Excellent work Mr. Pete.Corn about ready. 14.5 percent in east central Illinois.
@farmerpete
9 ай бұрын
Thank you. I just checked mine today. 15.7 Almost go time.
@donvoll25809 ай бұрын
Good day Pete Yes coming right along. When your adjusting flywheel & trying to put bolts I seen were u were getting short of breath That is were I lose it, drilling with electric drill short of breath Well good luck See u Thanks
@farmerpete
9 ай бұрын
Hi Don! Yes, don't have the stamina I used to. Have to know enough to stop and rest once in a while.
@garybarrett65819 ай бұрын
good job Pete!! l will be watchin!!!!
@farmerpete
9 ай бұрын
Thank you.
@Rollinghillsfarmsmn9 ай бұрын
I’m impressed with your breadth of engine knowledge as well as your patience. Not sure I would want to try something like this without all the specialty tools. Not for amateurs.
@farmerpete
9 ай бұрын
Thank you. I have a lot of experience from back in the day.
@GosselinFarmsEdGosselin9 ай бұрын
Seems like the smaller ones are a bit stubborn going back together.. had the bigger tractors slip right together on the first try. Then spend an hour trying to figure out what we missed 🤣😂 Coming right along Pete 👍😎
@farmerpete
9 ай бұрын
Thanks Ed! I was trying to figure out what I forgot that was keeping this one from going together 🥲It just needed to argue for a while.
@GosselinFarmsEdGosselin
9 ай бұрын
@@farmerpete semi truck transmissions are always fun, if they do go in easy, it usually means you forgot something....
@pagrainfarmer9 ай бұрын
I've personally never rebuilt an engine, so I learned a lot from this video. It was very interesting to me.
@farmerpete
9 ай бұрын
Glad you enjoyed it!
@debh41909 ай бұрын
Pete + tractor engine needing work = happiness
@farmerpete
9 ай бұрын
That's an accurate equation, 🙂
@andymahaffa33969 ай бұрын
Like A Glove Buddy !
@farmerpete
9 ай бұрын
Thanks!
@gleanerk9 ай бұрын
Yep kinda didn’t want to go together but you got it there ! Well done Pete ! Enjoyed watching!
@farmerpete
9 ай бұрын
Thank you.
@dehavenfamilyfarm9 ай бұрын
It was stubborn, but you won in the end! Hope harvest is going well.
@farmerpete
9 ай бұрын
Thanks Chris! Just got everything ready for harvest today. Planning to rock and roll next week.
@Pennies_on_the_dollar9 ай бұрын
Persistence paid off!! You knkw if thr camera hadn't been on, it would have gone right together!! You sir are a genius at this stuff!! Hope harvest starts off well sir, amd look fwd ti thr short and thr harvest videos!! 😁😁😁🌽🌽🌾🌾👍👍🇺🇸🇺🇸🌱🌱
@farmerpete
9 ай бұрын
Thank you Nelson! Looks like harvest starts next week.
@Pennies_on_the_dollar
9 ай бұрын
@@farmerpete 😁😁🌽🌽
@brittblanton83429 ай бұрын
Thanks Pete, I was straining for you when you were attempting to get the engine slid back in 😂
@farmerpete
9 ай бұрын
Thanks! I think that helped🙂
@johnhall16149 ай бұрын
Great job
@farmerpete
9 ай бұрын
Thanks!
@johnnymilliron83879 ай бұрын
Thy made real tractors back then .no plastic things.
@farmerpete
9 ай бұрын
Yup, not much plastic on this one.
@user-th3bk6rn5h9 ай бұрын
could you tell me where you got the gears for 170 allis
Пікірлер: 32
Excellent work Mr. Pete.Corn about ready. 14.5 percent in east central Illinois.
@farmerpete
9 ай бұрын
Thank you. I just checked mine today. 15.7 Almost go time.
Good day Pete Yes coming right along. When your adjusting flywheel & trying to put bolts I seen were u were getting short of breath That is were I lose it, drilling with electric drill short of breath Well good luck See u Thanks
@farmerpete
9 ай бұрын
Hi Don! Yes, don't have the stamina I used to. Have to know enough to stop and rest once in a while.
good job Pete!! l will be watchin!!!!
@farmerpete
9 ай бұрын
Thank you.
I’m impressed with your breadth of engine knowledge as well as your patience. Not sure I would want to try something like this without all the specialty tools. Not for amateurs.
@farmerpete
9 ай бұрын
Thank you. I have a lot of experience from back in the day.
Seems like the smaller ones are a bit stubborn going back together.. had the bigger tractors slip right together on the first try. Then spend an hour trying to figure out what we missed 🤣😂 Coming right along Pete 👍😎
@farmerpete
9 ай бұрын
Thanks Ed! I was trying to figure out what I forgot that was keeping this one from going together 🥲It just needed to argue for a while.
@GosselinFarmsEdGosselin
9 ай бұрын
@@farmerpete semi truck transmissions are always fun, if they do go in easy, it usually means you forgot something....
I've personally never rebuilt an engine, so I learned a lot from this video. It was very interesting to me.
@farmerpete
9 ай бұрын
Glad you enjoyed it!
Pete + tractor engine needing work = happiness
@farmerpete
9 ай бұрын
That's an accurate equation, 🙂
Like A Glove Buddy !
@farmerpete
9 ай бұрын
Thanks!
Yep kinda didn’t want to go together but you got it there ! Well done Pete ! Enjoyed watching!
@farmerpete
9 ай бұрын
Thank you.
It was stubborn, but you won in the end! Hope harvest is going well.
@farmerpete
9 ай бұрын
Thanks Chris! Just got everything ready for harvest today. Planning to rock and roll next week.
Persistence paid off!! You knkw if thr camera hadn't been on, it would have gone right together!! You sir are a genius at this stuff!! Hope harvest starts off well sir, amd look fwd ti thr short and thr harvest videos!! 😁😁😁🌽🌽🌾🌾👍👍🇺🇸🇺🇸🌱🌱
@farmerpete
9 ай бұрын
Thank you Nelson! Looks like harvest starts next week.
@Pennies_on_the_dollar
9 ай бұрын
@@farmerpete 😁😁🌽🌽
Thanks Pete, I was straining for you when you were attempting to get the engine slid back in 😂
@farmerpete
9 ай бұрын
Thanks! I think that helped🙂
Great job
@farmerpete
9 ай бұрын
Thanks!
Thy made real tractors back then .no plastic things.
@farmerpete
9 ай бұрын
Yup, not much plastic on this one.
could you tell me where you got the gears for 170 allis
@farmerpete
9 ай бұрын
I got the gears from All State Ag Parts.