About to make my first Architectural model for final presentation. Thank you so much for really improving the quality of my work. Been practicing with the different techniques.

@TheTerrainTutor

6 жыл бұрын

Awesome mate, good luck!

Thank you for sharing your skills with us. The bevel looks best in my opinion 🥰👍

Never thought of continuous bevel, would have made a project so much easier. Lots of great ideas Mel. Thanks.

@TheTerrainTutor

10 жыл бұрын

No worries matey

About to start my first foam board building, great video, thank you, I subscribed.

Great Tutorial, looking forward to trying out some of these techniques once I get started on my own builds.

@TheTerrainTutor

10 жыл бұрын

Excellent, let me know how you get on mate

Just the tutorial I needed! Thanks!

I'm gonna try and build some buildings today. Thanks Mel!

@TheTerrainTutor

6 жыл бұрын

Crack on!

love the foamboard buildings series. I've been watching them all day! Just a quick thought that might help, you can do this in 2 ways: 1st, head down to your local matting and framing shop with you foamboard, smile at them and ask them, "Can you do a 45 degree bevel cut on these please? I just need them cut in half at 45 degrees." The will smile and say, "Sure! What's it for?" at which point, you tell them what you need it for, they come up with other great ideas and you make a new friend. Option 2, go to the local craft store and buy your own matte cutter that does foamboard and forget about new friends. just have them cut in half at 45 degrees and then you can use opposite sides when building your buildings. The new friend method gets the help of someone who has several repetitions doing it and a higher quality matte cutter. the higher quality cutter will also get you different angles like 22.5 degrees and 67.5 degrees for some more diverse shapes. Quite often you will get a very experienced framer who can cut out the whole model in a few minutes with interesting bevels in the windows and doors and all kinds of flare. They probably would enjoy doing it because most of them are artists who matte and frame to pay the bills and the chance to do something creative will get them excited.

@TheTerrainTutor

10 жыл бұрын

Family Mini Gaming I'll give it a go matey, thanks for the heads up!

absoluty great vids, im learnig so much as a beginner in making models

@TheTerrainTutor

8 жыл бұрын

+Mark Leenders Glad it's helping bud :-)

Very helpful video Mel, Another good way of hiding a join is to use a piece of 6mm square balsa wood as buttress on the corners. You can even keep it as a single piece of foamboard.

@TheTerrainTutor

9 жыл бұрын

Dan Cain Yeah, I remember seeing Viv do that in one of his tutorials, nice technique.

Very nice examples, thanks. I had used a bevel technique, but cutting each piece with 45degree knife and then glued two pieces. I just looked up the rabbet cutter on Amazon and they are only $20 and that seems well worth it.

@TheTerrainTutor

6 жыл бұрын

Glad it helped bud

Your videos are usually great but this one is really up there! Maybe you should add this one to your basics playlist?

@TheTerrainTutor

8 жыл бұрын

+soundwave810 It's always a struggle picking which playlist vids should be in lol

Nicely done and very informative.

@TheTerrainTutor

9 жыл бұрын

john volker glad you found it helpful mate

Thank you for this video!! It was so helpful

@TheTerrainTutor

7 жыл бұрын

Glad it helps, hope the rest of the playlist is as helpful bud!

GREAT VID!

for some reason I can't find ANY informative videos on the internet regarding foamboard THANK YOU SO MUCH THANK YOU THANK YOU THKNA OY

@seang3841

8 жыл бұрын

Hey google flite test and look at their free builds it's for planes but I use the concept for my buildings and walls really clean corners.

@hermanli3143

8 жыл бұрын

thank you!

I don't know how he does it - my rabbit refused to make any of my joints for me and he couldn't even hold the craft knife properly with his paws.

@josephpostma1787

2 жыл бұрын

We've had up to 40 rabbits at my house, the living kind.

another great tutorial! thanks for this :)

@TheTerrainTutor

10 жыл бұрын

No worries mate, glad you liked it

For cutting rabbets/rebates* in foam core, it's pretty easy to put a depth gauge on the blade of the knife. A couple of thin strips of gaffer's tape around the blade at the depth and angle that you prefer works pretty well. If you're doing a lot, soldering a wire on either side of the blade at the right place will work even better, though that's obviously the more complex technique. Alternatively, a box cutter can often be set at the perfect depth for reliably cutting the foam without cutting the face paper. They're designed for opening boxes without cutting any of the packaging inside, and it turns out that the walls of those boxes are quite close to the thickness of foamcore. Both of these will dull the tip of the blade more quickly than usual, as you're only using the tip for cutting. * I think "rabbet" is the current US term (though it came into the language from French in the 14th century) and "rebate" is the more common current British term.

@danapeck5382

6 жыл бұрын

nice to see someone use "rebate"!

@jonnyone-truck2460

6 жыл бұрын

+5 points for using gaff tape :)

Good video and ideas for making wall corners.

@TheTerrainTutor

10 жыл бұрын

Thanks mate

Great tutorial Mel.

