Where the hell am I getting them keys ive never seen them before 😂
@hatesTD2 күн бұрын
This is for 2015 Passat?
@DubbsGame3 күн бұрын
Mine wont go back up after i dropped the fob in water
@wingnut28933 күн бұрын
Wrong lighting.
@mikegalvin3614 күн бұрын
Thanks
@RacecarsAndRicefish4 күн бұрын
I'm trying to install a new undertray piece after driving for so many years without one. I'm thinking it'll be helpful for keeping air going the right ways in the engine bay now that my car has forced induction. unfortunately it seems like I have lost all the little mounting points over the years lol no fender liners and my front bumper is slightly hacked up on the inside for the intercooler thx for video though, at least I know I don't have the thing backwards
@alicobalt80965 күн бұрын
تغيير بطارية هوندا اكورد ٢٠١٢ ٢٠١٤
@soldrago48769 күн бұрын
Make sure you state where is the vehicle from because vehicles from United States and from England or British are totally different. Like the Ford Focus 2007 parts are located differently depending on the stupid engineers.
@a-aronkim168910 күн бұрын
Can confirm it was dark and cold
@NectarineC12 күн бұрын
Is there a 3rd high mounted brake light?
@Stickleback12 күн бұрын
the bracket that hold it together at the window, thread snapped, need one O/S same as if anyone has one.
@matthewmckee130712 күн бұрын
Very helpful, thanks 👍
@MrFreakenfast13 күн бұрын
Sick!
@Woodworkingwwoody14 күн бұрын
Wife told me earlier ,i gotta remove the front bumper to replace low beam bulb .😂
@zackssakwenandele133319 күн бұрын
Please can you help me by showing me the various bolts I have to untied to replace the v-ribbed belt tensioner of this your ford focus MK1.I am blocked and have to replace mine.
@zackssakwenandele133319 күн бұрын
Ford Focus Mk1 1.6 Petrol Auxiliary Belt Tensioner Pulley 98MF-3C631 CG 190115
@lilylittle968522 күн бұрын
Hell yes, this worked great on my JDM import, thank you!
@formicapple223 күн бұрын
I wish modern cars were like my old Morris Minor for repairs.
@NotYourArmy66623 күн бұрын
Pfft! Easy to adjust without this "lifehack" it is! Lame waste of time, your video is!
@20alphabet24 күн бұрын
That's not a "spanner". And the authentic Vise Grips of five decades ago don't have the same adjustment bolt your Chinese knock-off has, so this "tip" is only for those who shop at Harbor Freight.
@sydneysalvador525924 күн бұрын
This video just help me thanks
@Karaon25 күн бұрын
i award you no points bro but i still thank you for doing something and learning ppl. What i do i lock it too loose on a thing and turn it untill it's holding, unlock, give a bit more grip and lock again. fastest method i found and no guessing
@20alphabet24 күн бұрын
Pro tip right there. 👍🏻😃👌🏼
@justinshute572625 күн бұрын
If you’re using no name locking pliers they’re not vise grip. Also who needs this? Pathetic
@20alphabet24 күн бұрын
Agreed.
@GrimFowler26 күн бұрын
I was almost flabbergasted that this aint common knowledge, then i remembered that most men under 30 cant read a tape measure these days..
@theParticleGod23 күн бұрын
I've never owned a pair of Vise Grips that have that hole or a hex shaped bolt on them. I can't ever recall seeing any Vise Grips with anything like that. I guess it's nice to know that someone somewhere can do this, but it's no more of a secret trick than if I buy a car with secret compartments built into it and make a clickbait video saying "SECRET COMPARTMENT IN YOUR CAR THAT YOU NEVER FOUND!" Of course you never found it, because your car doesn't have any secret compartments. I never knew this trick because I've never been able to do it with my stuff.
@Patrick-MojoVitaАй бұрын
Great tip, used this on a 2002 Rav4, worked perfectly. Thanks Mark👍
@legoseller4496Ай бұрын
Beautiful.
@jacobborgwardt6546Ай бұрын
What year is this?
@BrentGossardАй бұрын
Nope, it doesn't work.
@ingbtcАй бұрын
Straight to the point 🎉
@finedayforlessugarАй бұрын
Thanks!
@bongjuiАй бұрын
2 questions. 1. How do you decide which part of plate you would make for earthing? 2. After earthing, only 1 light is on. What should i change?
@deniro2695Ай бұрын
Thank you!🖐🖐🖐
@richardroland4365Ай бұрын
"There's an eight millimeter bolt between the front bumper and the wing." My bumper got caught on a sprinkler head in front of a parking space while backing out, and several bolts and clips broke through the fibreglass. In this spot, I see on both parts a large 'oval' opening. Nothing threaded for a bolt. Ideas?
@lorenzoparedes2306Ай бұрын
Thank you so much. Mystery solved. I need to remove the dashboard to do a heater core replacement. Paper "Complete Manual" by Haynes is almost useless for critical details like this.
@markw8139Ай бұрын
Perfect..just what I needed ..Thank you sir!
@bodge55Ай бұрын
Simple yet very explicit. Tks a bunch
@Lion-cf3jkАй бұрын
Salve volevo chiederti il perché hai svuotato il liquido di raffreddamento
@ErkiDM1997Ай бұрын
If all instruction videos were this good nobody would need a mechanic😂😂😂😂
@laurajones1474Ай бұрын
BRILLIANT! Thank you
@kievmiddeton2656Ай бұрын
This is who needs to win the Mark Twain award! Thank you!!!
