Focus XR5 ST225 RS mk2 symposer delete install
Автокөліктер мен көлік құралдары
Short video showing symposer removal and installation of blanking plug with replacement silicone hose.
Blanking plug available from:
focusonperformance.com.au/sym...
Step by step by OEM Denied Performance
Пікірлер: 27
Thank you so much! I was gonna do this to my XR5 and this video helped me out so much
@vincentreuben8000
3 жыл бұрын
instablaster
So THATS what's already missing on my XR5! I was wondering what was deleted? The butcher who worked on the car before just put a hardware store bung on it... (in it?)
really praying for you guys the clamp is not facing the way it was for me. had no way of getting to the prongs so ended up having to dremel it off
Hey Man where can i get the Picture at your video start in high quality. would be nice to have... Nice video easy doing with this Infos !
What size is the bung ?
Hi Great video. Would it be possible for a high pitched noise created by the symposer if there is a boost leak ? I seem to get the symposer making the correct noise but then is replaced by the high pitched noise and the symposer sound stops.
@TomS-mo1ox
Жыл бұрын
This is with increased speed. Car doesn’t lose power in any way at all and boost seems to be fine and working as it should. Car is stock
@OEMDeniedPerformance
Жыл бұрын
yes, usually boost leaks sound like a high pitched squeal. To confirm it is indeed the symposer remove it then remove the screws from it and split open - you'll see if its torn
@TomS-mo1ox
Жыл бұрын
Nice one 👍🏻 removing it tomorrow !
so will this effect the engine over a long period of time ??
@OEMDeniedPerformance
3 жыл бұрын
Symposer delete removes the symposer which is a common boost leak spot. If engine has a boost leak it will lack in performance and over fuel. Removing the symposer has no effect on the way the engine operates as it is unaware of the change.
@damo8754
3 жыл бұрын
@@OEMDeniedPerformance could the symposer leak lead to overfueling and under performing?
@OEMDeniedPerformance
3 жыл бұрын
@@damo8754 yes as its a boost leak so the ECU is reading air being drawn into the turbo via the MAF then some of it is escaping before entering the engine so engine will be running rich, throttle response will suffer and performance will lack due to the leak as its wasted energy
@damo8754
3 жыл бұрын
@@OEMDeniedPerformance im going to look into this next, only had her since November. Hopefully I can find out the issue, I've got an uprated boost solenoid to fit aswell.
@euanscotland
3 жыл бұрын
@@damo8754 how did you get on my man?
Do you think this could be retrofitted to a car that doesn't have it ?
@OEMDeniedPerformance
3 жыл бұрын
see no reason why not but they are usually removed due to being a common spot for a failure and a boost leak. Ford switched to using the stereo on the later Focus ST/RS and have a blanking plate where the symposer originally was
@GabrielSTEFAN943
3 жыл бұрын
@@OEMDeniedPerformance So they are 100% mechanical and not electronic ?
@OEMDeniedPerformance
3 жыл бұрын
@@GabrielSTEFAN943 yes. If you google image search "st225 symposer" it will show the internal workings of it
What’s the purpose behind the delete?
@OEMDeniedPerformance
6 ай бұрын
the symposer is a really common leak spot as the rubber inside it tears easily
@brownkiddy77
6 ай бұрын
@@OEMDeniedPerformance 👍🏽😊
@AmstaffOdin
Ай бұрын
@@OEMDeniedPerformancehola. Donde puedo comprar el tubo? No encuentro! Gracias.
@OEMDeniedPerformance
Ай бұрын
@@AmstaffOdin ¡Los vendemos pero el envío internacional te costaría mucho! Necesita una manguera de silicona con un espesor de pared de 3-4 mm y el diámetro interno debe ser de 34 mm. Debería poder comprar en eBay o similar.
@AmstaffOdin
Ай бұрын
@@OEMDeniedPerformancemuchas gracias amigo!