Just Installed the Built right Industries rear latch. Thanks for the vid super easy!! Bought my brother n law one too.

Got me, just took delivery of my 2020 F-350 Lariat 8 ft. bed. yesterday. Impressive. Left a stoplight, looked down,6th gear 35mph. Damm the ass end was not even out of the intersection yet.

Finally! A mod under 25 bucks! I bought a 2020 F250 King Ranch 3 months ago. I'm going to do all the mods you have done on yours. Air intake, disaster prevention, upper fuel filter mod, soon to released lower fuel filter mod, At least this one is cheap. lol.

Thanks for the great tip and video. Just installed one on my Duty, Like you found out no instructions so it was Daaaa a Rubrics Cube for a couple minutes. Appreciate your demo. Useful and works. Should have been stock from the factory but hey look how much weight and $$ they saved for epa fuel economy.

Nice little set up one of the guys at the fire house that same set up on his 150 it works great. Thanks ARod

Great video I just ordered one have a great day be safe.

Did that type of mod on my 2011 F150 Platinum. Totally forgot about the seat release on my 2019 F350 - thanks for the reminder.

@PowerStrokeTechTalkwARod

3 жыл бұрын

Done.

Found this tip on my 17 sd ,really helpful when cleaning the rear glass, tks A/rod.

@PowerStrokeTechTalkwARod

3 жыл бұрын

Hellz yeah

Awesome!

Awesome. Could never clean that window. Thank You

Thanks!!

Cool.

Good luck 👍

Probably the first thing I did to my 2020, I store soo much stuff behind my seats (four way, 4x30 HD tow strap, regular ratchet straps, ford goose ball kit, bed cargo net, load bar, etc) it’s like a tool box but on the inside of the cab. Don’t think I could fit as much stuff if I had the premium sound system tho. I see arod has a sub and what looks like a amp back there. I have the inverter built in but it is under the seat on the rear passenger side. Good video

@PowerStrokeTechTalkwARod

3 жыл бұрын

Thanks bud!

Nice fix but I have to say I like my 06 f250 setup better, a lever for the back and a lever for the bottom, I can’t judge the reasoning for the design because I’ve never looked that close at a new super duty 👍😁

Nice vid ARod. I just got my BuiltRight version in the mail today. This video was perfect timing and should make quick work of it as well. I also got the BuiltRight Dash mount at the same time and already installed it tonight. It took me about 30 mins total. You should check out their products and look at the dash mount. Thanks again for taking the time to give the install overview.

@PowerStrokeTechTalkwARod

3 жыл бұрын

Thanks buddy

@chadh6899

3 жыл бұрын

@@PowerStrokeTechTalkwARod Just installed it. Pretty quick process like you showed. However it was a PITA getting it to relatch again but I finally got it. I think it is a bit of right steps and feel. Either way, it worked out and will make it nice to be able to easily fold that seat forward.

@Conner._.Anderson

2 жыл бұрын

@@chadh6899 I just pulled the side lever and shoved the top back and it snapped right in

I’m in parts and had a customer yelling at me about this a couple months ago. Said her truck was built wrong because it didn’t have one. Glad I wasn’t crazy when the catalog showed nothing.

@PowerStrokeTechTalkwARod

3 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣

If you re look at your video you will see for one second you had the red slide small hole on the post correctly. The small hole on the red slide needs to drop down straight onto the post. Great Video I had no Idea you could do that.

@PowerStrokeTechTalkwARod

3 жыл бұрын

Mine did not fit.....

I made my own with a key ring and some paracord

This was the first mod I did on my 2019, perfect spot for my tool case, I paid the premium price for the BuiltRight brand to support a local American business, I see hundreds of eBay knockoffs now for less than $10 and I see why now after watching your video, the small hole clips on the latch stud of the BuiltRight and fit like a glove, not knocking the one you got but only the best for my XLT F250 🤪

@PowerStrokeTechTalkwARod

3 жыл бұрын

Wow i wasn't aware of other ones, 1st one i saw pop up..looked cool. That lil red part didn't fit in mine...

