In this video I remove my front suspension on my BF Ford Falcon to change the top strut mounts and adjust the suspension.
The reason for this is that I have been having issues with the front right suspension and I thought now was the time to fix it up. When I go over a dip in the road the front right wheel scrubs on the guard and really not sure why this happens. I'm not sure if that was due to the right side being 5mm lower than the left side. The one thing I did notice was the original rubber mounts for the spring had lots of air gaps and the replacement were solid rubber pieces, so it will be interesting to see if this make a difference. One thing I have noticed is that the car sits 10mm higher with the new rubbers.
While I had it all apart it was a great opportunity to adjust my Koni shocks to the softest setting as the ride needs to be softened up. The Koni part no. is 822535SP1.
Also, be careful with front top strut mounts. The ones I bought did not fit and they are meant to be the correct ones. I would have returned them but I've had the sitting around for a couple of years now.
I'll do a follow up video to see if this has fixed my suspension issues.
Please note that working on suspension car springs is dangerous and you really need to take all safety precautions.
If you want to see more content from modaufy garage please click the subscribe button.
Check out my social media:
Facebook: / modaufygarage
Instagram: / modaufy.garage
Instagram: / modaufy.home
Please note: I am not a qualified mechanic, I just enjoy working on cars in my spare time and I want to bring you along on my journey. Modaufy Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All cars are different and what works for me, might not work for you. Working in or around cars can be dangerous so if in doubt talk to a qualified mechanic. Just remember to be safe at all times.