Thanks for reviewing this brand new unit! I totally agree, its for basic measurements and I think it will do this very well! Its impressive how cheap such equipment can be produced today.

@TechCornerTV

3 жыл бұрын

Yes... and very easy to use... of course as its limitations, but yeah... I liked. As I explained, if you're starting you'll use it with arduinos and low complexity projects, more than enough 😁 thank you for watching and your nice comment! 👍

I like the fact it has a built-in function generator in it. That's handy! A lot of the cheap oscopes don't offer that.

@TechCornerTV

3 жыл бұрын

Yeap! And you also have FFT mode already included, its a payed feature in lots of oscilloscopes... thanks for watching!

Thanks for reviewing and giving some insightful information on this scope. Much appreciated.

@TechCornerTV

3 жыл бұрын

Glad it was helpful! Thanks for watching and your comment.

Thank you for making this nice review video. I'm thinking about getting started with building my own modular synthesizer modules, and this scope is one of the tools I'm considering to add to my toolset. I think this scope will be good enough for my needs, and your video was helpful.

@TechCornerTV

3 жыл бұрын

Glad it was helpful! I might suggest for you take a look in the this one kzread.info/dash/bejne/aHV3x8F_YtPVfNo.html where I answer questions made by the viewers related with the oscilloscope. If you want to enter the giveaway to try to win this oscilloscope (if you haven't already) you gotta move fast, this giveaway ends tomorow. See this video kzread.info/dash/bejne/rJiNm6azaN26acY.html it explains what you need to do enter the sweepstake... spoiler alert, you already made 33% by commenting this video 😁 Thank you for watching and your nice comment.

Thanks for making this video!

@TechCornerTV

3 жыл бұрын

Glad it was helpful! Thank you for watching and commenting! 👍

I enjoyed your video so much and learned a lot about the operation of this interesting scope. Thank you.

@TechCornerTV

10 ай бұрын

Hi, Glad you enjoyed it and thanks for watching.

Very informative review. Thank you!

@TechCornerTV

3 жыл бұрын

Glad it was helpful! Thank you for watching and for leaving this comment, means a lot! If you need more information, just let me know.

Very thoughtful review of the FNRISI 1014D. Thanks

@TechCornerTV

7 ай бұрын

Hi, glad it was helpful! Thanks for watching.

Scope came today. I unpacked it and now I am watching your review. Thanks!

@TechCornerTV

3 жыл бұрын

Hope you enjoy it! Take a look in the other comments please and share if you notice the same problems with ac/dc coupling or low voltage measures. Is the frequency showing correctly? Thanks for commenting and watching the video.

@TechCornerTV

3 жыл бұрын

Can you write me to social@techcorner.tv, I detected some issues with my unit and would like to exchange some e-mails to see if you have the same issues or is just mine that is a faulty unit. I'll appreciate that a lot. Cheers

thank you for the nice review, this would be excellent for my lab

@TechCornerTV

3 жыл бұрын

Hello Jason, glad it was helpful! You may take a look also on the OWON SDS1102/SDS1104 I have also a video here about it, no so easy to work but has some extra functions and the price is almost the same. Thanks for watching. Cheers!

Thanks for the review on this scope, I was looking for one with a built in frequency generator/counter.

@TechCornerTV

3 жыл бұрын

Glad I could help! thanks for watching and taking the time to leave this comment! 👍

@anthonykay5100

2 жыл бұрын

What is the voltage output of the function generator and is it adjustable?

I've been looking for a good entry level scope and this looks like it might be it, I appreciate your review, it seems to be one of the only ones out there for this model. Cheers!

@TechCornerTV

3 жыл бұрын

Glad I could help! It is a "simple" oscilloscope but for the "normal" tasks measuring signals and that kind of stuff, it will do the job, more advance things like using math functions to add a signal value to the second channel or stuff like that, you'll need something more robust. Thank you for watching and your comment!

I never had an oscilloscope and I am looking for one on Ali express now and found this one. Decided to see on youtube if someone did a review. Yours is very nicely done and you have shown everything. Of course I would like to take part in the contest :) Muito obrigado por o video. I just searched on your website and its not really clear where to leave the information.

@TechCornerTV

3 жыл бұрын

Not there yet, I have do the review of the other test equipment first and in the end of this month or start the next month I will post a video explaining how everything is going to happen, that video will be clearly identified as giveway rules or something like that, just subscribe and keep watching. When the video is released, the website will have a zone created so you can leave there your e-mail. Thank you for watching and best of luck for the "contest", its more a raffle... something like that! Just to be clear and to follow the rules, KZread is not affiliated with this "contest" in any way.

Very usefull review. Thank you!

@TechCornerTV

3 жыл бұрын

Glad it was helpful! Thank you for watching.

Thanks for this review video.. it helps thank you..

@TechCornerTV

3 жыл бұрын

Glad to hear that! Thank you for watching and for your comment! 👍

As always, a very comprensive review, enjoy your channel. Tom

@TechCornerTV

5 ай бұрын

Hi Tom, I appreciate your comment and I'm glad that enjoyed. Thanks for watching.

thank you, this would be a great device in my lab

@TechCornerTV

3 жыл бұрын

Best of luck!

Thanks ,for nice review.

@TechCornerTV

2 жыл бұрын

Hi! My pleasure, thanks for watching! 👍

Great Review. Thank you

@TechCornerTV

3 жыл бұрын

Thanks for watching!

Nice Review. I've been looking for an entry level scope and this seems perfect for me.

