Installed this today and It was alot harder to do then it looked in this video due to the lack of space in the wheel-well. After about 2 1/2 hours and alot of cussing I got it installed and soon as I pressed the gas pedal I cracked a huge smile and realized how worth it that miserable install was. I love the way my car sounds now. This was such a great addon. It only took 3 days for CJPP's to ship it to my house. This video was all I used to assist me with installing the BOV I just wish it was as easy as in in the video too lol

@AntonioLopez-kw3ev

6 жыл бұрын

iaminea just installed mine today o do zero mechanic work used my dads tools watched the video and finished within an hour

@charlesgru8978

4 жыл бұрын

The Turbosmart one should have had an oring in it, mine did. That's something I learned the hard way long time ago to always check for on car parts.

@overshotorchid4880

4 жыл бұрын

currently installing mine and i’m about two and a half hours in, i’m almost done but i need a break cause it’s a huge pain in the ass

@stevecraven4596

4 жыл бұрын

I just finished. Took 2 hours. But it's worth every minute of it.

@nathanielx23

3 жыл бұрын

It looks like a bitch cause of the tight space.... lol

I see someone tried to take off with the E brake still on

@taye2427

5 жыл бұрын

😂😂😂😂

@Doty14

2 жыл бұрын

Came here for this lmao

@Bananahammock88

Жыл бұрын

Haha was gonna comment this

CJ Pony Parts Thank You for these videos! This exact part (the Turbosmart compact shortie dual port blow off valve) also fits my 2.0 ecoboost Ford Escape! The install was exactly the same (that top mounting nut is a pain!), with the same resulting sound ;) The Escape is now the meanest sounding grocery-getting soccer mom SUV in the city!

got mine in the mail today and will be installing it tomorrow fyi your videos on these st's are very informative

Worked exactly as the video shows...though I notice you skipped over the hardest parts of lining up the hole and getting that top bolt when the motor is still hot. :D I'm glad I thought at the last second to make sure the atmo vent was pointing down, not up into the engine bay. All in all, I was done in 45 minutes, with my son helping hold the flashlight. Sounds awesome, and this video was a HUGE help, thank you!

Thank you for posting these videos, my "installation CD" was damaged upon arrival so this was really helpful.

Man .......I watched this video 2 years ago , and bought it for my FOST , and now look back to what I be done to the ST , feels like a parents grow their child

Amazing install videos man...I have been waiting for some really good install videos for the Focus ST since the car came out and finally you bring them to me! Great work man! PLEASE KEEP IT UP!!!

Hey Bill, great videos. Loving this project car. The focus st seems really simple to work on compared to other cars. Keep up the great work, we do appreciate it!!

Did this mod yesterday. It was pretty easy, though I have relatively small hands. Great sound.

Just Fitted mine today, bit of a pain to get to but only took an hour, thanks for the video

Thanks for the sub, we will have a lot more ST videos coming!

@christurek28

4 жыл бұрын

Where does the flat edge of the BOV go?

Nice install, I really like the sound of that BOV.

Just order one from you guys should be here tomorrow so excited !

Just ordered mine today! Can’t wait to install it!

If your BOV is going off constantly you have a boost leak. I found that the bolts they send with the BOV dont tighten all the way letting air in and put of the seal. Use the stock bolts instead and apply a new drop of threadlock to fully tighten it. This BOV should not be too loud and not go off under 4 psi.

I was able to get this on with only a little trouble well worth it

Very nice vids, greetings from Cologne/Germany ;)

I said if you are planning on adding boost. The valve itself will not do anything to create power but its a much better quality part than the stock valve so it will probably add life to your turbo even at stock boost.

how many turns out from all the way tight (hardest spring setting) should the valve adjustment be for stock turbo/tune? My car is bone stock and I want to make sure the system vents just as much as the stock BPV so I dont run into an overboost condition.

How do you make sure this is tuned right? I just bought one and will be taking it in on Saturday and want to make sure that it is adjusted the right way.

I have a mazdaspeed 6 do I need to tune the ecu to install and run a bov properly or will it be fine with the factory ecu settings?

Thanks for another great video Bill. Is there a specific model number for the BoV unit you installed? I checked the TurboSmart website but they don't appear to have an ST specific model.

CJ you are the man

Subscribed. Great videos.

Just installed this using the video as a guide, thanks for the great information.

Hello, I have had this part on my ST for over a year now. Worked perfectly fine until recently. It used to make the turbo sound that is shown in the video, but now it doesn't even make a noise anymore. In order for me to hear it, I have to really step on the throttle and release. I'm not exactly sure what is causing the BOV to stop working out of no where. Any ideas? Thanks.