@TheTerrainTutor

10 жыл бұрын

Cheers matey

very useful. ty sir I will apply these tips next time. the problem i did with my foam board is using a knife that was too thick and it ended up sticking/pulling the foam and giving me very uneven cuts, the exacto style knives are always best for the job.

@TheTerrainTutor

10 жыл бұрын

Cheers matey. You'll probably find that those are caused be a too higher cutting angle. Check this mate ... kzread.info/dash/bejne/oWmlqsikd6aZZ9Y.htmlm52s

Good tips matey

@TheTerrainTutor

10 жыл бұрын

cheers matey

great tutorial, nice tips and tricks :)

@TheTerrainTutor

10 жыл бұрын

Cheers mate

Great techniques buddy.

@TheTerrainTutor

10 жыл бұрын

Cheers matey

cool tips, I want to do an imperial guard bunker and wondered how to do a beveled surface on the wall openings

What's the best filler to use for this thx great video

Good info

Great video!! Cant wait to use it to make some walls for Infinity the game. question though... What kind of glue do you like to us to keep a nice firm hold? I plan on doing the Beveling method.

@TheTerrainTutor

7 жыл бұрын

PVA mate

For perpendicular lines...use a small Square you can get them from micro Mark

Howdy there Mel, just a quick question. In my unfailing quest to find the perfect hobby knife handle, I've purchased a few that looked comfortable but when I received them them were sorely lacking. I just noticed the one you used in this video and am wondering if you recall the manufacturer and model of this Hobby Knife? Any clues would be helpful. Thank You for your tutorials, they are VERY helpful and entertaining to say the least...

How would you cover the top foam part then ? I was thinking about using paper, but the texture wouldn't be the same

Great tips.

@TheTerrainTutor

10 жыл бұрын

cheers mate

They make adjustable mat board cutting knives where you can set a beveled edge. I wonder if that would work?

Thank you! Now I understand how to hide the joins! I only use Balsa Wood on my models and I think Filler is going to be my best choice! I've been searching for tutorials on Architectural Models, unfortunately, I did not find any..

@TheTerrainTutor

7 жыл бұрын

Hope the rest of the foamboard playlist is just as useful mate

@joshjohnston7388

6 жыл бұрын

I am using filler (we call it spackle in the US, for skinning gypsum wallboard) on Mel's recommendation and it is such a good tip. 3.5 gallons for about 9 dollars and it's enough to.... well it's enough. It'll dry out long before I use it all UNLESS we decide to remodel the basement sooner rather than later.

@ritawashere5787

5 жыл бұрын

@@TheTerrainTutor hello, in America is the filler essentially spackle that one would use to cover holes in their inside walls before painting? I make projects which foam core board yet I need to find something to make the edge look more finished. So I was thinking the filler might be my best option. If it is not the same as spackle would you please let me know what the filler is that you use? Thank you in advance for your help I truly appreciate it. Have a beautiful day ❤️ I have not found any information on making the edges of foam core board look more finished online anywhere. Yours is the best and dare I say the only. Thanks again.

this vid is realy usefull! Cheers, Ian

@TheTerrainTutor

10 жыл бұрын

Thanks mate

Very useful tips

@TheTerrainTutor

10 жыл бұрын

Thanks

Very nice collection. I prefer the 45° angle solution, but normally cut through the board.

@TheTerrainTutor

10 жыл бұрын

I'm not good enough to pull that off mate lol

@DerMartexus

10 жыл бұрын

I need to send you some girls to cheer for you. ;)

Awesome tips Sir. Really helpful. Thank you so much. ^_^

@TheTerrainTutor

10 жыл бұрын

No worries mate, glad you found it useful

What type of filler did you use? I am using foam board for a ceiling and looking for a way to remove lines.

I have pretty much done the beveling, I think I'll try in one piece, I've just covered the corner with glued on paper on some pieces, rabbiting in one piece would take some time figuring out the measurements.

What is used for your filler?

your a good person.

@TheTerrainTutor

8 жыл бұрын

+Katie Hunter I try to be :-)

Hi there, Nice and very informative tutorial. Could you please tell what filler did you use? I heard that most fillers will eat the foam? Thanks and Well Done again!

@TheTerrainTutor

8 жыл бұрын

+MeC Photographers Fillers won't harm the foam mate, there's no solvent in them. I use B&Q's home brand, Diall I think it's called

@mecphotographers307

8 жыл бұрын

Thank you very much Mate! I've tried them and worked just fine! Again well done! M.

Nice tutorial... very informative... BTW, what filler are you using?

@TheTerrainTutor

10 жыл бұрын

Thanks mate, I use Polycell's Polyfiller but most good fillers will do

In the past, I have used cardboard to hide my basic joints. Was good an functional, yet made everything look like a shipping container... ;)

@TheTerrainTutor

10 жыл бұрын

I've seen that done with cardboard and plasticard, I think it looks pretty cool mate

Thank’s a lot for your sharing, I know « Foamerks » with lot solutions but so expensive and I thing you’re in the good reality. Sorry form my English, I’m a real french and speak‘s isn’t easy. Sam 💚 Pyrénées

If you know anything about woodworking, many of the same or similar techniques work with the foamboard. You could join them with box joints I'd bet, though it's a little bit of work

@Squawman999

6 жыл бұрын

I personally prefer to dovetail my edges.