@TechCornerTV

3 жыл бұрын

Nice I could help! Thank you for watching and your nice comment!

amazing scope for DIYers and tinkers! very nice video!

@TechCornerTV

3 жыл бұрын

Thank you very much! Yeap, totally right in your comment! Thank you for watching

Great video, very informative. You have a new subscriber. Many thanks

@TechCornerTV

3 жыл бұрын

Awesome, thank you! Take a look also in the Giveaway video if you're interested in wining this unit... I will offer to one of the channel subscribers! Good luck 🤞

That product is a wonderful tool for a starter like me. Thanks for the time and effort to review this product. I'm from the Philippines and I'm really an Electronics enthusiast and starting to put up my own shop in the future. This would be a good additional to my tools collection. Thanks and have a Nice Day!

@TechCornerTV

3 жыл бұрын

Thanks for sharing!

@erin19030

Жыл бұрын

I am not a starter and have my old Tektronix 453 that I used at IBM from back in the 1960’s. I liked the price for this one, $180. It will sit on my experimental circuits bench as my 453 sits on my troubleshooting bench.

@erin19030

Жыл бұрын

Check the styrofoam packaging more closely for the power block. Mine sat in the box for two weeks as I bitched about not getting one

@erin19030

Жыл бұрын

My only scope for years was a portable Tektronix 453 that i used at RCA Labs. It was a parting gift given to me whenI retired. Imdid buy this one for my second lab bench.😊

Thanks for this review. I am looking for an affordable oscilloscope. I like the FNIRSI-1014D, given its price and capabilities, so I wanted to know more about it. Your review helped me a lot with that!

@TechCornerTV

3 жыл бұрын

No problem! If you need me to add something here that you needed to know and wasn't on the review, just leme know. One thing I forgot to mention is that it supports FFT mode, so you can use it to read signals like a sectrum analyser... sort of 😜 Thank you for commenting 😁

Doing a Google search for FNIRSI 1014D manual brings up a PDF file of the user manual, worth a download because the printed one that came with the scope is too small to read (at least for my old eyes).

@TechCornerTV

Жыл бұрын

Hi, How I understand you 😃 I also downloaded the manual, I have the same problem. Thanks for watching!

Thank you for this review. we just got one FNIRSI 1014D at work and I realy like it, the screen is super clear. would love to win this scoop for my home test bench. Thank you for the opportunity

@TechCornerTV

3 жыл бұрын

Glad I could help. The one I have with the last upgrade become near perfect. Of course with the know limitations, but with no bugs! I have to confess I will miss having this oscilloscope around 😢 Hope the winner give it a good use! 🤞

Hey, so i'm looking for a cheap but decent beginner's scope to be able measure and monitor real time voltage vs current waveforms on a pwm triac based circuit that i'm building to drive an ignition coil and a dc motor as well, to spin spark gap spheres. I want to feed the coil with minimum current draw, so I want to be able to monitor current dwell time along with voltage. I will need some kind of current clamp to do this. Is this scope you show here capable of doing this? I was also checking out the ones you mentioned from Hantek, and also the Kiprim DS1202 looks pretty simple. I am new to these scopes and need some guidance. There is a smaller blue AC clamp from LOTO (AC05A). Will this work with the 1014D? What about the Kiprim? Looking to get one of the three scopes I mentioned above. Receiving one from you would be awesome, but I would want to make sure it would work with my formentioned circuit. Also I will probably need a 10x probe for current and a 100x probe for voltage, as it'll be pulsed with 400 vdc. Anyway, not asking for the free scope, but at least maybe some guidance here with the formentioned scope choices and compatibility with good 100x probes for my application. Thank you for at least reading this.

@TechCornerTV

2 жыл бұрын

Hey Mark... when I can I give free scopes, that one was given last year, right now I have the FNIRSI 138PRO on a giveaway, you can try to win, it will run for more 14 days, also on the giveaway the Uni-T UT61E Multimeter... a very nice one. Regarding the current probe, I think it will be ok, but please understand that the Loto is a special case, everything is dealt on software, so I'm not sure that the values read on the probe will have a direct correlation on any other oscilloscope, but in theory it will work. Thanks for watching! 👍

Great video!

@TechCornerTV

2 жыл бұрын

Hey Dan, thank you, I really appreciate that you took the time to comment 😁 thanks for watching 👍

Thank you very much for your report, I bought one of these oscilloscopes and they really are absolutely right, in terms of price and performance, it is excellent.

@TechCornerTV

2 жыл бұрын

Hey Carlos, great to hear! I hope you're enjoying it. It isn't very precise in measurements, but is so quick and easy to work. Really fun to use. Thank you for watching and your comment! Cheers. 👍

The term you’re looking for is “sweepstakes”. Thanks for the review. It’s comprehensive, factual, and entertaining. I’m looking forward to your other reviews.

@TechCornerTV

5 ай бұрын

Hi, thanks for watching and you nice comment/support! PS - You're right, it was "sweepstakes" that I was looking for.

After watching the nice reviews I finally decided to order1 unit n looking forward to early delivery

@TechCornerTV

3 жыл бұрын

Hello Chan! Hope you enjoy it 😁 thank you so much for watching and commenting. 👍

@ChanYC8829

3 жыл бұрын

Hi Mr Hugo. I received the Fnirsi 1040D as the delivery period was 8 days. Generally run through Few tests with an external tone generator found working satisfactory. The screen display focusing was excellent sharp. Very easy to operate and the functions display was informative and accurate. I am glad and satisfied with the performance.

