Ford F-150 Power Steering Pump Remove And Replace.

Фильм және анимация

Ford F-150 4.6 and 5.4 Power Steering Pump Replacement. This One Was Extremely Noisy And Had Some Issues With The Pump. Replaced Pump And Noise Is Gone.

Пікірлер: 37

  • @mqsack
    @mqsack19 күн бұрын

    Great video. Incredibly informative. I probably could do this myself but my local mechanic is so reasonable I will let him tackle it. But now I know what it takes!

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    19 күн бұрын

    @@mqsack awesome thanks for reaching out and the positive feedback!!!

  • @chasitytallbrother895
    @chasitytallbrother8958 ай бұрын

    Been trying to find a good video on this job, thank you so much!

  • @masonray5233
    @masonray52334 ай бұрын

    Clear and straight to the point, great video!

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    4 ай бұрын

    Thank You

  • @Steve_Parks
    @Steve_ParksАй бұрын

    You made that look easy.

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    Ай бұрын

    Thank you!! It is definitely not as easy as it looks but a little patience and the correct tools go a long way. Once you’ve done this repair a few dozen times or more it becomes more routine work. Thanks for reaching out.

  • @Steve_Parks

    @Steve_Parks

    Ай бұрын

    @@SMAutoRepairLLC I have neither, but I’ll be changing my pump on Thursday. Thanks for posting the video.

  • @lanemurphy8395
    @lanemurphy83953 күн бұрын

    Thanks for the video. Any idea if the process would be the same for an E 150 van with 5.4? (2003) suddenly lost power steering with no warning. Belt is good and reservoir is full so assuming it’s the pump

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    3 күн бұрын

    @@lanemurphy8395 will be very similar for the van, this video should help with the replacement of that the pump. Very common for your issue to be in the power steering pump.

  • @lanemurphy8395

    @lanemurphy8395

    3 күн бұрын

    @@SMAutoRepairLLC thanks. At 297k can’t complain. Gonna dive in tomorrow hopefully it’s not too bad

  • @SMAutoRepairLLC
    @SMAutoRepairLLC4 ай бұрын

    Thanks for watching subscribe for more videos!!!😊

  • @brianmarkley3510
    @brianmarkley35105 ай бұрын

    Is it the same process to replace the pump on a 2008 Expedition 5.4L ? Thank you

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    5 ай бұрын

    Yes it is!

  • @jasonwilliams4390
    @jasonwilliams43902 ай бұрын

    I have a 2005 4.2l f150, would you recommend replacing both lines while I'm down there? Thank you for the video, I'm gonna check more of you're stuff out. Oh, should I replace the reservoir as well?

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    2 ай бұрын

    No problem thanks for reaching out, the pressure lines should be replaced if you see any sign of a leak. If it looks wet at all or a ton of rust built up on any part of the line set it definitely wouldn’t hurt to go ahead and change them out while your in there. A small leak on a pressure line can turn into a massive leak pretty quickly! For the reservoir if it’s in still looking good no heat cracks you’ll be ok to keep it, there’s no pressure on that part of the system.

  • @jasonwilliams4390

    @jasonwilliams4390

    2 ай бұрын

    @@SMAutoRepairLLC awesome, brother. Thank you. Subbed and liked.. 👍

  • @davidma9801
    @davidma980110 ай бұрын

    How similar is this compares to the 4.6 L, how similar the whole procedure is?

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    10 ай бұрын

    Exactly the same for the 4.6 and 5.4

  • @davidma9801

    @davidma9801

    10 ай бұрын

    @@SMAutoRepairLLCThanks!

  • @shanerobin8349
    @shanerobin83496 ай бұрын

    How did you drain the system before removing the return line?

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    6 ай бұрын

    You can take the return hose off of the reservoir and drain it out. Or when you remove the line from the pump have a drain pan ready to drain in to.

  • @erock12278
    @erock122788 ай бұрын

    What size wrench is need to remove pressure line from pump?

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    8 ай бұрын

    It is either a 16mm or 18mm

  • @reconscout7565

    @reconscout7565

    3 ай бұрын

    My 06' 5.4 is bigger than 18mm

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    3 ай бұрын

    What size is yours?

  • @chrisburrell8489
    @chrisburrell848911 ай бұрын

    What was the head size on the bolts for the steering pump? Thank you for the video

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    11 ай бұрын

    10mm thanks for watching

  • @chrisburrell8489

    @chrisburrell8489

    11 ай бұрын

    @@SMAutoRepairLLC thanks! And thanks for posting the video

  • @efrainclub5497
    @efrainclub54974 ай бұрын

    Its only 2 bolts or 3 holding the pump?

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    4 ай бұрын

    3 bolts in total all 10mm

  • @ariellemeyer6848
    @ariellemeyer6848Ай бұрын

    About how long did this take you? Im gonna try to do it myself to save some money.

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    Ай бұрын

    For a less experienced DIYER, I’d say plan on a solid 2 hours plus. If you’re more advanced and regular automotive repairs are within your skill set it could be done in an hour or less. A ratcheting 10mm wrench will be very helpful while doing this repair if you don’t have one I’d purchase one before starting the repair. The rest can be done with basic set of mechanics tools. I hope this helps!

  • @justsayin7937
    @justsayin79373 ай бұрын

    What year model is this? Would the procedure be the same as this for a 2010 4.6?

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    3 ай бұрын

    Pretty much every 4.6 or 5.4 F-150.

  • @justsayin7937

    @justsayin7937

    3 ай бұрын

    @@SMAutoRepairLLC thanks boss

  • @SMAutoRepairLLC

    @SMAutoRepairLLC

    3 ай бұрын

    @@justsayin7937 no problem at all. if I’m not mistaken this truck is a 2006.

Келесі