I like it. Let us know if it rattles though. Don't like the metal to metal design. I piece of foam tape on both sides might solve the issue if it exists.

The 2014 F-250 (Lariat) has the handle on the side of the seats for folding down. I wonder why it is different on the newer MY and, based on one of the comments below, the 2011?

There are a few different brands out there especially on Amazon. I went with the Built Right because 'Merica and it was still less than $25 bucks I think. They also offer a few other cool mods I wanted so I saved on shipping. They make an "off-road" stubby antenna that's pretty cool

@PowerStrokeTechTalkwARod

3 жыл бұрын

Guess i f'ed up....thats literally what everyone is sayin......

@zachkuykendall1048

3 жыл бұрын

@@PowerStrokeTechTalkwARod lol nah you're good dude.. just check em out they have some cool shit

Thanks for the info. Just got an F250SD and while I figured out all the other seat bits, that left side back had me stumped. As a last resort I even looked in the owners manual and nothing about the backs, just the base. Even for the right side that has a release. How lame. I guess I need to buy a seat release tether, for a brand new truck. WTF Ford?

To me it seems like it’s the purpose put the seat now do you want a flat area and that thing sticking up on the way

Another great mod. I've seen these before but I forgot about them. Is there a lot of room to be found? Thanx Cuz

It should have been a standard from factory

I should have seen this earlier, spent an hour getting the seat down in a 2021 f150. Anyone know how to remove the error when the rear seats is completely removed?

Tool question...I notice you using them all the time. Where would you recommend getting impact hex and torx drive sockets? In search of a set.

@PowerStrokeTechTalkwARod

3 жыл бұрын

I get a lot of my loose stuff from Cornwell, they are great!

@BlackdogNY

3 жыл бұрын

@@PowerStrokeTechTalkwARod Thank you

HI FRIEND, WERE CAN I BUY ONE. MY 2020 F-450 PLATINUM NEED ONE. KEEP UP THE GOOD VIDEO 👍👍

@PowerStrokeTechTalkwARod

3 жыл бұрын

Thanks pal!! Search the internet...

Good video but garbage back seat design. My one owner 2005 F 250 Lariat has lever on side to lower seat back. Why did Ford change design? Was it needed for the new under seat tray that is for storage? My 05 has the metal fold out under seat platform to use for hauling chit in the back with seats folded up. Behind the seat is the storage tray for jack, tire iron etc plus behind the seat back works great for heavy winter coat storage, tow straps, jumper cables etc.......

@PowerStrokeTechTalkwARod

3 жыл бұрын

Good question...

@PowerStrokeTechTalkwARod

3 жыл бұрын

Wayy bigger

@65mach

3 жыл бұрын

@@SM-ut6vb I still don’t get why Ford had to eliminate the lever to lower the seat back. Just doesn’t make sense. Even if they gained more leg room, how much did they actually gain? And the idea that you need to raise the lower seat to get the back seat to come forward enough to get to the latch just seems like a poor design. Don’t get me wrong, the new Strokers are awesome rigs, if they weren’t literally double what I paid for my 2005 6.0 new I’d have one.

My 2016 has a handle, why do they keep down grading things.

Trying to think, why would you want to fold the seat down 🤷‍♂️. Seems the floor space you get by folding up is better in every way. What am I missing ?

@PowerStrokeTechTalkwARod

2 жыл бұрын

........

I have 2017 super cab. I can't get rear seat back to fold dow to install this release mechanism

@PowerStrokeTechTalkwARod

Жыл бұрын

Its therr....follow closely

If you slam it it will close with the seat down

Hey guys my 2015 f350 gave a p20BA code and I changed the heat today, its now giving all kinds of codes heater, fill level, heater line pump! Checked all pugs and all good, didn't know the pin to check power, the thought for me is that all needs to be cleared and start a fresh? It didn't do all this till I changed the heater and didn't totally unplug the pump from loop, AFAIRED of issues with plugs. Did cover all pugs and presser wash tank and pump? I am just a hand and not a computer myself. Its now 3 miles till 50 mile limiters! ASKING FOR HELP HERE! IS IT A code clearing issue? If was new pump , all else would not be putting up codes?