@TechCornerTV

3 жыл бұрын

@@ChanYC8829 Hello Chan! Nice it worked out well! So happy for you. Thank you for sharing. 👍

If I want to use this to measure signals on small 5V hobby projects with arduino, sensors etc. is it a problem that this oscilloscope does not have a mains earth connection?

@TechCornerTV

2 жыл бұрын

Hello, I don't think so. You'll be working with low voltage, but anyway, that doesn't seem to be the main issue. The problem is connecting the common of the two probes to different commons, at least is what they say in the user manual. Cheers! 👍

Thanks for a very good explanatory Video. I've got a Yaepook on its way & looks identical to this. One things worrying me. Do you have to buy or get any Firmware or updates to make them work, or keep them working?

@TechCornerTV

Жыл бұрын

Hi, no, you don't have to buy the firnware, just to to www.fnirsi.cn/support and download the latest firmware for your device and install it. I have here a tutorial how to upgrade techcorner.tv/eletronics/tutorials/fnirsi-1014d-how-to-upgrade-the-firmware/ . Thanks for watching!

The most complete review for now

@TechCornerTV

3 жыл бұрын

I will publish in the following days (this week) a followup video answering questions about this oscilloscope and showing "stuff" that people asked. Thank you for watching and for your comment! 👍

The screen looks more vibrant and the function generator add on with that price is too good for beginners and few startups. Thanks for showing us. Hope to see more and more videos on this Oscilloscope like the testing Power section ripples.

@TechCornerTV

3 жыл бұрын

Totally agree! Well on this oscilloscope it might not be possible because I am giving this one to a subscriber, but I will continue with other models, the next one it will be Rigol MSO2102A (mixed signal oscilloscope wiht function generator) and it will be others in the future.

@lakshminarayanaaithal1081

3 жыл бұрын

@@TechCornerTV waiting for your next video and could you pleas make s detailed video on low price Logic analyzer?

@TechCornerTV

3 жыл бұрын

I have here one cheap logical analyser for review, I can go with that video after the videos for the giveaways, sure 👍

⚠ For those that already bought this unit ⚠ The auto key is your friend, my opinion on this oscilloscope is the same you saw on the video, awesome for begginers, BUT if you change the parameters of the signal, for example on a function generator, you SHOULD press AUTO. The oscilloscope (the one I have here at least) may give you wrong values and has a lazzy update. I was about to send this unit back because of this. Do you have the same issue on your unit?

@TotiTolvukall

Жыл бұрын

Hey Hugo! Yes, I've been having the same issues with my FNIRSI 1014D. These issues as well as the general inaccuracy in voltage measure and the fact that it is really not a 100MHz scope made me question my acquisition. On a hunting trip through the wilderness that is Ali Express, I stumbled upon a Rigol MSO5072 that included ALL upgrades except the 4-channel upgrade and the bandwidth upgrades - for only about US$900-and-some-change. Couldn't pass on it. I can without doubt state that I upgraded from a bicycle with a flat tire to a fully equipped F1 racer (esp. if one takes a moment to visit the EEVblog). Now my 1014D feels like a Tonka Toy :)

nice review!

@TechCornerTV

3 жыл бұрын

Glad you enjoyed it I giving this equipment away, if you're interested see the other video in the channel about the giveaway... 😁 thank you for watching and your nice comment! 👍

The giveway is not yet ready, you'll have a special video in the channel with all the procedings and rules, subscribe and be alert! Meanwhile, what do you think of this oscilloscope? And the review? I tried to have a more modern like review for some eletronic equipment instead of only some geek surrounded by tech gear talking 😉 did it worked? Should I continue with this approach? Leave you comment bellow! Thank you for watching.

@Stinktierchen

3 жыл бұрын

I think 37min is getting a bit too much for a simple review. Especially this oscilloscope isnt that spec filled. I would suggest if it is not absolutely necessary to try to cut things down. Of course if a product has A LOT of functions and options then you cannot make it shorter. But people tend to run away if they see too long videos. Especially reviews is more about taking a quick but deep look into a product(that helps to decide wether buy it or not) but it should not end up as a trilogy ;) But of course people can jump and skip parts in a video. So if a video is very long it helps a lot if you devide it in sections. There is an option for that.

@TechCornerTV

3 жыл бұрын

@@Stinktierchen Huge thank you on this very productive comment! I tried to be more succinct in this review, but as you just witnessed I failed miserably 😊 but yeah, I'll try to add section, I started these channels in january a bit more than 3 months ago, so still getting the hang of it, but yeah, I'll try to be more succinct in the next reviews, probably a better editing will help and cut the dead times... I don't know, I have to organize better what I need to talk... kudos for your comment, very constructive. 👍

@Stinktierchen

3 жыл бұрын

@@TechCornerTV You didnt fail. Sometimes a long review is necessary, because products can be very complicated, especially electronics. I am sure with time you will polish your videos and leave out the dead time as you mentioned.

@SolHuebner

3 жыл бұрын

I think a long review is not an issue but you might want to put jump points in the description so that people can jump to sections in the video they are most interested in?

Question please. When the frequency measurement for a channel is selected, what is the lowest resolution that it can display - I.E. can a 2.35 Hz reading be shown for this low frequency? For voltage, 2.3xx OR in summation, how many decimal places can be displayed for measurements? Thanks for a concise review of this scope's capabilities.... Hank

@TechCornerTV

Жыл бұрын

Hi, I no longer have mine to check, but, it should be able to read frequencies in the Hz range without a problem, normally the issues appears in the higher frequencies where the ADC has no speed to capture all it needs to present a nice waveform. Thanks for watching!

