vonlogan17 ай бұрын

    Thanks so much for making this video! I asked you about this very thing a few months ago. The only other videos I could find were from the Philippines and I couldn’t get a clear understanding of where and how to connect the hoses.

  • @ogilazarov5975
    @ogilazarov59757 ай бұрын

    Very nice video (as always). I have used same additive, but following the instructions I have add it to 20 liters of fuel - there is no improvement/change at all. But next time I will follow your way of usage. Once again - thanks for your sharing.

  • @donbrashsux
    @donbrashsux7 ай бұрын

    Excellent I will try yr method with filter as it seems the best way to do this procedure

  • @Edward-kv8re
    @Edward-kv8re7 ай бұрын

    great video with great results. i would do it slightly differently by turning off the engine to soak the injector for a while with the cleaner fluid, then turning back on when you need to drive. but for video purposes, great. for maintenance purposes, instead of video, you can just pour it into your tank

  • @Josh-oc3lf
    @Josh-oc3lf7 ай бұрын

    My ranger had low power and the throttle body was replaced, it went back to normal. Have you ever replaced your throttle body and did you know it could affect performance like that?

  • @user-nj4jj6rl7g
    @user-nj4jj6rl7g5 ай бұрын

    What App are you using? I cant find one with independent flow sensor.

  • @harrisongauci2487
    @harrisongauci24877 ай бұрын

    Hay mate do you have to do an oil change after?

  • @Angrysagamer
    @Angrysagamer7 ай бұрын

    Hey, I have a question. If the EGR is blanked off but the ford is not reprogram to tell the system it is blanked off, will that cause issues?

  • @jareddiprose6785
    @jareddiprose67857 ай бұрын

    Great videos mate, really appreciate them! Do you think that the Topdon Topscan makes Forescan reduntant, or do both have their place. Just trying to find the best scan tool for my 3.2 2016 ranger.

  • @abdautomotive

    @abdautomotive

    7 ай бұрын

    i think topscan is preety good, but forscan is more in depth

  • @pierreduplessis8962
    @pierreduplessis89626 ай бұрын

    hi wat is the name of the scanner

  • @thebeegmane2280
    @thebeegmane22807 ай бұрын

    Hey mate what symptoms are common with injector failures on the p5at, mikes started making a knock noise over 2k rpm drives awesome still but when underload over the 2k rpm its start kncoking still idles fine to

  • @abdautomotive

    @abdautomotive

    7 ай бұрын

    i would say injector knocking is a common symptom, check my videos for a injector buzz test.

  • @sootyranger
    @sootyranger5 ай бұрын

    This might be a pretty noob question, But the BT50/Rangers in PX 1/2/3 versions are 5 cyl. not 4? Does the topscan tool only register the 4?

  • @ncba

    @ncba

    4 ай бұрын

    The 3.2L has 5 cylinders while this is the 2.2L with 4 cylinders. Forscan registers accordingly

  • @Crazy_Dave
    @Crazy_Dave5 ай бұрын

    Isn't that a feed and return fuel system? In which case having the engine on idle that moly will go straight to the tank and very little will actually get to the injectors.

  • @abdautomotive

    @abdautomotive

    5 ай бұрын

    watch the video again taking note at time stamp 5:07

  • @linghaib
    @linghaib6 ай бұрын

    add liqui moly injector cleaner direct into fuel filter when replacing new fuel filter, the same idea.

  • @TsmsTTsm
    @TsmsTTsm7 ай бұрын

    I have a problem in my Ranger xLT-2017 ( I could hear a ticking sound in the cabin even after turn off the engine) how do I fix that ?

  • @linghaib

    @linghaib

    6 ай бұрын

    same

  • @captainotto

    @captainotto

    3 ай бұрын

    That could be the cabin air recirculation actuator/flap. It's very common. kzread.info/dash/bejne/np94mdusZaaZgLg.html

  • @Paulroach6

    @Paulroach6

    24 күн бұрын

    I had this problem for years and over time and after my LED lights giving me so much grief and dead car batteries it was the air con system blend door actuators under dash. I had so many auto Electritions struggle to solve this until finally a mobile guy found it. Replaced all 4 and no more dead batteries and no more faulty led head lights. ( also he said the faulty parts were draining my batteries as they kept drawing 3 amp even when car was turned off ). Not a cheap fix but better than buying batteries too regularly and driving around with 1 headlight.

  • @jimjasper9851
    @jimjasper985124 күн бұрын

    The test is invalid if you do not follow the instructions, next!

  • @philippgrau9499

    @philippgrau9499

    15 күн бұрын

    What instructions? On the bottle you have: In the tank, for precaution. Or best to get it 100% pure into the motor, by using not the fuel line but directly the surge fluid. Or they also tell you on the website to do it like this, just put it in the filter.

  • @Angler233
    @Angler2337 ай бұрын

    Where is the 5th cylinder?

  • @joeblow1711

    @joeblow1711

    7 ай бұрын

    I was gonna ask the same thing lol

  • @rhaynes1633

    @rhaynes1633

    7 ай бұрын

    his is obviously the 2.2 and not the 3.2

  • @joeblow1711

    @joeblow1711

    7 ай бұрын

    @@rhaynes1633 that’s not a real engine so it doesn’t count

  • @mwnciboo

    @mwnciboo

    7 ай бұрын

    ​@@joeblow1711 2.2 is a superb Engine - shifts the same towing mass - at a lower fuel consumption.

  • @SoWhattv01

    @SoWhattv01

    6 ай бұрын

    It’s a 2.2 so only four cylinders

  • @faith9751
    @faith97515 ай бұрын

    You say 0.03 is an improvement? Waste of time..

Келесі