How to do the timing on a Ford Mazda 2.5 WL engine
Жүктеу.....
Пікірлер: 62
@simonyoung12653 жыл бұрын
First person I've heard explain this in a way I can understand..simple really..
@carburettorrebuildservice8964
3 жыл бұрын
Thank you.
@sammobro61172 жыл бұрын
Yep, you've helped me massively. Thanks mate!
@carburettorrebuildservice8964
2 жыл бұрын
i am glad i could help you.
@Sean-yr4xs3 жыл бұрын
Video is so self explanatory,👍 just dismantling the engine block to send of for re-boring and then the fun of rebuilding begins.thanxs for the info
@carburettorrebuildservice8964
3 жыл бұрын
Please let them check the block, they tend to pull, also remember to replace the head bolts. i am glad you liked the video.
@crimescene3448
7 ай бұрын
what did you mesn pull
@samoelerabohome35442 жыл бұрын
Thank you the video was helpful
@AkoKaipu4 ай бұрын
Thanks brother for the timing it really helps me..
@carburettorrebuildservice8964
4 ай бұрын
Pleasure, thanks for watching my videos.
@leonnatala47762 жыл бұрын
Great video, thanks.
@henryodudu4802 жыл бұрын
Great video. Really helped
@carburettorrebuildservice8964
2 жыл бұрын
I am glad it helped you.
@jdmcarandmotorcycle2 жыл бұрын
Thank you from Seattle Washington
@carburettorrebuildservice8964
2 жыл бұрын
Glad you liked the video, from Pretoria South Africa.
@alexpittendrigh4600 Жыл бұрын
Excellent work!
@carburettorrebuildservice8964
Жыл бұрын
Thank you
@crimescene34487 ай бұрын
Hi, thank you so much for the video. I need help thouggh, what is the process around 30°c before tdc. How is it included in the timing process
@chinhho55912 жыл бұрын
You try to give the video more brightness it will be great if you do
@marktgsxr2 жыл бұрын
Is it possible for the injection pump gear to loose it's timing if only the pump is removed? We have one that has had it's pump rebuilt but now seems to have injection timing miles out and won't run... I thought the gear was captive and couldn't loose it's position?...
@LucasAlfa.6 ай бұрын
Life savior !
@carburettorrebuildservice8964
6 ай бұрын
glad the video helped you.
@arthurcole29432 жыл бұрын
brilliant footage and explanation
@carburettorrebuildservice8964
2 жыл бұрын
thank you
@mashudumulaudzi918 Жыл бұрын
I doubt mine is done this way, I bought a new cylinder head but it still over heating though radiator is not blocked.thanks I have to save this in future cases.
@luckylook71592 жыл бұрын
Geat content. What would couse a oil leak on the gear housing where the injector pump(diesel pump) connects to?
@carburettorrebuildservice8964
2 жыл бұрын
it has a oil seal on the pump, it could also leak on the nuts that hold the pump in place.
@kadenmenzies92599 ай бұрын
We’re does the crank have to be set wen installing the gears
@lenin14223 жыл бұрын
Valve overlap its called the transition between exhaust and admition stroke
@carburettorrebuildservice8964
3 жыл бұрын
Thank you, and thanks for watching my video
@franciscoformas38282 жыл бұрын
Is this a interference or non interference engine? Thanks.
@user-lv6ci5tb5t Жыл бұрын
Was trying to check the timing marks on my wl 2.5 turbo after pump service, first don't seem to see the timing dots on crank pulley and at the same time the marks on the gears are not lining up. What should i do? Coz .my engine was was vibrating a lot after someone rebuilt it.
@carburettorrebuildservice8964
Жыл бұрын
Hi, the dot that should be on the crank is lined up with the key way in the crank. that should be your starting point.
@user-pq1rt1de7q10 ай бұрын
What happen all timing mark in position
@peterjambo7600 Жыл бұрын
I have stuck lockpin at the diesel pump gear how do I remove the gear without removing the pump
@carburettorrebuildservice8964
11 ай бұрын
you would need to make yourself a small puller.