How to calibrate the built-in signal generator frequency? mine seem to be off frequency by 1700 Hz

@TechCornerTV

Жыл бұрын

Hi bud, already respond on FNIRSI whatsapp but I really can't help there, the support is very accessible and probably will give you an answer. Thanks for watching!

Great review , this product is perfect for a mid-level engineer/technician.....,

@TechCornerTV

8 ай бұрын

Hi, thanks for your nice comment and also for watching!

The price determines the purpose, this oscilloscope is suitable for my use! Thank you for your introduction

@TechCornerTV

10 ай бұрын

Hi, Glad it was helpful! If this can do what you need to be done, you shouldn't spend more if you don't need to. Thanks for watching.

Great Review ! Thank you ! I would love to win such an instrument

@TechCornerTV

3 жыл бұрын

Best of luck! If everything goes according to plan, I will tomorow post a new video explaining how to participate in the sweepstake! I still have to record and edit, so probably tomorow will be here, thurday in the worst caser scenario! Thank you for watching and for your kind comment! 😁

Very nice unit

@TechCornerTV

3 жыл бұрын

I think so too! Thanks for watching and your comment.

thanks great help

@TechCornerTV

2 жыл бұрын

You're welcome! Thank you so much for watching and your nice comment! Kudos 👍

I had bought a oscilloscope looking to do a different task I spent money I do look inside computers I read programming c in a nut shell didn't quit understand logic chips . I just learn thanks

@TechCornerTV

2 ай бұрын

Hi, thank you so much for your input and watching!

Thank you for your reviews - I enjoy watching. I’m an amateur radio operator and have several older Tektronix scopes, but have been wanting something color. I am interested in something to use at 30 Mhz and below and like the price of the 1014D. Was wondering if you know about firmware updates - have the issues been fixed ? Thank you

@TechCornerTV

Жыл бұрын

Hi, thank you for following my videos. The last update I know for the 1104D firmware was in 2021 (v3.0), if memory doesn't fail me. After I'm not aware of new versions. Thanks for watching!

Can this replace my old millivolt meter ? Can it accurately read 250 kHz - .3 mV ? Does it got a VRMS reading ?

@TechCornerTV

Жыл бұрын

For accuracy, I will choose the Owon instead. Not perfect but way better in that department. This will allow to analyze signals. But responding to your question, the unit I had seems to be problematic, I had viewers that reported working without problems with it. Thanks for watching! 👍

Estava pesquisando um osciloscópio e encontrei este e sua explicação foi muito boa, caso não tenha a sorte de ser sorteado por pretendo adquirir um. Obrigado pela seu vídeo.

@TechCornerTV

3 жыл бұрын

O sorteio deverá ser em meados de Junho, até lá ainda vai sair as reviews dos restantes itens, caso não sejas sorteado, podes sempre utilizar os links de afiliado para adquirires o teu e sempre ajudas o canal e a dar-me a possibilidade de tempo a tempo oferecer algum equipamento aos subsicritores/inscritos do canal! 😁 Obrigado por ver e pelo comentário.

Thanks mate, i'll buy one I cant lose a that money. I've subbed

@TechCornerTV

2 жыл бұрын

Hey there. Thank you for watching and your comment 👍

@50Hz

2 жыл бұрын

@@TechCornerTV Looking forward to watching more of your videos.

A built in frequency generator! Nice!

@TechCornerTV

3 жыл бұрын

Yeah! I know thats a limited one, but it is great to test how a function generator works and lets be honest, a hobbyst uses low frequency projects... arduinos, stm and stuff like that, so the function generator is enough. thank you for watching and your comment!

Gracias por la review, es muy interesante para alguien como yo que la electronica es un hobby, saludos desde Barcelona,España.

@TechCornerTV

3 жыл бұрын

Saludos! Barcelona is a beautiful city, benn there, loved! Thank you for watching and your nice comment! 👍

Thanks,fnirsi 1014d is the best product

@TechCornerTV

2 жыл бұрын

Hey Hamdani, I wouldn't say the best product, its a fine product for the price, very easy to use. Thanks for watching and comment!! 👍

Hey, I left a comment on another video about needing meeting very basic. It was a little portable scope for 110 bucks or something. But I don't like how small everything is. This seems like a better form factor?

@TechCornerTV

Жыл бұрын

Hi, this device is very easy for new users, has a very good and bright LCD screen, but is not the most complete of the bunch, you have more functions on the Hantek 2D10/2D15. It depends on the budget and what you really will use. Anyway, if you buy it, don't forget first to click on the affiliate shortcut link to help the channel ( www.techcorner.tv/aliexpress ). Thanks for watching!

@XtianApi

Жыл бұрын

@@TechCornerTV 10-4 sir!

Thank you for making it easy to understand. Just got one for Christmas. I'm having problems setting up the Signal Generator. If I want to inject a specific sine wave signal of e.g. 2 Volts p-p into an audio amplifier, how do I obtain that?

@TechCornerTV

6 ай бұрын

Hi, the signal generator has a fixed voltage/amplitude of 2.5V. It's really a pitty, but it is not possible to change that. Thanks for watching.

Thank you for a good review. Even much more expensive equipment has shortcomings. Not a bad oscilloscope for this price.

