game changer being able to remove the engine from the front..and not have to lift over the frame or drop it below (not all of us have lifts). I run the BNR3071, XDi hpfp, RS injectors, and am likely around the 430whp mark.. the ringlands failed on cylinder 1 recently after about 10k miles on the big turbo set up.. i have good PCV/OCC set up, change oil regularly, use Mobil 1 Synthetics, etc... these engines just werent meant for that kind of power. Going with a full Manley rod/piston set up so hopefully I can up it to 500whp (with XDi injectors) and get a lot more miles out of it this time!

I need to pick up a new engine for my fost and came back to this video because I thought I remembered you saying you picked the long block with your st. Confirmed! lol Thank you for all your videos!

Congrats Trey! That breath and look right before the first crank was the most suspense I've felt on youtube.

@tbr.performance

4 жыл бұрын

NinetyOneOctane: The Podcast It was a very stressful moment hahaha

Yooo...I get excited when I see a new vid of the ST. Happy for ya man. Can't wait to see what you can do with her on the track.

@remycanaan3168

2 жыл бұрын

instablaster

Sweet. Can't wait to watch bro. Thank you for sharing.

Nice job ,been watching from the start and looking forward to what's to come .

That was a great journey to follow. Can't wait to see you max it out.

Good to see the motor is semi easy to pull out. Throwing the Focus ST drivetrain in my transit connect soon

@sategllib2191

2 жыл бұрын

Did you do this?

Congrats bro, can't wait for the next video

Hell yeah man!!! Happy birthday too🎂🎉. Glad to see it all come together for you

Wow congrats!!! 👍👍👍. you know your stuff bro !!!! Keep it up!!! Proud of you!!!

My brother! Glad its up n runnin. In the process of bulidin mine too. Youve helped me out alot so far with your vids man. Congrats! Much love and hopin everythin goes well.

Stumbled across ur video! First time viewer and now a sub! Love the focus I got one myself! Hello from the UK!!

Glad its back together, I was just thinking about this build and wondered what happened

I know who to contact now when I do my ST. Great job man 👍

Dam bro love your build can’t wait to see your track videos

thank you for the video, it was awesome

Nice work man!

Happy Bday :) Mine was actually yesterday the 8th the day this video was released.

This has to be a relief for you. Now it's time to enjoy it

Good work bro 💪🏾💯🚗💨

Great job 💪🚀💣

Hey man this is awesome! Im getting ready to do a 25 swap in my 05 focus st

Happy Birthday Trey

Hey, I see you there in red 👀 lol, anyway I can't wait to rebuild the motor in my ST. 2013 Tangerine Scream. Ringland failure. Sad time.

Does engine swap on his birthday. What a Legend

Love the Marine Corps flag Oooh Rahh

Where you from man?? You got great info!

Fuckin aye bro! Getting ready to mod my focus sedan soon. 2.3 stroker, 98mm turbo, 3inch catless downpipe to go with my 2.5 catback setup, stage 2 cams and a manual swap to seal the deal

I've done this to my 96 mustang gt a few times. Now have to do this because I think my slave cylinder took a shit. Kinda worried, never messed with fwd or had to pull an engine on something this new

Clean build can’t wait for the pills and Dyno?

Hello do I have to consider what the airbags do not deploy when I dismantle the front? Thank you

My break in on my built speed 3 was completely different. Break in oil for 5 min at idle. Then first 100 miles on break in oil at 10 psi. Then to 500 miles at 15 psi. Finally went to synthetic at 1k but ran varying rpm under load the whole time. Black stone lab said oil was perfect compression over 50k has stayed at 200 psi on all 4 at 500hp. No perfect way but definitely different

Congrats bro on finishing your build i am in the process of doing a 2.3l diy stroker on my FoST. Mods:ETS RS 5" intercooler, af dynamics intake with k&n filter,megan 3" dp with custom 3" catless exhuast,custom intercooler piping, with diy 4 port injection soon 2.3 stroker & pte5858

@tbr.performance

4 жыл бұрын

IamPAPI 31 Ooooo that setup is gonna rip!!

@swavysora819

4 жыл бұрын

U should put a boomba bov aswell

@boostaholic5471

4 жыл бұрын

Swavy i dont like the boomba bov i perfer a tial 50mm

Any links you can share to help to show how to remove the engine?

What engine did u swap?

What engine did you swap into it?

I have a 2016 ford focus Titanium with a 6 speed manual transmission. I have access to a low miles 2016 ford focus st engine and 6 speed transmission. Will it fit in my Titanium hatchback?

Hey VC did you removed the Balance Shaft from the engine and is there any noticeable vibration at all? What HP and TQ gains did you get with the new engine? Great vlog man!

@tbr.performance

4 жыл бұрын

Angelo Lopezcua The response from the engine is unreal without the balance shaft. No extra vibrations at all, granted I’m still on stock mounts. Well worth the hassle if you do it in the car. The lighter rotational assembly contributes to that as well. We’ll be putting her on the dyno pretty soon so we’ll see what numbers we get but the main focus is to get her running efficiently and have the power when I want it.

