Ford Fiesta Instrument Panel Removal
Автокөліктер мен көлік құралдары
How to change replace install the instrument panel on a Ford Fiesta. This is a fourth generation, Mark IV. Years this applies to is 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002. Mkiv. Mk4.
Пікірлер: 28
just wondering could i fit an instrument panel which has a rev counter to the fiesta as mine does not have one (i have the same model as the one in the video)?
Hi Mark. Have you ever removed the complete dashboard? Do you have a manual?
do you know what model of replacement lights I need for the instrument panel. kind regards
Hi, can you make a video,"How to Change a Fuel Filter on Ford FiestaMK4" ?
Nice video,how do u know if the temperature is ok,i? Thanks
Need to remove an old door on mk4 f2f, help!!
Hi... Will a Ford Puma 1.4i 1999 Instrument panel (cluster) fit Ford fiesta 1999 mk4 1.3i? Both have mechanical speedo cables. Thanks
@orp.olly_
7 жыл бұрын
Mohamed Amer do you know if I could put a rev counter on my 1999 mk4 fiesta 1.3 endura e
@codykamminga9667
4 жыл бұрын
If they both look similar, ( both the same style) you should have no problem
any idea why my cluster wont come out, its a 98 fiesta looks the same style but despite having removed all screw the cluster wont pull out, feels like something is holding it from behind
@mrmegatrains
5 жыл бұрын
you may have a speedometer cable, refer to the haynes manual for more info on that
@henryfielding6961
4 жыл бұрын
@BeSt VideOzz the speedometer cable connects to the back of the instrument cluster with a clip and prevents it from being pulled out, best i can remember you disconnect the speedometer cable within the engine bay and feed some slack through the bulk head, be careful when you remove the cluster as there is some thin plastic on top of the cluster which is actually the electric supply for the dashboard illumination so dont make the same mistake i did and rip it . hope this helps
My check engine light don't come on in second position where would the light be to replace
@NerkMineRaiste
5 жыл бұрын
same problem
Done eveything, but after removing the 4 binnacle screws, it comes out so far then wont allow to come out further. Feels as if theres wires tugging, but cant see any. Any ideas? Thanks
@dominikdolezal5066
2 жыл бұрын
Same problem! Solution?
@adambillson7494
2 жыл бұрын
@@dominikdolezal5066 it has a speedo cable attatched to the back that you need remove. I ended up yanking my clocks and broke the cable lol
@dominikdolezal5066
2 жыл бұрын
@@adambillson7494 thanks for such fast reply. I just tried now and didnt get far. All i wanted was to change the green colored film below light bulbs which highlights the dashboard at night. So not really worth breaking anything
@dominikdolezal5066
2 жыл бұрын
@@adambillson7494 Buuut if you would share the secret with me on how to unclip that cable I would be happiest puma owner of all times
Is there any asbestos materials on these old fiestas?
@July-A7
6 жыл бұрын
Don't be obsessed with asbestos. Even if your whole car was made of asbestos, you'll be fine.
How long since you left Canada?
Can this be done WTHOUT remoning the wheel?
@ilkercolakoglu
11 ай бұрын
Just saw that u said "no need to"... Thanks!
Manik wathore
me pica el huevo
@manikwathore9675
6 жыл бұрын
Alfonso t nice
@eduardoespinoza5387
5 жыл бұрын
Chutas!!!!!