So, if that top part that the vacuum line goes into isn’t tight (connection moves freely) that’ll cause a leak and fluttering under wide open throttle?

Great vid, thanks!! Your last comment you say that it adds boost and sound, what do you mean by "it adds boost?" Makes the car accelerate faster? I mean, other than the cool sound it makes, would there be a noticable difference in performance perhaps?

Hi guys can u please tell me what other upgrades where installed on this st at the time the recirculating valve went in. Picked up my st3 couple days ago and already tweaking. Awesome videos man. Thanks

Hello, So I installed this on my 2016 fusion 2.0 and I am hearing sounds of like "whooshing" while i am using the throttle. Is this the cause of a leak? I feel like it might be. I accidentally installed the bracket under the bov rather than on top of it will that matter? I know the intake adds sound because when I had just the intake on it would whistle under acceleration/throttle but now it adds a second sound that like I said sounds like a "whooshing" sound. any suggestions? thanks so much!

Does the orientation of the actual component matter? Which side should the venting part be facing?

Is that silver bracket on top or under neath?

in what setting is 50/50 ? hard or soft? what is the best setting for the most loud sound from the bov? thanks

Hello. My Focus ST has been installed the Superchips Bluefin before.The turbo boost is higher than the stock settings.Is the dual port bov installing need to set the spring harder(tighter)?How harder should be? Please help me to set the bov's spring.

What setting should we have the valve at if we are just using it with an unmodified car?

We just installed this on my stepson’s car. Everything looks good. But he just told me he messed with the settings before we installed this. How do you know how, when and if it needs to be adjusted?

Can I do this to my 2014 Taurus sho? I'm looking to give it more boost as we'll. but I'm not too sure where the by pass valve is located in her. Any help would be appreciated.

any downside if I add the BOV to a totally stock focus ST? (lower MPG, not good for engine etc)

Does it work on the 1.0 ecoboost engine 2015 (ford focus)? Do you deliver to Spain?

We’re do you suggest the setting to be for a focus st with just a catback

Why do some people says it’s best to hook it up to a true vacuum line from the sound symposer delete? Opinions? Or is it just so it won’t be as loud?

Would putting the bov on the tightest setting cause any turbo flutter?

Is there any real difference between hard or soft other than sound when putting this valve in? I don't want to put on the max soft setting or vice versa and end up hurting my engine and/or turbo.

I just installed on my 15' focus st. I've adjusted the BOV to about 4 turns past all the way soft to get the car to idle properly.. I am hearing a fluttering sound, and not the whoosh sound the BOV is supposed to make. It sounds like I still have the factory BPV installed.. What's going on?! It's installed with the flat part of the BOV facing to the upper left if your looking at it. My car is still making boost, I don't think I have any leaks, I don't see any hissing or sounds coming from the BOV.. Any ideas?!?!

I have a 2016 st if I get the blow off valve do I need to tune the car afterwards

should I set it to hard or soft for a factory turbo?

can this valve install 1.6 ecoboost focus 150hp and how to now when spring is good tight?

What is the advantage to a half and half rather than a full vent to atmosphere bov

Nice. Hand brake was on.

Offspring you gotta keep em separated instrumental?

Will this fit on a 2015 ford taurus SHO. If not can you please add some suggestions. Thank you

My tuner installed this yesterday on my fusion 2.0 and he set the 'hardness' as far over as it can go. Is that a bad thing? I noticed when I floored it I kinda got a whoosh sound but it starts to hesitate at 5100rpm and when I went to overtake a vehicle it kinda jumped before accelerating. Should I turn it a little to the softer side??? Thanks in advance this has been a real headache

i hear a hissing from this bov.. occasionally it goes away and full boost is given, but most of the time it sounds like it's partially open... do i just need to take out the bov and clean it? or do you think it's some other issue?

I've been reading up on these, my only question is does it hold boost?

Will I pass smog with this on in CA? Installed the part yesterday

DOers this Dual Port and the Kompact Plump back from turbo smart have the same performance? And will you be doing a video on Turbo smart actuator soon?

Would this fit the 2014 fiesta st?

will this fit the 2014 escape with 2.0 EB motor?

So what if you are running a stock st but decided to go a little softer then factory will my car run a little rich ? Cuz it pshh just shifting it at 3k

The XR5 I believe is a turbo 2.5 duratec engine, completely different than the Ecoboost 2.0 in the ST. Blow valves are work the same in principle but I doubt the installation process will be the same.

Brought a used one of these and was wondering if they require an O-ring?

where can I find a stock replacement for this part????

this can fit on a mk3 focus st disel engine ?