@TechCornerTV

3 жыл бұрын

Very true! I did some more testings about it has some issues, thats true. But for the moment, I stick with my opinion that for begginers it would be a great buy, honestly, as I already mentioned over here in other comment, I don't have any experience with other oscilloscope other than this and my Rigol and probably there out there other brands that are as easy as this one, but, my review is about this one and for what I saw I liked. A second analysis show some issues with low voltages, but still investigating those. Thanks for watching and your comment,

@vvavvan1

3 жыл бұрын

@@TechCornerTV It is possible that the manufacturer will eliminate some shortcomings in the new firmware.

I just got one of these but I'm quite frustrated with it. I followed the guide as best I could, but can't seem to get a Lissajous pattern using the onboard the signal generator. Has anybody been able to do this?

@TechCornerTV

2 жыл бұрын

Hello Maurice, for a Lissajous pattern you will need to siganl sources, the internal signal generator will give only one, because for that kind of signals we are talking about X and Y, that's why it's called the XY mode, in this case the channel 1 will provide one set of coordinates and the channle 2 the other set (y), is only from the math between the 2 that you get some kind of figure. Hope it helped! Thanks for watching! 👍

What's the input voltage to power it, because in my country we use 220v ac

@TechCornerTV

2 жыл бұрын

Hello Kekeke, the oscilloscope inputs 5V 2A, you can use any power supply you wish to provide power to the oscilloscope. It is delivered with a USB to 3.5mm jack that you can connect to any USB power supply, so no problem about you country voltage, mine also use 220AC. Thanks for watching. 👍

Does this have a curve tracer function to test components in circuit

@TechCornerTV

7 ай бұрын

Hi, can you share a link of a video with that function? I don't think iit has. Thanks for watching.

I will be glad to help your page get started. Could you show how to calibrate the leads and test an actual circuit that you have tested with your expensive scope to see how close the 1014D compares? Thank you Chuck

@TechCornerTV

3 жыл бұрын

Hello! I will not amke promise because I might fail, but I will try. I'll have this oscilloscope only until 5 of June, after that, is packed so the winner can collect it. But since I have this request and some users mentioned the FFT and few other issues, I will try to record a new video this week with all these topics before it is sent to the winner. Please notice the TRY, because I still have to the video for the next giveaway (Korad KA3005D) and a few more stuff, but I'll try to get this new video in. I can't promise to analyse a actual circuit, but I can compare the results real time between my Rigol and this unit using a function generator. Thank you for watching and your comment! Really important 👍

I can not find any answers to this question. Will this oscilloscope measure voltage vs current in XY mode?

@TechCornerTV

Жыл бұрын

Hi, just replied! 🤜🤛

Tell me sir can i test smps switching out put voltage test direct.

@TechCornerTV

Жыл бұрын

Hello, not sure if I understood the question, are you talking about the output of function generator? Tha one has a fixed amplitude of 2.5V. Thanks for watching,,

@lasanthabandara3162

Жыл бұрын

I want see the smps power supply output frequency can i test hi voltage 10x with (1014D oscilloscope )

Great review! ...Could you show the FFT function at some time? Best regards!

@TechCornerTV

3 жыл бұрын

I'm gonna be honest with you, I don't know I get the time to record that, I am a little overwhelm with work, I have the Consumer Electronics/Gadgets channel, electronics and mailbags and the first two are in portuguese and english, so double work. Im not complaining, Im loving it, but I still have to record the video for the review of Korad power supply, JCD soldering station and UNI-T UT61E (this one I am not sure if still gonna do one) and the videos for giveway itself, so a total of 12 videos only for those three products. But I can explain, in FFT mode you'll have the normal signal on the screen but also a 1/4 of screen division with a "kind of" spectrum analyser. Really sorry not being more helpful, but if I manage to get the time I'll make a followup video before sending the oscilloscope to the winner! Thank you for watching and participating.

i like your smile on the end

@TechCornerTV

2 ай бұрын

Hi, thanks so much for your kind message and for watching the video! 🙏

But we CAN'T change voltage amplitude generated by the signal generator. Can we?

In the signal generator Amplitude variable option is there or not.... Pls clarify

@TechCornerTV

2 жыл бұрын

Hello Ramar, no the amplitude/voltage of the *function generator* is fixed to 2.5V... obviously you can change the amplitude of the signal on the screen for each channel. So to recap, *function generator* fixed amplitude, signal on screen you can change the amplitude of the signal. Hope it helped. Thanks for watching. 👍

Excelente equipamento. Espero ser o ganhador, rsrsrs. Parabéns pelo vídeo.

@TechCornerTV

3 жыл бұрын

Muito obrigado pelo apoio! Desejo-te muita sorte, tenho de ser imparcial, mas desejo mesmo que vá para alguém que lhe dê um bom uso!

Can I read PWM of the outlet DC of 240v with this ocsilloscope?

@TechCornerTV

3 ай бұрын

Hi, sure you can. Since it doesn't have a earth connection, it is ideal for that. Don't forget that you need to use the probe in the correct compensation and if you mess up will burn the device. Thanks for watching.

Please software for update dso 1014D

@TechCornerTV

2 жыл бұрын

Hello, I don't have it anymore. I gave the oscilloscope in one of the channel giveaways. Did you tried to enter the FNIRSI whatsapp support group?

@TechCornerTV

2 жыл бұрын

techcorner.tv/eletronics/tutorials/fnirsi-1014d-how-to-upgrade-the-firmware/, I've update the article with the download links for the firmware. Enjoy!