@PowerStrokeTechTalkwARod

3 жыл бұрын

U need to check that big connector again....& perform the exit procedure from derate. You ll habe 2 search my channel, busy buddy.....

@orvillewilkerson5432

3 жыл бұрын

tks, have to dealer inline for derate and ck Monday! Pug is all together, else there's a bad wire from power line, its all good! Thks agian

@orvillewilkerson5432

3 жыл бұрын

I have no power to my main plug on any pin? Could I have broken pin from wire pulling on it, surely its not that soft of connection???

@orvillewilkerson5432

3 жыл бұрын

Ok, dealer time, I am out! Tks for your input! Love your channel !

@PowerStrokeTechTalkwARod

3 жыл бұрын

Thanks guy!!

Do I need one for both sides?

@PowerStrokeTechTalkwARod

2 жыл бұрын

No

I removed my rear seat but now I get rear seatbelt monitor needs service indication can I get a wiring diagram for the seatbelt monitor circuit or is there a easy way to get rid of this message. Putting rear seat back in is not really an option

@PowerStrokeTechTalkwARod

2 жыл бұрын

Whatt

@mastercraftcc

2 жыл бұрын

I removed my rear seat from my truck and I had to unplug the electrical connectors at the seatbelt now I get the seatbelt monitor needs service on the screen on the dash

@PowerStrokeTechTalkwARod

2 жыл бұрын

Better check everything you disconnected...other wise ur gonna keep getting those faults

Little Baby F150. Lol RAM has a similar situation with the rear seat but no parts needs, just a trim of the seat back hook. Why manufacturers went to this is a mystery.

Knockoff builtright ind lol

Nooooo..... The little peg fits through the smaller hole on the red piece. The other brand has a plastic piece that snaps in place.

@PowerStrokeTechTalkwARod

3 жыл бұрын

Naw not this 1.

@eljefewappo7216

3 жыл бұрын

@@PowerStrokeTechTalkwARod The little hole should slide over the pin, it won't slide through the gap. Same as the look @ 5:22 kzread.info/dash/bejne/n4SnpZOaY9ivkps.html @Timbo_Slice is correct

@PowerStrokeTechTalkwARod

3 жыл бұрын

Mine wldnt fit🤷‍♂️

@rollyv2001

3 жыл бұрын

He's correct, instead of sliding into place. Fish it through the smaller hole for a snug fit.

@eljefewappo7216

3 жыл бұрын

@@PowerStrokeTechTalkwARod ok, I would drill out the small hole so it could fit over the pin with a snug fit so it does not rattle

What about the passenger side

@PowerStrokeTechTalkwARod

Жыл бұрын

Has 1 from factory. Where the jack is stowed

This is a cheap China knockoff where shit doesn't fit right. Get you one from BuiltRight Industries. They are the ones that invented this seat release and you can tell that it is literally a ripoff of their design. Plus, you are buying from an American company who works very hard and has a lot of cool accessories for the Super Duty! Matt, the owner puts a lot of pride into his products. Like you say, nothing but the best for your Super Duty!

@PowerStrokeTechTalkwARod

3 жыл бұрын

Didnt know there was a better one out there, sorry 😔

@ryan_torres

3 жыл бұрын

@@PowerStrokeTechTalkwARod No worries buddy, hope that this didn't come across as a personal comment towards you. Just thought that I'd let people know what to look for in the future.

@PowerStrokeTechTalkwARod

3 жыл бұрын

No sweat lmao...it literally seems like every comment has been tellin me about how crappy that was....NOW i gotta get a new 1.....🤣🤣 Are you Podcast material....email me....👍

@ryan_torres

3 жыл бұрын

@@PowerStrokeTechTalkwARod Now you gotta do a new video with the "gooder" one. 😂🤣 Thanks for the invite for the podcast but I'm not any expert... Not sure if that would be something you would want. I just know that I love my truck and always watch your videos to learn all I can about my truck!

@PowerStrokeTechTalkwARod

3 жыл бұрын

🤣🤣👍👍👍

This is why legacy auto will die. Terrible engineering