@beonhuneb91752 жыл бұрын
Thanks
@carburettorrebuildservice8964
2 жыл бұрын
Thanks for watching.
@gracedinamling21123 жыл бұрын
wat to if there are no timing marks on the injection pump. help pls tnx..
@carburettorrebuildservice8964
3 жыл бұрын
are you talking about the gear at the back or the pulley for the cam belt?
@gracedinamling2112
3 жыл бұрын
yes at d back idid not put marks at d back of d pulley i tink its twisted n den i got lost.. i can not start my engine😩😩
@user-lv6ci5tb5t Жыл бұрын
My engine is rattling a lot after servicing my pump.
@horacesimpson25752 жыл бұрын
WL command real time mark
@alexmalawae8415 Жыл бұрын
timings marks are lined up ok, but not the pump gear, how can I line it up?
@AkoKaipu
4 ай бұрын
Timings marks are lined up from tdc to camshaft but not the pump gear, how can I line it up?
@johnvanniekerk72542 ай бұрын
What if the crank gears don’t have marks
@carburettorrebuildservice8964
2 ай бұрын
John thanks for watching my videos, please look 54 seconds into the video. You will see the marked tooth are in line of the middle of the key way
@yuliejohn7096 ай бұрын
What tdc stand for?
@carburettorrebuildservice8964
6 ай бұрын
top dead center
@eric_francois_enslin Жыл бұрын
Hi There. Did you do a rebuild on your motor?
@carburettorrebuildservice8964
Жыл бұрын
Hi, i did it for a client.
@eric_francois_enslin
Жыл бұрын
Hi. OK thank you. What area are you in?
@carburettorrebuildservice8964
Жыл бұрын
@@eric_francois_enslin Pretoria
@eric_francois_enslin
Жыл бұрын
@@carburettorrebuildservice8964 Great stuff. How can I get hold of you please?
Morning, is there a way I can call you? Where about are you?
@carburettorrebuildservice8964
11 ай бұрын
Pretoria, Whatsapp 060 654 6966
@baidillahdillah1005 Жыл бұрын
This is so big
@IEKAPSTONE2 жыл бұрын
Hi Thanks so much for the video it really help us alot 😊 Do you have a contact number will like to speak to you having some problems with my wl engine and the engineer is messing me around
@user-lv6ci5tb5t Жыл бұрын
My engine is rattling a lot after servicing my pump.
@marcussok6469
6 ай бұрын
Did you service oil pump or injector pump???. I hope it's an injector pump you mean , you were supposed to take your injector pump and injectors for service. Mostly rattling when idle is due to fuel starving, air in the fuel system or low fuel pressure or injector failure
Пікірлер: 62
First person I've heard explain this in a way I can understand..simple really..
@carburettorrebuildservice8964
3 жыл бұрын
Thank you.
Yep, you've helped me massively. Thanks mate!
@carburettorrebuildservice8964
2 жыл бұрын
i am glad i could help you.
Video is so self explanatory,👍 just dismantling the engine block to send of for re-boring and then the fun of rebuilding begins.thanxs for the info
@carburettorrebuildservice8964
3 жыл бұрын
Please let them check the block, they tend to pull, also remember to replace the head bolts. i am glad you liked the video.
@crimescene3448
7 ай бұрын
what did you mesn pull
Thank you the video was helpful
Thanks brother for the timing it really helps me..
@carburettorrebuildservice8964
4 ай бұрын
Pleasure, thanks for watching my videos.
Great video, thanks.
Great video. Really helped
@carburettorrebuildservice8964
2 жыл бұрын
I am glad it helped you.
Thank you from Seattle Washington
@carburettorrebuildservice8964
2 жыл бұрын
Glad you liked the video, from Pretoria South Africa.
Excellent work!