Hi CJ PONY PARTS I'm am about to upgrade to an focus ST3 2015 as i cant wait for the RS any longer and would like to know if this BOV can be fitted in the same way to a British car version & can i get one from your web site and get it delivered to London.

What’s the difference in changing the tip to a vertical point?

i recently put this on but i only get flutter to pshh, is there any wrong

It will sound same louder without exhaust sistem???

Could this cause a check engine light to come on? I have a dealership blaming this part for causing my check engine light to come on.

should it make noise at idle if the vacuum hose isn’t attached?

does the car need an accessport or any sort of retune for this

Recently installed this part on my 15 Focus ST and immediately got a check engine light (P0246) being the wastegate solenoid high. Anyone had any issues or know how to resolve this issue? Can't find much online and trying to avoid a mechanic for the time being. Thank you

If i set it too soft or too hard is the car’s performance going to suffer ?

Just got my focus st tuned, turns out plate goes on top not bottom. I had a boost leak. I'm making 23lbs now

Thanks a lot man, i'm 16 and did this by myself! Subscribing for sure!

What is the Model of this BOV Turbosmart?

Does this fit a 2006 xr5 turbo 2.5l 5cyl?

can you put it on a stock focus st?

Pretty new to the car mod world but do you all know if replacing the stock valve with something like this voids your warranty?

so if i were to do this to mine, and something were to go wrong, would i be able to swap the factory back on for warranty?

@jbailey1187

10 жыл бұрын

Yes. Absolutely. Just make sure you keep the original one and remember which way the pieces go.

So all you have to do is remove the passenger side wheel to do this job!? You guys made it look so easy but according to some they said it was a pita trying to install the new bov in such a tight spot. Also, this can adjust to 100% recirculate right?

Hey Bill, Which way is the flat side of this BOV supposed to face? In the "Spool" video you made you made a comment to have the flat side facing up on the turbo. Does this hold true for the Dual port BOV?

@lilreddy6669

9 ай бұрын

Did you ever figure out what side the flat faces? 7 years later trying to figure why the car makes a terrible noise after I installed it.

Planning on buying those from you guys but I have one question, how much more different is the install on a 2016 Focus st?

@Jdewar93

6 жыл бұрын

Martin Valencia should be identical. Power train hasn’t changed at all on the “facelift” STs

Is this BOV available for midle east of Asia, I mean "Kingdon of Saudi Arabia" country?

There is not a lot of room to work but overall it wasn't bad to do at all, took less than an hour and that was filming the install. I am sure it could be done in around 30 minutes since there are really just 3 bolts and a clamp to remove

How often do these need maintenance ?

Its good for tdci?

Is this with a symposer delted areafy ?

Will it void warranty.?

Haha is it just me or does the bgm kinda sound like "come out n play" by the offspring?

@FroJoe999

6 жыл бұрын

wintersun2k Im 99.99999% that it is lmao

@jwuonog

5 жыл бұрын

Like a generic version of it

@hellcat9246

3 жыл бұрын

You gotta keep em separated

I am having trouble getting the sound to come out smooth how exactly do I adjust the bov and how do I know how far it's suppose to turn?

@oprzgamer2594

3 жыл бұрын

I’m having the same problem did u fix it?

When under low pressure it seems like it doesn't shut fast enough it's releases air and then when the rpms go down it finally shuts. Is that normal or does it need to be tighter ?

@GoodChicken01

5 жыл бұрын

SOTHICK RICK to my knowledge, a harder spring will cause it to hold more pressure, giving you a “sharper hiss” while a softer spring holds less pressure, giving you a “less sharp” noise

do you have to tune for this if stock

@Zerogivengarage

7 жыл бұрын

No you do not.

Can you explain the harder and softer settings? I a getting ready to replace these in my 2012 F-150. I live in Georgia

@Zerogivengarage

9 жыл бұрын

You can adjust for different pressure. Softer will open up easier for lower pressure. Best thing to do is adjust them until the truck idles properly and leave them alone. Some people like setting the spring soft so it blows off all the time.

i guess will work on the 2012 too right?

so this fits the volvo c30... could you guys make a video on installation for it?

@brianleach1866

6 жыл бұрын

Shaner9er any clue if it would fit a 2004 saab 93?

How soft or hard should mine be living in the Northeast?

Does anyone else get some turbo flutter with thos bov im worried i might be set to hard and maybe should loosen it

Do you need to reprogram anything after installation? or does it require or needs to be tuned after the installation?

@IIISWILIII

6 жыл бұрын

nope

How the he'll did you get the top bolt. I've been trying for an hour and I can not get to it

@tardis4125

7 жыл бұрын

I give up!!! It's impossible I can't get that top bolt, I'd rather pay someone to do it