Hey everyone, if you're looking for the files on FNIRSI website and can't download a thing, FNIRSI passed this google drive link ( drive.google.com/drive/folders/1pZpihFrJUjU4yLVAIxwlofwE2l2trW39 ) where you can download everything you need. Enjoy!

@Rk3ARF

Жыл бұрын

where is the application to it I have with bluetooth

Fun fact for you. You can actually update FNB58 without a USB micro cable. Just hold the OK button and plug it straight into a PC. Moreover, you can update with a Type-C cable too! I think bootloader mode works on all input ports!

@TechCornerTV

Жыл бұрын

Hi, thats good to know... nice tip! Thank you for sharing and watching! 👍

@Condemned87

Жыл бұрын

Thanks! Thats a great hint.

@JAKOB1977

Жыл бұрын

roger that, seems there is a new 0.68 fw released.

@kmilgram

11 ай бұрын

Thank you for posting your helpful comment. For some reason, I cannot get the USBmeter.exe application to recognize my FNB58 USB tester. I tried connecting to it two different ways, and neither worked. The first attempt was via a micro USB cable plugged into the PC port on the device. The second method was plugging the device in directly to one of my laptop's USB ports. Then, after reading your comment, I put my FNB58 into bootloader mode by holding the "ok" button and plugging it in via the micro USB cable, again, plugged into the PC in port on the FNB58. The USBmeter.exe software still didn't detect it. However, thanks to you, I was successful on my final attempt. I held down the "OK" button on the FNB58 and plugged it into my laptop directly via its USB-A connector. Almost instantly, the USBmeter.exe application recognized the device. At that point, I was able to follow the instructions in this video and get my firmware updated. Thanks again!

@BartSzczepanski76

10 ай бұрын

@@kmilgram I had exact the same issue but after connecting directly to USB socket (PC) when holding OK button an app was recognized and went straight to a bootloader mode - after that I could open the Fnb58V0.68 file (doesn't have to be in the same folder as the UsbMeter application) and flash new firmware. Cheers!

Thanks for the instructions! And I was using it without software 😅 now I will try the software and see some new great features with this USB meter🎉

Thank you very much for making this. Would have found it eventually but this makes it really easy!

@TechCornerTV

9 ай бұрын

Glad it helped! Thanks for watching.

Thank you so much, I'm updating mine right now, your video is excellent.

@TechCornerTV

Жыл бұрын

Hi there, glad it helped! Thanks for watching.

Thanks for all your good work in here

thanks for the straightforward video on upgrading the firmware

@TechCornerTV

7 ай бұрын

Hi, sorry the late reply, trying to keep up with the comments, not easy. You're welcome and I'm glad it was useful. Thanks for watching.

awesome, I bought one and will update it when it arrives.👍

@TechCornerTV

Жыл бұрын

Hope you enjoy it! Thanks for watching! 😃

thank you used this for my fnirsi 153

Thank you. very helpful

@TechCornerTV

11 ай бұрын

Hi, glad I could help and thanks for watching!

Thank you very much! Thank you very much! Thank you very much!

@TechCornerTV

Жыл бұрын

Hi Daniel, glad it helped! Thanks for watching!

Thanks! Very helpful. Quid pro quo👍

@TechCornerTV

11 ай бұрын

Hi! Thank you so much, your help is really appreciated!

Thank you! Can you explain how to set the device (and what cables need) to metering charging voltage and currrent? In addition, when you use the small PD button?

@TechCornerTV

7 ай бұрын

Hi, sorry the late reply, but it's not easy to keep up with the comments, you don't need much, just put the device between the power supply and the charging device (example: a mobile phone) and it will display the voltage, current and watts being consumed. The cables are the normal cables, connect the mobile to the FNB58 and usb cable to the power supply. I have a video where I review and explain how to work with it ( kzread.info/dash/bejne/opqJxrFmncKco5c.htmlsi=2cVWt3fgfyNCld1e ). Thanks for watching.

When I plug in my powerbank the Unit display error code 02. Does not open the main interface.

Very nice

@TechCornerTV

Жыл бұрын

Thanks for watching! 😁

You have the perfect Borat accent. Upvoted ;)

@TechCornerTV

8 ай бұрын

Hello! Ahahah... this is the first time I ear that, but thank you! I do love the Sasha character... thanks for watching!