@terraintutor What do you use as filler?

@TheTerrainTutor

7 жыл бұрын

Diall ready made filler from B&Q mate

Great video, just one advice. Your ruler is not a scraping tool. You probably realized how fast that foam dulls sharp blades. It will take away a little material from your ruler. You might still use it, but don't use the "0" end where precision counts.Same is true when scraping with the blade, if you scrape with the backside, which usually works even better, you don't kill your blades as fast.

what is that green board with the lines called? im trying to find it

@TheTerrainTutor

7 жыл бұрын

self healing cutting mat

the Americans call it a rabbit, us British people tend to call it a re-bait. and a "continuous re-bait" is called a dado, actully... after re-watching the video its not really a dado because you are folding it back on its self..... what you cut though was a dado.. And the bevel is called a miter en.wikipedia.org/wiki/Rabbet en.wikipedia.org/wiki/Dado_(joinery) en.wikipedia.org/wiki/Miter_joint They are methods used in carpentry for centuries :)

hi, i was wondering if you could use an envelope opener to obtain one of the flaps.

@TheTerrainTutor

9 жыл бұрын

julio ramirez peña Can't see why not matey

@julioramirezpena9510

9 жыл бұрын

mainly because envelope openers tend to be slimmer in gap than the thickeness of the tool

"...and ladies." HAHA. Politically correct Mel. I just had someone start a High Elf Army of the female gender in my vicinity. It happens. I wish I had foam board around here because this tut was excellent man. Awesome techniques.

What type of filler?

The second technique is what would be called a rebate joint or shoulder joint in woodworking. (The Americans seem to call a rebate a rabbit.) The final joint is a mitre joint.

What is that material

I was thinking of just gluing paper over the building and cutting it on the corner, so I only have one edge to hide. These are good options though.

@TheTerrainTutor

7 жыл бұрын

That'll work well

What if we use 2mm foam boards ? Would the problems be solved ?

@MobbingQueen-ty3bh

9 ай бұрын

I’ve found a better way ! Use blade #11

You are the foam bored king. lol :-) Do you do or will you should I say.. be doing a vid on interlocking joints? Or would you consider it an impractical idea? :-)

@TheTerrainTutor

10 жыл бұрын

LOL - I wouldn't say that mate but thanks. I'll probably cover it at some point but it's is a bit impractical considering the amount of cuts you have to make.

45 degree picture mounting card cutter

Yeah

"engage the brain!" :D

@TheTerrainTutor

10 жыл бұрын

I do have to tell it sometimes, occasionally it listens mate lol

It is Tuesday my dudes

That's what I was thinking, but atm thinking ain't a strong point lol :-)

@TheTerrainTutor

10 жыл бұрын

lol, join the club mate

Is that gatorboard or something else?

@TheTerrainTutor

6 жыл бұрын

Foamboard mate

@GryphonArmorer

6 жыл бұрын

TheTerrainTutor Thanks Mel. I think I have it straight now. Not sure how it on your side of the pond, but I now realize that here there is "foamcore" (foam with paper sheathing) & "foamboard" (foam with cardboard sheathing). Thanks for all your videos. You have inspired me to start putting my artistic abilities to use. I scratch built a seven piece 28mm rock wall set and molded it for "mass" production (actually more like quicker production) and listed them on eBay. I've had lots of lookers but no buyers yet. I'm guessing it takes a bit for people to bite on a new seller, so I'm just working on expanding my product line and keeping my fingers crossed for customers. I think sometime in the next few months I'm going to make some "this is how I do things videos" and see how it goes. Again thanks for the inspiration and keep up the awesome work.

I'm still lacking with my wonderful cutting ability lol

@TheTerrainTutor

10 жыл бұрын

Practice makes perfect mate, keep at it!

@Thejmg2011Blogspot

10 жыл бұрын

I did a hangar by watching your videos. Pass by my channel if you have time.

@TheTerrainTutor

10 жыл бұрын

Cool, i've subbed you and I'll check it out mate

Mr Terrain Tutor, first of all i would like to say that your videos are inspiring so much so my brain is melting with ideas. When it comes to cutting you foam core, have you thought of using any of the foam core cutting tools? Here is a link to a place i found that has these tools (although they seem pricey) www.cavalierart.com.au/catalog/boards-and-cards/foam-core/foam-werks-foamboard-cutters Hope this helps, keep up the fantastic work.

@TheTerrainTutor

9 жыл бұрын

Salem Ravenwood I've seen them before,just haven't been able to get my hands on them yet.

sup elim peps

@matt-ey4ej

7 жыл бұрын

Levi Davidson Suh dud

its rebate, the Americans call it a rabbit

Rebate