How to program key and a new pats system from junk yard..
Жүктеу.....
Пікірлер: 71
@d.jswaheely407 жыл бұрын
Thanks for nothin. Could have at least shown what you did..
@longhairdontcarealwaysslay62325 жыл бұрын
BAZE CHARLSE - So Put You Key in Turn The Ignition On (As in twist it forward towards the dash) then twist it back towards you and remove the key (do this 3 x ) ….right???
@rudyapolonio70496 жыл бұрын
Ford should recall this kind of issue... And no cost to the owner... Just filled up gas and my theft light stays on then truck got stuck on the gas station.. Cranks but no start for my 1999 ford expedition.. Now truck is on the driveway after 2 mechanics and locksmith...
@williamhurst9253
Talking it is one thing but showing it is another
@abelvalle6188
Man i was about to tear my ignition cylinder up, and throw a new one in...now i dont know
@geony937 жыл бұрын
it works but my problem is that it unprogrames itself Everytime I turn off..I have to start the turn on turn off procedure from step 1 again
@helenaragon14 жыл бұрын
Thank you. You just saved me $$$$$$ my truck was almost stolen and to boot I lost my keys. I went to the junk yard too but had no clue on how to program it. Thank you thank you!!!!😋
@SimEon-jt3sr
Transponder xtal is right next to ignition switch. Key has xtal in it too. Back when i knew a guy who removed both and it worked. Maybe a 2001. Idk. At your own risk. Just fyi. Not saying it's gonna work on your model. Just fyi.
@joeysimmons2779
This did not work on my 1999 ford ranger
@bobbyedwards11258 жыл бұрын
did you get a new key
@sneekydee5446
This shit happened to me recently. Thought it was the damn fuel pump or hell even the fuel driver module. Turns out it was the theft light blinking I put the key in the ignition and left on the acc position for about five minutes and the theft light quit blinking prior to I also used the remote to unlock the truck just to be sure it was unlocked. As soon as I did this about five minutes after as stated the light quit blinking and sure a shit she fired right up. Definitely a strange experience but glade it didn’t cost me a testicle😅
@markray27525 жыл бұрын
Thank you so much. This worked for me. Got a used transponder from a junk yard and using the original key the truck came with and the engine fired right up.
@samcintron017 жыл бұрын
This worked flawlessly for me on my Ford Explorer. Thanks!
@MegaCougar429 жыл бұрын
Thanks this sound Hella helpful I thought about it before but kinda questioned my self, now I just gotta find out where tf the back of the wires plug into hahahaha
@olds3945 Жыл бұрын
Great job ford! Even the legal owner (me) can’t start my truck.
@bc205AL6 жыл бұрын
Reckon it would be the same for a 1999 mustang convertible?
@user-ly1ty8hy8q
Did you matched the part numbers on the transceiver with the existing one?
@georgioocean76296 жыл бұрын
Oh yeah it was real basic not a problem I did what you said to do but I do with my original setup and and the theft is not light is not on. But it doesn't start
@roreyliljegren55286 жыл бұрын
When you go to the junkyard and look for the car does it have to be the same year car as yours
@MrzSaenz7 жыл бұрын
a did it matter if the year is the same on the part?
Пікірлер: 71
Thanks for nothin. Could have at least shown what you did..
BAZE CHARLSE - So Put You Key in Turn The Ignition On (As in twist it forward towards the dash) then twist it back towards you and remove the key (do this 3 x ) ….right???
Ford should recall this kind of issue... And no cost to the owner... Just filled up gas and my theft light stays on then truck got stuck on the gas station.. Cranks but no start for my 1999 ford expedition.. Now truck is on the driveway after 2 mechanics and locksmith...
Talking it is one thing but showing it is another
Man i was about to tear my ignition cylinder up, and throw a new one in...now i dont know
it works but my problem is that it unprogrames itself Everytime I turn off..I have to start the turn on turn off procedure from step 1 again
Thank you. You just saved me $$$$$$ my truck was almost stolen and to boot I lost my keys. I went to the junk yard too but had no clue on how to program it. Thank you thank you!!!!😋
Transponder xtal is right next to ignition switch. Key has xtal in it too. Back when i knew a guy who removed both and it worked. Maybe a 2001. Idk. At your own risk. Just fyi. Not saying it's gonna work on your model. Just fyi.
This did not work on my 1999 ford ranger
did you get a new key
This shit happened to me recently. Thought it was the damn fuel pump or hell even the fuel driver module. Turns out it was the theft light blinking I put the key in the ignition and left on the acc position for about five minutes and the theft light quit blinking prior to I also used the remote to unlock the truck just to be sure it was unlocked. As soon as I did this about five minutes after as stated the light quit blinking and sure a shit she fired right up. Definitely a strange experience but glade it didn’t cost me a testicle😅
Thank you so much. This worked for me. Got a used transponder from a junk yard and using the original key the truck came with and the engine fired right up.
This worked flawlessly for me on my Ford Explorer. Thanks!
Thanks this sound Hella helpful I thought about it before but kinda questioned my self, now I just gotta find out where tf the back of the wires plug into hahahaha
Great job ford! Even the legal owner (me) can’t start my truck.
Reckon it would be the same for a 1999 mustang convertible?
Did you matched the part numbers on the transceiver with the existing one?
Oh yeah it was real basic not a problem I did what you said to do but I do with my original setup and and the theft is not light is not on. But it doesn't start
When you go to the junkyard and look for the car does it have to be the same year car as yours
a did it matter if the year is the same on the part?