Thank for your tutorial, im updated successful to v0.63, from your video i know how to enable bootloader mode haha🎉

@TechCornerTV

Жыл бұрын

Hi, Great 👍! Glad it was useful, thanks for watching!

Hi TechCorner, I recently purchased the FNB-58 USB tester. There are a few glitches, but in general I like the product. Wanted to see if others are facing the same problems I am: 1. with the FNB58 connected to the PC, and the recording software ("USB Tester Tool") running, I find that the recording software abruptly stops communicating with the device. This happens after about 20-30 mins of recording. Everything just freezes on the software side. The device itself still works fine. I am running v0.0.6 of the software (I think the 'About' tab erroneously says v0.0.5), and v0.67 firmware on the FNB-58 2. The bigger issue is that after about 1 week of use, the FNB-58 screen suddenly went blank. I see nothing on the screen, and the navigation buttons don't produce any beep. The device connects fine to a computer, and I can see all measurements, but nothing on the FNB-58 screen. I know the screen is working, because I can boot the device into bootloader mode, and see the update instructions there. I tried re-updating my device - the re-flash completed, but still, nothing on the screen when I try to boot in "App Mode"

@TechCornerTV

Жыл бұрын

Hi, for what you describe in point 1. it should be something like out memory or something like that. Point 2. yeah, you have a problem with that unit. For either problem, I will advice to contact FNIRSI by Whatsapp channel, you have the QR code in their support page. They're quite responsive (please consider the time zone difference) and normally they will give you a solution. Thanks for watching!

How about another more advanced video giving more in-depth explanations like what each protocol acronyms are, how and why one would use triggers, the PD listener the PD converter or the USB-C E-Marker? Perhaps, you could make a tutorial on how you would use the FNB58 to diagnose a real world problem?

@TechCornerTV

Жыл бұрын

Hi, I have the review video here kzread.info/dash/bejne/opqJxrFmncKco5c.html , doesn't show real world examples yet, but you have a much more detailed explanation on the device. The main problem for me now, is the time to record new videos. Between my job, the channel , my new house construction and family, I don't have almost free time to research. Thanks for watching!

Thanks for very useful video!

@TechCornerTV

6 күн бұрын

Hi, glad it was useful and thanks for watching.

Can anyone tell me where I can read on the FNIRSI FNB58 whether a device supports PPS? The device should actually be able to read this, but I can not find it.

Have you done a comparison between all the Fnirsi meters? And maybe the Power-Z? I don't know which one to choose

@TechCornerTV

2 ай бұрын

Hi, power-z didn't want to send one and to be honest, it's not possible for me to buy every gadget, if the manufacturers don't also help to produce the reviews. Hi have here for review the ACHzY to test, but arrived with a broken screen, they sent one for replacement but didn't have the time to do it yet. I have a pile of devices to review and even just to reply to the viewers, I'm answering comment today for more than 2.5 hours, I like to give some time also to everyone that takes the time to leave a comment, is the least in terms of respect I can do, until the moment it will be really not possible, I will do it. So, power-Z no can do, AVHzY can do, just need to fix it :) regarding the FNIRSI devices, I have two or three of those meters, but if I have enough requests I can request to send me the others. Thanks for watching!

Hi, I tried to upgrade the firmware (v0.67) following the exact same steps, but I am never able to complete. It fails at various percentages, sometimes in the erasing part and sometimes in the upgrading part, but it never went beyond 35% of the upgrading part. I also noticed something peculiar: as soon as it fails, one character from the display disappears (for example, "1. Erasing sector: 14%" becomes "1. Erasi g sector: 14%" (in this case, the "n" disappears). So now, unless I managed to find a way to overcome this odd upgrade problem, I am stuck with a "bricked" FNB58. Do you know if I can chat with one of their support engineers?

@philippebruno8039

Жыл бұрын

Well, just to let others facing the same problem know, the support people at Fnirsi suggested I use the USB A directly into my PC instead of the micro USB connector. It went further, but it did not solved the issue. Their second recommendation was to use another computer,(which should have been obvious, except I did not have access to another Windows 10 (or better) computer until now. I tried that and sure enough, all went well. So if someone is planning to perform a firmware upgrade with a Microsoft Surface Pro 6, beware that the USB ports on both the Surface or the hub do not seem to reliably work with the FNB58 firmware upgrade.