@APMElectronicsnewtech

2 жыл бұрын

@@TechCornerTV Thanks

@TechCornerTV

2 жыл бұрын

@@APMElectronicsnewtech No problem

Which instrument do you recommend for electronics 1014D or 2C23T FNIRSI

@TechCornerTV

7 ай бұрын

Hi, you're comparing too really different devices. 1104D is just an oscilloscope but it "allow you to work" with bw's of 100Mhz and has a very nice 7" monitor and is basically for desktop usage. On the other hand, the 2C23T, has also 2 channels but you will have only 10Mhz of bw and a very small screen when compared with 1104D. You gain a multimter also in there and a better signal generator. Both are ok for electronics, what matters is the way you'll be using both of them. If you don't have a multimeter already and don't mind the screen size and don't need cursors or XY mode, the 2C23T can be a very nice option. The multimeter is pretty decent. Thanks for watching.

@ashrafkarjiker6888

7 ай бұрын

Some guys say the 1014D ain’t a true 100Mhz. I like the 2C23T and was hoping you can connect an amp clamp probe to the instrument to easily measure current

Did the voltage reading error on this ever get fixed?

@TechCornerTV

2 жыл бұрын

Hi, I don't know because I've giveaway this oscilloscope to an subscriber! So can't check anymore... sorry I can't help there. Thanks for watching! 👍

@plainoldsteve452

2 жыл бұрын

@@TechCornerTV I received my 1014D yesterday, CH1 reads 0.2v higher than CH2. CH2 is correct according to my other 2 multimeters (one many years old, the other only 2 days old). My 1014D came with V3.0 installed so I don't think there is a newer firmware update.

@plainoldsteve452

2 жыл бұрын

@@TechCornerTV Oh, in case it was not answered before, CHX switches between triggering off CH1 or CH2

The best oscilloscope for inverter card maintenance

Good review. Just i was looking for a basic cheap osciloscope, this is a Good option. Maybe you could do a review of the hantek dso 2d10 that also has a function generator and is around $250

@TechCornerTV

3 жыл бұрын

I'd love that, I have to gather more subscribers and views to try to convince the brands to let go some equipment for this reviews... this can be pretty expensive... for now, I have a few items already in backlog to record, but I'll try to reach out to Hantek and see what is theyr feedback. Thanks for watching and your nice comment. 👍

Mate you recommend this product on a automotive work?

@TechCornerTV

Жыл бұрын

Hi, I saw several viewers that do use this for automative work. But it will be more efficient something with the battery already inside like Micsig STO1004 that has a touch screen. If you want something in the same price range you have, you have the portable ones, like the new FNIRSI DPOX180H (awesome device with review already on the channel) or the previous review of the Tooltop ET829. Every device I mentione has a review in the channel. Thanks for watching!

Does this oscilloscope is able to display from usb on pc? Or only export on usb.

@TechCornerTV

3 жыл бұрын

Hello! For what I understood from the manual it creates a drive where you can access the saved data, like images, don't seem to have the hability to display the data on the PC. Thanks for watching and your comment!

@tca3899

3 жыл бұрын

@@TechCornerTV Thank you

hello, what a great informative video .. thank you for posting this ... i am currently trying to repair a floppy disk drive and have thought about this particular oscilloscope .. one set of instruction for checking the output of a read/write head is .. 1. Display:A + B, B inverted 2. Time/div: 20msec/div 3. Volts/div: 20mV/div Does this oscilloscope do that sort of configuration? Thank you.

@TechCornerTV

Жыл бұрын

Hi Peter, let me be totally honest with you, I did that review almost 2 years ago and I gave away the oscilloscope to a channel subscriber. I don't remember at the moment, but I almost 100% sure that oscilloscope doesn't mathematical functions. If it's not in the video, don't have it. If you really need that, I suggest you to see this video where I review the Owon SDS1102 and the Hantek DSO20D10 in a showdown ( kzread.info/dash/bejne/m6Waz5OpfpW7kcY.html ) in minute 7:50 ot that video, you have a comparation table and I also don't see there math functions, so 1. of you list will not be possible. Take a look in the video, you will probably see something you like. I have also reviews for both oscilloscopes mentioned here. Thanks for watching!

How do you change the menu language? Nothing in the manual I downloaded, all chinese!

@TechCornerTV

Жыл бұрын

Hi, you don't. You need a new firmware to update the language. I recomend you enter the FNIRSI whatsapp group and ask for support. Thanks for watching!

So, if I don't care about adding 50-70 euro,what model do you suggest?

@TechCornerTV

3 жыл бұрын

Hey there! Ok, this is my personal opinion but for more 70€ (238€ total) you can already buy the Rigol DS1102Z-E (geni.us/GDqA2Pj) that has already decoding functions and it is packed with dual 100Mhz channels, 2 external triggers, 1GSa/s, memory depth 24Mpts for 1ch/12Mpts for 2ch, USB/Ethernet to connect to the PC and 30K wfms/s. Hope it helped. Thank you for watching and for your comment! 👍

You forgot to open the case of the 1014D, a very importand thing! Now iI need to do it with my own one. Got one 4 weeks ago ....

@TechCornerTV

6 ай бұрын

Hi, that was my first oscilloscope video... not confident enough at the time 😁 thanks for watching and enjoy your new oscilloscope!

Is it possible to calibrate the probe in this model?

