Ford Econoline Gas Engine Oil Change

This is the process we use to change the oil on our 2002 Ford Econoline V10 van. This is the first change after installing a new factory V10 engine. We are now running Mobil 1 5w-20 synthetic oil and an OEM Ford FL-820S oil filter.
Tools needed-
16mm socket with extension
Ratchet
Oil Filter wrench
Funnel

Пікірлер: 8

  • @rorybellamy2533
    @rorybellamy2533 Жыл бұрын

    my drain bolt was dripping . new bolt and washer finally made the fix , so much better. Good tip Thank your Dad

  • @mr.doityourselfandsave4369
    @mr.doityourselfandsave4369 Жыл бұрын

    Great van man, what is the name of the lift kit of your van, I try to do the same but not body nows, say is only for trucks. Thanks.

  • @vantageoptics3767

    @vantageoptics3767

    2 ай бұрын

    Weldtec Designs makes this suspension

  • @jurnagin
    @jurnagin5 ай бұрын

    Never puncture your filter, it should twist off, because you may not have the exact replacement

  • @vantageoptics3767

    @vantageoptics3767

    5 ай бұрын

    Pierced to drain not to remove....

  • @jurnagin

    @jurnagin

    5 ай бұрын

    @@vantageoptics3767 oh, but you'll ruin it, you may not have the correct replacement on hand and need to drive that vehicle to get correct size

  • @vantageoptics3767

    @vantageoptics3767

    5 ай бұрын

    @@jurnagin personal vehicle, I wouldn't remove an oil filter without a proper replacement!

  • @jurnagin

    @jurnagin

    5 ай бұрын

    @@vantageoptics3767 I remember one time I changed oil and used a screwdriver to twist off oil filter, but the new one didn't fit, they gave me wrong size, so be careful especially if you don't have access to another vehicle