@shallowfakes593Ай бұрын
perfect video many thanks!
@fr0st351Ай бұрын
This helped me out so much, thank you!!
@Shepherds100Ай бұрын
Is this filmed in 240x240px? I mean, I know it was 2019, but like check the settings on the camera first next time
@FannyCerna-ur6ueАй бұрын
De qué año es este passat?
@wizinjshАй бұрын
To change the socket you have to change all the block?
@RRRRefuelRideRaceАй бұрын
Exact and straight to the point. Great. Like well deserved.
@davidmkandhlaАй бұрын
Great video, thank you a lot, just subscribed from South Africa, i have the 2005 Ford Focus, petrol 1.6L with the zetec engine, manual, i will be attempting to remove the dash, seats and carpet to deep clean.
@loethbouwens9960Ай бұрын
Use 2 butterknives and ur fine🙌🏻 thanks for the vid
@rcmakingtracks18Ай бұрын
Excellent. Very helpful, I had visions of having to go through the archives liner... thanks again. John
Пікірлер
Donde puedo comprar el reemplazo ?
Matrix LOL
Where the hell am I getting them keys ive never seen them before 😂
This is for 2015 Passat?
Mine wont go back up after i dropped the fob in water
Wrong lighting.
Thanks
I'm trying to install a new undertray piece after driving for so many years without one. I'm thinking it'll be helpful for keeping air going the right ways in the engine bay now that my car has forced induction. unfortunately it seems like I have lost all the little mounting points over the years lol no fender liners and my front bumper is slightly hacked up on the inside for the intercooler thx for video though, at least I know I don't have the thing backwards
تغيير بطارية هوندا اكورد ٢٠١٢ ٢٠١٤
Make sure you state where is the vehicle from because vehicles from United States and from England or British are totally different. Like the Ford Focus 2007 parts are located differently depending on the stupid engineers.
Can confirm it was dark and cold
Is there a 3rd high mounted brake light?
the bracket that hold it together at the window, thread snapped, need one O/S same as if anyone has one.
Very helpful, thanks 👍
Sick!
Wife told me earlier ,i gotta remove the front bumper to replace low beam bulb .😂
Please can you help me by showing me the various bolts I have to untied to replace the v-ribbed belt tensioner of this your ford focus MK1.I am blocked and have to replace mine.
Ford Focus Mk1 1.6 Petrol Auxiliary Belt Tensioner Pulley 98MF-3C631 CG 190115
Hell yes, this worked great on my JDM import, thank you!
I wish modern cars were like my old Morris Minor for repairs.
Pfft! Easy to adjust without this "lifehack" it is! Lame waste of time, your video is!
That's not a "spanner". And the authentic Vise Grips of five decades ago don't have the same adjustment bolt your Chinese knock-off has, so this "tip" is only for those who shop at Harbor Freight.
This video just help me thanks
i award you no points bro but i still thank you for doing something and learning ppl. What i do i lock it too loose on a thing and turn it untill it's holding, unlock, give a bit more grip and lock again. fastest method i found and no guessing
Pro tip right there. 👍🏻😃👌🏼
If you’re using no name locking pliers they’re not vise grip. Also who needs this? Pathetic
Agreed.
I was almost flabbergasted that this aint common knowledge, then i remembered that most men under 30 cant read a tape measure these days..
I've never owned a pair of Vise Grips that have that hole or a hex shaped bolt on them. I can't ever recall seeing any Vise Grips with anything like that. I guess it's nice to know that someone somewhere can do this, but it's no more of a secret trick than if I buy a car with secret compartments built into it and make a clickbait video saying "SECRET COMPARTMENT IN YOUR CAR THAT YOU NEVER FOUND!" Of course you never found it, because your car doesn't have any secret compartments. I never knew this trick because I've never been able to do it with my stuff.
Great tip, used this on a 2002 Rav4, worked perfectly. Thanks Mark👍
Beautiful.
What year is this?
Nope, it doesn't work.
Straight to the point 🎉
Thanks!
2 questions. 1. How do you decide which part of plate you would make for earthing? 2. After earthing, only 1 light is on. What should i change?
Thank you!🖐🖐🖐
"There's an eight millimeter bolt between the front bumper and the wing." My bumper got caught on a sprinkler head in front of a parking space while backing out, and several bolts and clips broke through the fibreglass. In this spot, I see on both parts a large 'oval' opening. Nothing threaded for a bolt. Ideas?
Thank you so much. Mystery solved. I need to remove the dashboard to do a heater core replacement. Paper "Complete Manual" by Haynes is almost useless for critical details like this.
Perfect..just what I needed ..Thank you sir!
Simple yet very explicit. Tks a bunch
Salve volevo chiederti il perché hai svuotato il liquido di raffreddamento
If all instruction videos were this good nobody would need a mechanic😂😂😂😂
BRILLIANT! Thank you
This is who needs to win the Mark Twain award! Thank you!!!
perfect video many thanks!
This helped me out so much, thank you!!
Is this filmed in 240x240px? I mean, I know it was 2019, but like check the settings on the camera first next time
De qué año es este passat?
To change the socket you have to change all the block?
Exact and straight to the point. Great. Like well deserved.
Great video, thank you a lot, just subscribed from South Africa, i have the 2005 Ford Focus, petrol 1.6L with the zetec engine, manual, i will be attempting to remove the dash, seats and carpet to deep clean.
Use 2 butterknives and ur fine🙌🏻 thanks for the vid
Excellent. Very helpful, I had visions of having to go through the archives liner... thanks again. John