You’re presentations and videos are absolutely awesome as you include the fine and important details that without them the work of a D I Y mechanic would be possibly jeopardized. Thank you for your valuable time and your hard work in producing the Scattered Rusty Projects videos 🎥 🎞️!! ! ! ! ! !
@scatteredrustyprojects
Жыл бұрын
Back in the day, I went through a lot of pitfalls learning the hard way. Glad to share some of the procedures we do to help someone out.
@muskyclam58354 ай бұрын
excellent excellent tutorial I have a Ford E200 and I just went through that whole process good thing I found a shop that pressed them on for me for $100 plus took care of the drive shaft joints great video I'm very impressed .. now that I've seen this video I wonder about that first seal if I did it backwards or not I'm hoping I didn't
@ChipSmith-kw3gu7 ай бұрын
You've answered questions that I didn't know I would of had. Great information. Thanks
@scatteredrustyprojects
7 ай бұрын
thanks! Glad you enjoyed the video.
@kingduckford Жыл бұрын
Music is distracting. The quality of the video and what is being explained is enough.
@caneighbors7875 Жыл бұрын
Nice video; thanks for posting!
@whatsdadcookin63206 ай бұрын
Great info! Ty
@johnrodriguez473 Жыл бұрын
You need to pull the pinion support out and set the preload on the carrier bearings. Once that is done you mark the adjusters on the top where they are mirror to each other and put the pinion back in. When you adjust the backlash, if move the adjusters the same amount to keep the preload on the bearings. The way you it, you are going to have very noisy gears
@scatteredrustyprojects
Жыл бұрын
I see your point, but it isn't that sensitive and not really necessary. Perhaps in a high load application like circle track or baja you'd want to take every precaution. We do a lot of axle work. They don't leave noisy or come back developing noise a few months or years down the road. Bearing preload is bearing preload. Regardless of how it is obtained, why would you feel my method would promote very noisy gears?
@boyddawson92374 ай бұрын
Where did you get your housing cleaning brush
@scatteredrustyprojects
4 ай бұрын
At my local plumbing supply. A 3" flue brush.
@paulhead Жыл бұрын
Why oil on the bearing cap bolts and not locktite?
@scatteredrustyprojects
Жыл бұрын
Similar to not using loctite on bolts for the main caps in an engine. The bolts have some stretch in which the elasticity will keep them secure. if the bolts stop short because of dry threads, they could come loose. I suppose enough loctite would act as a lubricant during assembly, but it isn't necessary.
@tjed1071 Жыл бұрын
Don’t you check pinion preload without a seal installed?
@scatteredrustyprojects
Жыл бұрын
Haven't measure a difference with and without a seal, but I can't feel a difference by hand. If the seal is lubricated it doesn't account for much. Perhaps if the seal is dry, it might drag the pinion.
@trill408 ай бұрын
It this the same rear end that's on a 1969 mach 1?
@scatteredrustyprojects
8 ай бұрын
Yes, if you have 351, 390 or 428 or Boss 302/429. Otherwise you'd have an 8" for the strait 6 and 302 cars.
@Thorgon-Cross Жыл бұрын
Your background music should be moved to...THE BACKGROUND, music is way to loud can barely hear you.
@scatteredrustyprojects
Жыл бұрын
I do adjust volumes down of music and sometimes increase the video volume. Thought I moved it enough, but maybe not. Been doing trans for 25 years, videos for a few months. Let me know on the next one if there is improvement. Thanks for watching!
@pauldamato1316 Жыл бұрын
Is this my tru-track finally????
@scatteredrustyprojects
Жыл бұрын
no, it's on the list.
@scatteredrustyprojects
Жыл бұрын
Your 2nd Tru-Trac will probably end up in the yellow Eliminator. Sometime you have to visit with the 3rd member you want a Tru-Trac in.
@stevenwagner62188 күн бұрын
Get rid of the background music so that we can actually hear your instructions would be nice.
@scatteredrustyprojects
7 күн бұрын
I didn't post this video as a training session. The video is to capture the moment of what I am doing in my shop, with the people that are there and the music I have playing. If you were to visit, it would be like what is shown, not a classroom. Thanks for watching.
@robertfrink1130 Жыл бұрын
It would be a better video without the ANNOYING music. Let the guy be heard over the noisy music!
@scatteredrustyprojects
Жыл бұрын
I have a proficiency for transmissions and axles. Video editing is a new thing. While i tapered down the music volume a bit when i started talking, Looking back i would would probably quiet it a bit more. I listen to music while working, so it seems appropriate to have a little music in the background. BTW, you arent the first to mention the music being too loud. Thanks for watching!
@paulzivcic23945 ай бұрын
Man, turn the music down....or something a bit more subtle....very distressing
@scatteredrustyprojects
5 ай бұрын
When you visit my shop you may not always hear music you like. You will always hear music I like. I'm not a Hollywood studio. You will notice in my later videos the music has better editing.
