Nice work bro always nice breaking in the new motor soon it will be the best bash motor!! Keep up the good work love the nitro!!! 🤜👏💯🇦🇺🔥
@Nitro_rc_life
11 ай бұрын
I hope it's a good one it's got some serious pinch so we will see
@islandrc-duke197211 ай бұрын
Awesome, glad to see you got it going, love the sound
@TastyBRC11 ай бұрын
I also struggled with the force 32, that engine break-in destroyed my hand..
@Nitro_rc_life
11 ай бұрын
Ya man it's super tight I bet it takes a gallon or so
@fishininjun11 ай бұрын
hot plug, more fuel. It's been tried, tested and true.
@Nitro_rc_life
11 ай бұрын
I'll try it
@Nitro_rc_life
11 ай бұрын
Hey so I tried a r4 today and the tune was way more stable than k you
@fishininjun
11 ай бұрын
@@Nitro_rc_life I’ve been in nitro for a long time, and the one thing I’ve learned is, I don’t know anything. The more I try and think about how the motor is running and how to tune, I become more confused. So I’ve just taken advice from normal bashers that run their vehicles daily. Thebug404 taught me about the fuel and glow plug combos.
@Vogan65711 ай бұрын
nice job keep up the good work!!!
@SLC_nitro11 ай бұрын
You wasn't kidding when you said it was a pain! It will be Bad ass
@Nitro_rc_life
11 ай бұрын
Ya man wouldn't stay running I was also told to run a hot plug with it so I'm going to try that
@SLC_nitro
11 ай бұрын
@Nitro_rc_life I seen that... not sure you could richen that low needle any more! So not sure how to provide more fuel
@Nitro_rc_life
11 ай бұрын
Can only try it
@joshlaquerre31975 ай бұрын
Curious on how this engine has worked out for you
@Nitro_rc_life
5 ай бұрын
Man I tell you what I love this engine it tunes amazing and has tons of power but sure drinks plenty!!!!
@ofnaguycarlwatts860211 ай бұрын
Why would you use 30% to break 1 in with less oil content .??!
@Nitro_rc_life
11 ай бұрын
I added pure racing castor for 1 and 2 because that's what I run 30%
@ofnaguycarlwatts8602
11 ай бұрын
@@Nitro_rc_life 👍👍 I was hoping you did something else to compensate.
@Nitro_rc_life
11 ай бұрын
Ya I'm a fan of benol castor
@ofnaguycarlwatts8602
11 ай бұрын
@@davidrx795 I wouldn't never run 16% in nothing I have maybe my lawn mower 😂😂 nah wouldn't do that either 😂😂. You're in the conversation with a Man that has hand made successfully my own Con Rod!! 😂
@jayp929911 ай бұрын
You need to make a test stand so you are not having to do that on the ground.
Пікірлер: 24
Nice work bro always nice breaking in the new motor soon it will be the best bash motor!! Keep up the good work love the nitro!!! 🤜👏💯🇦🇺🔥
@Nitro_rc_life
11 ай бұрын
I hope it's a good one it's got some serious pinch so we will see
Awesome, glad to see you got it going, love the sound
I also struggled with the force 32, that engine break-in destroyed my hand..
@Nitro_rc_life
11 ай бұрын
Ya man it's super tight I bet it takes a gallon or so
hot plug, more fuel. It's been tried, tested and true.
@Nitro_rc_life
11 ай бұрын
I'll try it
@Nitro_rc_life
11 ай бұрын
Hey so I tried a r4 today and the tune was way more stable than k you
@fishininjun
11 ай бұрын
@@Nitro_rc_life I’ve been in nitro for a long time, and the one thing I’ve learned is, I don’t know anything. The more I try and think about how the motor is running and how to tune, I become more confused. So I’ve just taken advice from normal bashers that run their vehicles daily. Thebug404 taught me about the fuel and glow plug combos.
nice job keep up the good work!!!
You wasn't kidding when you said it was a pain! It will be Bad ass
@Nitro_rc_life
11 ай бұрын
Ya man wouldn't stay running I was also told to run a hot plug with it so I'm going to try that
@SLC_nitro
11 ай бұрын
@Nitro_rc_life I seen that... not sure you could richen that low needle any more! So not sure how to provide more fuel
@Nitro_rc_life
11 ай бұрын
Can only try it
Curious on how this engine has worked out for you
@Nitro_rc_life
5 ай бұрын
Man I tell you what I love this engine it tunes amazing and has tons of power but sure drinks plenty!!!!
Why would you use 30% to break 1 in with less oil content .??!
@Nitro_rc_life
11 ай бұрын
I added pure racing castor for 1 and 2 because that's what I run 30%
@ofnaguycarlwatts8602
11 ай бұрын
@@Nitro_rc_life 👍👍 I was hoping you did something else to compensate.
@Nitro_rc_life
11 ай бұрын
Ya I'm a fan of benol castor
@ofnaguycarlwatts8602
11 ай бұрын
@@davidrx795 I wouldn't never run 16% in nothing I have maybe my lawn mower 😂😂 nah wouldn't do that either 😂😂. You're in the conversation with a Man that has hand made successfully my own Con Rod!! 😂
You need to make a test stand so you are not having to do that on the ground.
@jayp9299
11 ай бұрын
A saw bourse works good in the short term.
@Nitro_rc_life
11 ай бұрын
For sure