@TechCornerTV

Жыл бұрын

Hi Philip, go to www.fniris.cn/support and on the top right corner you have a QR code to join the FNIRSI whatsapp support group. You have there several members of FNIRSI support to help you. Please consider the timezone difference, you may get to wait a bit for an answer. They surelly help you. But, consider trying different USB cables, I had issues with some cables in the past. Thanks for watching!

@TechCornerTV

Жыл бұрын

Hey, I see that you managed to solve the issues, so glat it worked out... I'm answering the comments in sequence and didn't saw this comment left after. Thanks you so much for giving extra feedback on this, really helps others.

@philippebruno8039

Жыл бұрын

My pleasure. You were kind enough to share those tips in the first place, it was the least I could do to share some extra tips.

@bulldogcraft

Жыл бұрын

It took me 4 attempts with it plugged directly into the computer without a cable. It looks like they still need to do some work with the software, but I'm hopeful that they will make it more reliable over time. Too bad they use WhatsApp. I refuse to use it since they've had too many security breaches.

I need the computer software for the FNB58, the link that was provided for the site only has docs.

@TechCornerTV

Жыл бұрын

Hi, see the pinned post here in the comments. You have a Google drive with that information. Thanks for watching!

if I put the device in bootloader mode while connecting with UCB micro cable, before the pc recognizes it, it will restart and start in normal mode, so I can't do the firmware update, when I connect with USB-C cable it works immediately...

@TechCornerTV

Жыл бұрын

Hi, hmmmm for me it worked like a charm! If you're having troubles and you believe it's not working well, joint the FNIRSI whatsapp group and leave a comment. They're quite responsive and will figure that out with you. Thanks for watching!

I am updating firmware. It started successfully but stuck on 13 %. More than 5 minutes waiting without any further progress. What to do now? On the device display I can read: Erasing sector 100%. So, I guess iF I disconnect this device, it will be bricked then? Is any chance to revive it after?

@kakhak

7 ай бұрын

Uh, wow, I finally managed to completely update the firmware on the 10th or 11th attempt. Fortunately, the bootloader does not suffer if the firmware process does not reach completion due to some problem. Chinese software is a total c*rap, as always.

@TechCornerTV

7 ай бұрын

Hi, sorry for this late reply, trying to keep up with all the messages, it is getting harder and harder. I'm glad that you were able to solve it and have it back to life. Thanks for watching.

How can you test a wall charger with a USB-C connection to see its capabilities as it seems to work only over the USB-A connection? I tried a few USB-A to C cables and it would not even power up. Thanks

@ST0LZ

11 ай бұрын

I have no problem testing USB-C only wall chargers. Connect your charger to the USB-C IN port of the meter and ensure PD COM is in the ON possition

@TechCornerTV

11 ай бұрын

Hi, using the USB-C In socket you should be able to test the power supply. Thanks for watching!

you got the software? the official website only has 0.67 firmware, which i have no idea how to flash it. my pc can open the unit as a USB drive, but whats next?? i dont have that big software on the pc either. can you put a google drive link to them ?

@TechCornerTV

Жыл бұрын

Hi, the sofware is available in the website is the USB Meter, just download and install. Regarding the PC recognizing it as USB drive, connect it direcly to the PC socket. It might work. Thanks for watching!

@TechCornerTV

Жыл бұрын

See my review video, you have there all you need in the last chapters. Thanks!

thx my tester came today. it had 0.63 firmware already instaled, but new firmweare is on web. I instaleed V0.68 from 2023-05-06. My 1 micro usb cable did not find devide in windows, I used 2nd cable and that worked. Probably 1 cable did not allow data throuht cable. Second was fine. thx btw for manual

@TechCornerTV

10 ай бұрын

Hi Ivan, glad it worked out. Thanks for watching.

Mine kept freezing/stopping during the format and upgrading process. But each time I would have to unplug and replug it back. Each time I would restart the process it would go further.

@MyRandVids

11 ай бұрын

Just got it to work using a VirtualBox.