@philsrowse72667 ай бұрын
Shame about the awful background music
@scatteredrustyprojects
7 ай бұрын
My videos are more geared towards if you were hanging out in my shop than a classroom setting. Merry Christmas and thanks for watching!
Пікірлер: 31
You’re presentations and videos are absolutely awesome as you include the fine and important details that without them the work of a D I Y mechanic would be possibly jeopardized. Thank you for your valuable time and your hard work in producing the Scattered Rusty Projects videos 🎥 🎞️!! ! ! ! ! !
@scatteredrustyprojects
Жыл бұрын
Back in the day, I went through a lot of pitfalls learning the hard way. Glad to share some of the procedures we do to help someone out.
excellent excellent tutorial I have a Ford E200 and I just went through that whole process good thing I found a shop that pressed them on for me for $100 plus took care of the drive shaft joints great video I'm very impressed .. now that I've seen this video I wonder about that first seal if I did it backwards or not I'm hoping I didn't
You've answered questions that I didn't know I would of had. Great information. Thanks
@scatteredrustyprojects
7 ай бұрын
thanks! Glad you enjoyed the video.
Music is distracting. The quality of the video and what is being explained is enough.
Nice video; thanks for posting!
Great info! Ty
You need to pull the pinion support out and set the preload on the carrier bearings. Once that is done you mark the adjusters on the top where they are mirror to each other and put the pinion back in. When you adjust the backlash, if move the adjusters the same amount to keep the preload on the bearings. The way you it, you are going to have very noisy gears
@scatteredrustyprojects
Жыл бұрын
I see your point, but it isn't that sensitive and not really necessary. Perhaps in a high load application like circle track or baja you'd want to take every precaution. We do a lot of axle work. They don't leave noisy or come back developing noise a few months or years down the road. Bearing preload is bearing preload. Regardless of how it is obtained, why would you feel my method would promote very noisy gears?
Where did you get your housing cleaning brush
@scatteredrustyprojects
4 ай бұрын
At my local plumbing supply. A 3" flue brush.
Why oil on the bearing cap bolts and not locktite?
@scatteredrustyprojects
Жыл бұрын
Similar to not using loctite on bolts for the main caps in an engine. The bolts have some stretch in which the elasticity will keep them secure. if the bolts stop short because of dry threads, they could come loose. I suppose enough loctite would act as a lubricant during assembly, but it isn't necessary.
Don’t you check pinion preload without a seal installed?
@scatteredrustyprojects
Жыл бұрын
Haven't measure a difference with and without a seal, but I can't feel a difference by hand. If the seal is lubricated it doesn't account for much. Perhaps if the seal is dry, it might drag the pinion.
It this the same rear end that's on a 1969 mach 1?
@scatteredrustyprojects
8 ай бұрын
Yes, if you have 351, 390 or 428 or Boss 302/429. Otherwise you'd have an 8" for the strait 6 and 302 cars.
Your background music should be moved to...THE BACKGROUND, music is way to loud can barely hear you.
@scatteredrustyprojects
Жыл бұрын
I do adjust volumes down of music and sometimes increase the video volume. Thought I moved it enough, but maybe not. Been doing trans for 25 years, videos for a few months. Let me know on the next one if there is improvement. Thanks for watching!
Is this my tru-track finally????
@scatteredrustyprojects
Жыл бұрын
no, it's on the list.
@scatteredrustyprojects
Жыл бұрын
Your 2nd Tru-Trac will probably end up in the yellow Eliminator. Sometime you have to visit with the 3rd member you want a Tru-Trac in.
Get rid of the background music so that we can actually hear your instructions would be nice.
@scatteredrustyprojects
7 күн бұрын
I didn't post this video as a training session. The video is to capture the moment of what I am doing in my shop, with the people that are there and the music I have playing. If you were to visit, it would be like what is shown, not a classroom. Thanks for watching.
It would be a better video without the ANNOYING music. Let the guy be heard over the noisy music!
@scatteredrustyprojects
Жыл бұрын
I have a proficiency for transmissions and axles. Video editing is a new thing. While i tapered down the music volume a bit when i started talking, Looking back i would would probably quiet it a bit more. I listen to music while working, so it seems appropriate to have a little music in the background. BTW, you arent the first to mention the music being too loud. Thanks for watching!
Man, turn the music down....or something a bit more subtle....very distressing
@scatteredrustyprojects
5 ай бұрын
When you visit my shop you may not always hear music you like. You will always hear music I like. I'm not a Hollywood studio. You will notice in my later videos the music has better editing.
Shame about the awful background music
@scatteredrustyprojects
7 ай бұрын
My videos are more geared towards if you were hanging out in my shop than a classroom setting. Merry Christmas and thanks for watching!