@TechCornerTV

2 жыл бұрын

Hi Chairul, sure it is, take a look in this video ( kzread.info/dash/bejne/aHV3x8F_YtPVfNo.html ), I show there how to do it. Thanks for watching! 👍

I need to test line voltage 120 / 240 single and 3 phase so picked this unit and use with usb battery bank…comes with bonus High voltage probe 1000 volt!

@TechCornerTV

2 жыл бұрын

Hey Glenn, nice to ear, the 1000 volts probe is really a bonus and you're right the fact that works with a power bank is a nice feature. Thanks for watching! 👍

Hi RechCornerTv, very great video...let me know about USB feature...may a have some help software to data aquisition or data analisys ?

@TechCornerTV

3 жыл бұрын

No! The USB is used only for firmware upgrade or download the image and waveform captures. No data aquisition or analisys... Thank you for watching and commenting! 👍 I have 2 more follow up videos to this one and also a giveaway video of this unit. You might want to take a look in them... cheers!

Oscilloscope and generator, two in one is good for an electronic workbench

@TechCornerTV

3 жыл бұрын

Yeap! Low price and smaller than the normal size, if you have a small space, it will be a great fit. Thank you for watching and comment.

you have no link to your website? but i want to try and get that scope,I am in holland but english! how can i send my details?

@TechCornerTV

3 жыл бұрын

Hello! I will put the software sweepstake software working during this week between May 3th and 8th, as soon is working I will annouce on the website but also on the electronic channels with a video (I will also experiment with a #short) also, a few more days and you can leave your info for the sweepstake / giveaway, Thanks for watching the video and let me know if you have additional doubts.

Nice review. I just purchased the same and agree with you. It does the job for the price. One thing I noticed is that the AC and DC coupling modes seem to be inversed in the CONF menu. It displays the dc component in AC mode but doesnt in DC mode. Do you or anyone who has this scope see the same problem ?

@TechCornerTV

3 жыл бұрын

Thanks for sharing! I did take the oscilloscope out of the box today again (it is packed to giveaway) and did some test to be able to answer the questions you guys kindly left here and yes, I confirm that the DC/AC coupling is inversed on the selection menu. But man, I do like this oscilloscope, true to be told, I only worked with my Rigol MSO2102A so probably there are others so easy to work, but thies one is so easy to work... really nice, I'm not talking about the specs, just UX. Thank you for watching and commenting this video! 👍

@B_mata

3 жыл бұрын

@@TechCornerTV Thanks for the confirmation. I do mainly microcontrôler electronics so this oscilloscope largely covers my needs. As you said, its si easy to use.

@TechCornerTV

3 жыл бұрын

Can you write me to social@techcorner.tv, I detected some issues with my unit and would like to exchange some e-mails to see if you have the same issues or is just mine that is a faulty unit. I'll appreciate that a lot. Cheers

I need this scope to complete my small work shop

@TechCornerTV

3 жыл бұрын

Yeah, it fits in small spaces! Lets how the sweepstake turns out... 😀

why is the channel 1 bnc ring red and not yellow ?

@TechCornerTV

3 жыл бұрын

Hey! Some product designer tought that will be more atractive to have orange instead of yellow... I supose the person that had that idea don't even use a oscilloscope... 😁 its a bit inconsistent, thats true. Im posting today a new video with the firmware update and after the update, the only quirk is really that one! Thank you for watching and your comment!

I’m watching this review sir because I’m planning to buy this.. new friend sir Difficulty in Electronics

@TechCornerTV

2 жыл бұрын

1104D Its a lot fun to work with, but you should really take a look in my last video about the Hantek DSO2D10... it might interest you! Thanks for watching and commenting! 👍

@DifficultyInElectronics

2 жыл бұрын

@@TechCornerTV my budget is enough sir and already ordered sir at online.. thanks for the info sir...keep safe sir

How do you set up XY for component testing?

@TechCornerTV

Жыл бұрын

Hi, this oscilloscope doesn't have XY mode, I think! I don't have one anymore and I can't remember using it, went to see the features on aliexpress product page and doesn't seem to have XY mode. Thanks for watching,

@James_Bowie

6 ай бұрын

@@TechCornerTV Of course it does! (1) Notice the X and Y labels next to the BNC channel sockets and (2) See X-Y Mode in the function menu.

Subscrevi e fico à espera de receber o osciloscópio :):) !! bom video e excelente canal parabéns!

@TechCornerTV

3 жыл бұрын

Olá! Obrigado por assistires e subscreveres o canal, mas olha só para deixar claro, isto é um sorteio. Para concorrer tens de ir a esta página techcorner.tv/pt/ofertas/sorteio-do-osciloscopio-digital-fnirsi-1014d/ e deixar os dados, lê com a atenção o regulamento no final da página, é curtinho e boa sorte!

i just got this i rather enjoy it

@TechCornerTV

Жыл бұрын

Hi Johnny, I did also. It's pretty simply to use and not very expensive. Thanks for watching and wish you a Happy New Year!

hello. Power supply output voltage.? thanks

@TechCornerTV

3 жыл бұрын

Hello! The oscilloscope is powered by a 5V 2A USB power supplu. Cheers!

hi friend can you please explain how can mesurment the 230v AC with this oscilloscope

@TechCornerTV

2 жыл бұрын

Hello Ali, I don't work with tthat kind of voltage, but this oscilloscope is actually pretty good to test mains, because is isolated, doesn't have a earth connector. You can power it with a battery. But even so, I recomend that you take a look in this video ( kzread.info/dash/bejne/l4mgj5SdhLSdlZM.html ), he explains pretty well what are the problems while measuring that kind of voltage. Hope it helped! Thanks for watching 👍