@TechCornerTV

11 ай бұрын

Hello! Sorry for late reply, house move and vacations. I saw a followup comment where you solve it, glad you did! Thanks for watching,

@beogeek

3 ай бұрын

@@MyRandVids Same issue, what did you do exactly to get to flash it?

Hello ,can it trigger pd3.1 with 240 watts or 48v ?

@TechCornerTV

8 ай бұрын

Hi, don't think so. The device it seld doesn't seem prepared to handle 240W.... thanks for watching!

The FNIRSI website seems to of failed, I can't download anything from it.

@TechCornerTV

Жыл бұрын

😬 not good... thanks for watching!

@truongthai1440

Жыл бұрын

yes

@TechCornerTV

Жыл бұрын

Hi Frank, I got this FNIRSI google drive with everything in it. Enjoy! drive.google.com/drive/folders/1pZpihFrJUjU4yLVAIxwlofwE2l2trW39

brother me ajuda por favor ele não conecta meu FNB48S com o pc quando abro o programa ele não aparece na lista de dispositivos qual é o driver para instalar

@TechCornerTV

Жыл бұрын

Olá, olha se não estou enganado tens de instalar o driver para o chip CH340, mas de qualquer das formas na aplicação vem incluido o driver. Eu já tenho instalado de testar outros equipamentos nem foi preciso, usam todos o mesmo. Obrigado por assistires.

Does this mean that FNB58 now supports 36V and 48V? Or is it still limited to 28V?

@TechCornerTV

Жыл бұрын

Hello Pepa, I asked FNIRSI and they said because of hardware limitation, you can still go only up to 28V. Thanks for watching!

@pepanovak2530

Жыл бұрын

So it can only check if some charger supports 140W (28V 5A)? Or it can detect 240W but trigger only 140W? I am considering buying it and hope that it will be usable with next-generation chargers.

tks for this--i finally got 0.67 to load but it was very frustrating. the manual mentions nothing about bootloader mode and you had to enter it at exactly the right time or it kicks you back out. mine shuts off randomly and at first i thought it was the power bank shutting off. i put a load on it and it still shut down. then i used a power supply and it kept shutting down. the /standby/ time in settings seems to do nothing at all. i did a factory reset and still it shuts down. if i do any of the pd detect tests it shuts down and when i unplug and plug it back in again then it completes the test. it's driving me bugfuck. mine came with v0.63 and it did not include pd3.1 protocol. v0.67 does. your video seems to show pd3.1 on v0.63 which i don't understand--was it an edit cut or something? tks, /guy

@TechCornerTV

Жыл бұрын

HI, sorry this late reply, but I was kind of busy the last week. No, I didn't add editing ti the version, the purpose of the all video is to show how to upgrade to PD 3.1, so I will had to do a lot of editing. Just upgraded and it was working as expected with PD 3.1. I notice, that while using some cables connected to the Huawei power supply (in the review video) that it will not work/detect correctly, but if I connect it directly to the power supply using the USB-A, it will work ok. Thanks for watching!

@gteague

Жыл бұрын

@@TechCornerTV i'm an idiot. i had no idea that for some test you need a separate source of power. i didn't learn this until i got frustrated and bought a much more expensive tester. it just seemed counterintuitive to me that you'd need two power sources plugged in. /guy

@TechCornerTV

Жыл бұрын

Nice, you figure it out... but you don't need two power supplies, just one is enough, just check if you're connecting the power suply to the IN port.

My device has error 04 even after updating. Would you help me?

@TechCornerTV

Жыл бұрын

Hi, that's weird, but to be honest I don't know the meaning of that error. Try the FNIRSI Whatsapp group, they will help you out, are quite accessible. Thanks for watching.

Maaf Bertanya, Apa fungsi trigger, apakah aman untuk charge handphone? Adakah aturan tertentu?

@TechCornerTV

8 ай бұрын

Hi, the trigger is when you force the device a specific protocol, like QC or PD. It is safe to use with a mobile phone, I used with mine with no problem. Thanks for watching.

Does it compare to the Shizuku based testers?