If ur worried about piston noise already, ya know forged pistons arent gonna last anywhere near as long as a set stock pistons. Did you do 4032 or 2816? Other question so have you done a compression test since adding mileage? One thing i got from my tuner with building my ms6 was i did compression tests, starting at 500,2500, 5000, 10000, 1300,17500 etc...basically every oil i do one now on my focus st also. Its a good way to monitor every thing is still working correctly cause if you monitor it like that the first time you notice a 10 or more psi difference outta nowhere especially a difference 10% difference from the rest of the cylinders you can get it checked immediately before you go and score the shit out of your chambers.

@tbr.performance

4 жыл бұрын

Pumpkinspicelatte 17 4032 mahle pistons were used. I’ll be doing an update video including a compression test and in car footage. The engine is officially broken in now so next step will be the dyno. The engine sounds very healthy and the pistons only make noise when it’s been super cold but once it gets up to temp all the noises go away. I’m super excited to see what she can do!

Running in with no load will polish your honing before the rings bed in. Best run in undet load, and not late at night! Would hate to be your neighbour man.

Happy bday....3 years late. Haha

Yo what tune did you run when you were breaking in the motor?

@tbr.performance

3 жыл бұрын

Just my stratified tune. I ran the car twice on the break in oil then ran it for 500 miles with conventional.

Hey man I was looking for some advice on my Range Rover Evoque build. My car shares the same engine as the Ford Focus ST (stock) and I had some ideas on what I wanted to make my build as powerful and effective as possible but I'm concerned with reliability. I currently have a decent enough exhaust system on the car, the rest stock atm. My plan so far was to have the big turbo system installed with the larger turbo option. This is so I can then use an electric supercharger (TorqAmp) to delete the turbo lag issue so I could realistically have the best of both worlds when it comes to having a bigger turbo. I also wanted to do cams for added power since it's fairly inexpensive when considering $ to power ratio. End of the day get a tuner to finish out all the inputs and components when it comes to tuning to keep it under control. With all these components a cold air intake as well as upgraded air filters are necessary but I'm not sure what else to consider after I'm there. I'm looking for more input and advice since I dont have much experience working with this engine and am fairly new to engine work. Let me know what you think, thanks 👌

@tbr.performance

4 жыл бұрын

Brandon Durand I would recommend upgrading the turbo if you want more power for the top end. The stock turbo is not fitted for big power especially if you’re gonna be doing head work. As far as the electric supercharger, I wouldn’t even bother. The stock turbo is very responsive and even if you get a bigger turbo like a 2868r, the spool time isn’t bad at all. The only way to get rid of turbo lag is to use nitrous and recirculating the charge air back into the intake. Idk what the long term plans are for you but using the stock turbo and an e85 blend, you’ll only ever see maybe low 300’s for horsepower and it will all be at the beginning of the power curve.

Call me dumb but what engine is that?

Where you guys from? Central Valley? Fresno?

@tbr.performance

4 жыл бұрын

Miatacrosser Temecula Valley

If you don’t mind me asking what kind of engine did you switch it to

@tbr.performance

4 жыл бұрын

Phil It’s the same engine (2.0L ecoboost).

@SPIDERMAN2015

4 жыл бұрын

Because I was wonder if I could be able to get to unlock the engine and I don’t have to go to ford and ask them to fix the car and I could do it my self do you pay for the software or did you find a way around it if you don’t mind me asking thanks you for your time

Hey man i know you probably get this alot but who tuned your car. I live on the central coast of cali and would like to find a good tuner for my ST.

@tbr.performance

4 жыл бұрын

Alexander Hibbs Stratified Automotive!

@alexanderhibbs3331

4 жыл бұрын

@@tbr.performance thanks!

You should have it done in six hours

Is priming the motor with the starter an okay thing to do? Does it hurt the motor?

@tbr.performance

2 жыл бұрын

Nope!

@sategllib2191

2 жыл бұрын

When the engines off the oil is all drained away from the cams and valve train. Prime it and get a bit of oil up there so when it's idling at a much higher rpm it's lubricated a bit

Are you In south east texas?

@tbr.performance

2 жыл бұрын

SoCal

Did you guys need to do an engine build because the old one blew up, or did you just want a built motor?

How many lube techs does it take to swap a motor?

8:36 just shovin it in there😂

How much did I cost to build this engine?

@chrisellix4187

3 жыл бұрын

*It

Where are you based? Subbed

@tbr.performance

4 жыл бұрын

Chumad Temecula Valley CA

@hodg1gaw

4 жыл бұрын

@@tbr.performance dope. You guys hit up big meets or cruises. I just got a Fost a month ago... and a Cobb AP today 😬😬

@tbr.performance

4 жыл бұрын

Chumad We don’t really go to meets too often but we host them occasionally! We’ll post the meets on our Instagram.

@hodg1gaw

4 жыл бұрын

@@tbr.performance thanks and FOLLOWED

have you heard about our lord and savior brian tyson from JSTperformance? theres a reason we call him the wizard

Six pucks are garbage. I couldn't drive another one.

@tbr.performance

4 жыл бұрын

Jeremy Luder It’s actually not bad at all!

Doesn't even sound good....

@IIIVI

4 жыл бұрын

Damn bro, its almost like nobody cares. It's also like what other people like is up to them 🤣

@IIIVI

4 жыл бұрын

Where's your car tho? Lmao

Hello do I have to consider what the airbags do not deploy when I dismantle the front? Thank you