@carburettorrebuildservice8964
Жыл бұрын
Thank you
Hi, thank you so much for the video. I need help thouggh, what is the process around 30°c before tdc. How is it included in the timing process
You try to give the video more brightness it will be great if you do
Is it possible for the injection pump gear to loose it's timing if only the pump is removed? We have one that has had it's pump rebuilt but now seems to have injection timing miles out and won't run... I thought the gear was captive and couldn't loose it's position?...
Life savior !
@carburettorrebuildservice8964
6 ай бұрын
glad the video helped you.
brilliant footage and explanation
@carburettorrebuildservice8964
2 жыл бұрын
thank you
I doubt mine is done this way, I bought a new cylinder head but it still over heating though radiator is not blocked.thanks I have to save this in future cases.
Geat content. What would couse a oil leak on the gear housing where the injector pump(diesel pump) connects to?
@carburettorrebuildservice8964
2 жыл бұрын
it has a oil seal on the pump, it could also leak on the nuts that hold the pump in place.
We’re does the crank have to be set wen installing the gears
Valve overlap its called the transition between exhaust and admition stroke
@carburettorrebuildservice8964
3 жыл бұрын
Thank you, and thanks for watching my video
Is this a interference or non interference engine? Thanks.
Was trying to check the timing marks on my wl 2.5 turbo after pump service, first don't seem to see the timing dots on crank pulley and at the same time the marks on the gears are not lining up. What should i do? Coz .my engine was was vibrating a lot after someone rebuilt it.
@carburettorrebuildservice8964
Жыл бұрын
Hi, the dot that should be on the crank is lined up with the key way in the crank. that should be your starting point.
What happen all timing mark in position
I have stuck lockpin at the diesel pump gear how do I remove the gear without removing the pump
@carburettorrebuildservice8964
11 ай бұрын
you would need to make yourself a small puller.
Thanks
@carburettorrebuildservice8964
2 жыл бұрын
Thanks for watching.
wat to if there are no timing marks on the injection pump. help pls tnx..
@carburettorrebuildservice8964
3 жыл бұрын
are you talking about the gear at the back or the pulley for the cam belt?
@gracedinamling2112
3 жыл бұрын
yes at d back idid not put marks at d back of d pulley i tink its twisted n den i got lost.. i can not start my engine😩😩
My engine is rattling a lot after servicing my pump.
WL command real time mark
timings marks are lined up ok, but not the pump gear, how can I line it up?
@AkoKaipu
4 ай бұрын
Timings marks are lined up from tdc to camshaft but not the pump gear, how can I line it up?
What if the crank gears don’t have marks
@carburettorrebuildservice8964
2 ай бұрын
John thanks for watching my videos, please look 54 seconds into the video. You will see the marked tooth are in line of the middle of the key way
What tdc stand for?
@carburettorrebuildservice8964
6 ай бұрын
top dead center
Hi There. Did you do a rebuild on your motor?
@carburettorrebuildservice8964
Жыл бұрын
Hi, i did it for a client.
@eric_francois_enslin
Жыл бұрын
Hi. OK thank you. What area are you in?
@carburettorrebuildservice8964
Жыл бұрын
@@eric_francois_enslin Pretoria
@eric_francois_enslin
Жыл бұрын
@@carburettorrebuildservice8964 Great stuff. How can I get hold of you please?
@carburettorrebuildservice8964
Жыл бұрын
@@eric_francois_enslin 060 654 6966 whatsapp please
Morning, is there a way I can call you? Where about are you?
@carburettorrebuildservice8964
11 ай бұрын
Pretoria, Whatsapp 060 654 6966
This is so big
Hi Thanks so much for the video it really help us alot 😊 Do you have a contact number will like to speak to you having some problems with my wl engine and the engineer is messing me around
My engine is rattling a lot after servicing my pump.
@marcussok6469
6 ай бұрын
Did you service oil pump or injector pump???. I hope it's an injector pump you mean , you were supposed to take your injector pump and injectors for service. Mostly rattling when idle is due to fuel starving, air in the fuel system or low fuel pressure or injector failure
@marcussok6469
6 ай бұрын
Check your timing again