@TechCornerTV

Жыл бұрын

Hi, this products seem to be a rebrand of the ChargerLab. I did talk with the ChargerLab already and they showed some hopeness to send a unit to review, but they only send to USA address, I'm in Europe so it didn't work out. From the specs is pretty similiar, the Shizuku design is pretty similiar to the FNIRSI FNB48 and in terms of features are almost the same. Since I didn't get one for test, I can't tell really the differences.Thanks for watching!

@The_Ballo

Жыл бұрын

@@TechCornerTV Which model ChargerLab? I see at least two and neither have bluetooth

@The_Ballo

Жыл бұрын

@@TechCornerTV Went ahead an bought one. Hopefully it has the feature to see what cables are capable of. I think a lot of my cables are junk

The phone app is on the Google store?

@TechCornerTV

4 ай бұрын

Hi, yes and I believe you have the QR code to scan in the manual. Thanks for watching.

I need programs for PC and Android.can u help me with this?THX

@TechCornerTV

11 ай бұрын

Hi, all of them are available at www.fnirsi.cn/support website. If you have any problems, you also ask in the FNIRSI support whatsapp group, they respond quickly. Thanks for watching.

@user-cc8ms1gg4q

11 ай бұрын

I found it.thx for your help !

Can any of these testers identify usb ports, i.e., will it identify a 3.0 port, a 3.1 port, a SuperSpeed port, a 10 Gbps port, a 20 Gbps port?

@TechCornerTV

9 ай бұрын

Hi, not really, it can it identify the protocols used by that port.

8 ай бұрын

@@TechCornerTV it can , using USB-C-E-Marker

To all who bricked his FNB device. Just try another laptop or PC. the same happens to my one. I tried around 50 times on my laptop on different ports and cables and every time I received random freezes without any chance of success update. As I understand there are no dependents on a Windows version, it looks like the device is very sensitive to the USB voltage of PC, so I just tried another device and flashed it instantly from the first attempt.

is it possible to update mac computers?

@TechCornerTV

Жыл бұрын

Hi, I didn't tested, but I do think that is possible to copy the firmware to flash drive that appears on the computer and update without the software, not sure of this. Reach out FNIRSI on theirs whatsapp group to be sure. But, you probably can run the application on the windows emulator on mac, but that will a bit hassle! Thanks for watching!

@vlad-koshkin

Жыл бұрын

I don't have any emulators, I don't want to bother with that...Okay, thanks. In a word, if I have a mac, then it will not work to update

How do you get this thing connected to Bluetooth?

@TechCornerTV

Жыл бұрын

Hi! In this video I show how to do it kzread.info/dash/bejne/opqJxrFmncKco5c.html , thanks for watching!

@blaise2628

10 ай бұрын

I'm interested in this too, what time into the video is it please, I couldn't find it. Thank you.@@TechCornerTV

Thanks, I couldn't enter bootloader mode ^_^

@TechCornerTV

11 ай бұрын

Hi there, glad I could help and thanks for watching

Bay link please

@TechCornerTV

Жыл бұрын

Hi! Sorry, didn't understand what you're asking!? Thanks for watching!

No access to the website to download.

@TechCornerTV

Жыл бұрын

Hello, you can access everything on this shared FNIRSI Google drive folder drive.google.com/drive/folders/1pZpihFrJUjU4yLVAIxwlofwE2l2trW39 . Thanks for watching!

@USMCasper

Жыл бұрын

@@TechCornerTV Appreciate it. This was the one video that help me get it all updated properly. Although the C to F on Temp just changes the letter and not the temp conversion.

Product is garbage - screen flickers then goes out at random intervals and only comes back with a reboot. (Firmware 0.63)

@WogChilli

Жыл бұрын

I get the same problem when I plug my S22 or my Ts101 usb c soldering iron it restarts

@TechCornerTV

Жыл бұрын

Hi, that can be because of the power supply, that behaviour, if I'm not wrong, is described in the TS101 user manual. Thanks for watching.

@TechCornerTV

Жыл бұрын

Hi David, sorry to hear that, you might have a bad unit. Try reaching out FNIRSI support on whatsapp. I love my unit, no problems at all. Thanks for watching!

@lincomatic

8 ай бұрын

i had the same problem. it’s power supply problem. just hook up power to the pc input. it will stop spontaneously rebooting

no one app work, this stupid crap item dont have retro MICRO USB in package WTF !! I think, fakn USB or this crap dont know use W11