@aliissa665

2 жыл бұрын

@@TechCornerTV Thanks dear friend on your helping ...👍👍👍👍👍

Olá senhor Hugo! Adquiri uma unidade deste osciloscópio para trabalhar os meus toca-fitas antigos produzidos nas décadas de 80 e 90 dos fabricantes brasileiros Gradiente e Polyvox, colocando-os novamente nos parâmetros adequados de seus manuais de serviço. Penso que o equipamento é muito adequado para este tipo de tarefas que envolvem mais a eletrônica analógica quando os aparelhos em si não eram tão complexos em seus circuitos. Agradeço pelos vídeos produzidos e parabéns por seu trabalho. Saudações da cidade de São Bernardo do Campo, estado de São Paulo, Brasil.

@TechCornerTV

2 жыл бұрын

Olá Fabiano, "senhor" está no céu, para mim chega Hugo 😁 Olha muito obrigado pela tua simpatia e por esta participação tão informativa, gostei muito de ler o teu comentário. Um grande abraço para o Brasil, já faz anos que estive em São Paulo. A ver se um dia volto! Obrigado por assistires e por participares 👍

Wonderful oscilloscope for the price, I like the ingrated function generator. Does the FFT function work fine?

@TechCornerTV

3 жыл бұрын

Yes it does, but to be honest I never needed to use the FFT (ever) and I don't feel confortable to include that in the review...

@SongsForDamnation

3 жыл бұрын

@@TechCornerTV I know, it's not used a lot. I'm interested in that because I have a passion for guitar amplifiers and the FFT function allows to make an harmonic analysis of the overdrive/distorted section

Great review! Are you tested it with 100MHz frequency? Also, I seen one interesting video about FNIRSI - 1013D. The problem is that it does not sense voltages below 1v and only when measured voltage is above 1v, oscilloscope show voltage value on the screen correctly. Could you make this test and write down on the comments have this oscilloscope model mentioned problem or not. Thank you!

@TechCornerTV

3 жыл бұрын

No, I did not tested up to 100Mhz because my Rigol DG1022Z only goes up to 60Mhz, but don't forget, the 3 to 1 rule... you should have a oscilloscope 3 times faster than the signal you're trying to measure, so it should handle signals pretty well up to ~40Mhz. Regarding specifically your question about the voltage bellow 1V, yeah the signal were all over the place, but my Rigol wasn't doing very well also, so I was surprised both ways. So the params were 25Mhz frequency,sinewave with a 1Vpp. My Rigol on port 2 of function generator identified the frequency perfectly at ~25Mhz but the Vpp voltage was around ~1.3V, Vmax around ~650mV and Vmin ~-650mV, that make me think if the problem is on the oscilloscope, the function genarator or the cable... probably the cable. The FNIRSI, some params on port 1 of function generator identified the frequency at 4.64Mhz (??) the Vpp at 888mV, Vmax at -1.06V and Vmin at -1.94V, so again, all over the place. I will try to figure out because the frequency is always around ~4 to ~5Khz weird behaviour. I did notice before. Thank you for watching the video and your comment.

@GlennMartinez

2 жыл бұрын

Thanks to your view I just order one!

@OndrejPopp

Жыл бұрын

This oscilloscope has actually a bandwidth of 30 Mhz and not 💯, see here kzread.info/dash/bejne/q4V_16qDda-rf9Y.html

Thanks for making this video! - Grazie per aver fatto questo video! º¤ø,¸¸,ø¤ºTHANKSº¤ø,¸¸,ø¤º

@TechCornerTV

3 жыл бұрын

Grazie per aver guardato il video e aver commentato! (just google translate) I do understand a bit but, can't speak italian, but thank you for the support! 👍

Super

@TechCornerTV

3 жыл бұрын

I think it is... vey basic, but wonderful to work with...

How did you power up the unit without the ac adaptor?

@TechCornerTV

2 жыл бұрын

Hey Lawrence, well you can power it with any USB charger (even with a powerbank) considering it is 5V 2A, lower than this you«ll have very weird results. Thanks for watching and your comment! 👍

@lawrencereyes6956

2 жыл бұрын

@@TechCornerTV thanks because i just ordered my unit and noticed the ac adaptor head missing. Great review video by the way.

@TechCornerTV

2 жыл бұрын

@@lawrencereyes6956 Yeah... I can't figure what they are thinking, because I am on the FNIRSI whatsapp group (you should join to) and some users report they received 2 chargers and one of them is 1A that will not even work and others like me and you not even receive one... QA there is a concept not implemented yet. But I do hope that you enjoy your and put it for a good use 😁

@stevelowe1997

2 жыл бұрын

@@TechCornerTV I almost threw out my adaptor by accident. It was embedded in some of the styrofoam packing in the box. It was exactly the same thickness as the styrofoam and was also white, so I didn't notice it. Fortunately, when I went to set up the 1014D I realized the adapter was missing, headed down to the basement and found it! Good thing I hadn't tossed the trash yet!

I would love to win an scope! Thank you for the opportunity!

@TechCornerTV

3 жыл бұрын

Hello Luis! Thank you for joining in. The sweppstake ends in June, 5th so please make sure you commented also the giveaway video and you filled the form on the website with your data to sweepstake/giveaway. Only subscribing and commenting on this one will not be enough. If you did it already, good luck to the giveaway!